32
Connecting external data media
Before connecting the data medium, switch the television to stand-by
with »POWER«. Connect the device and then switch the television
on again.
Before connecting the data medium, the television must first be
switched to standby, otherwise files can be damaged.
The USB port supplies the data medium with a maximum of 500 mA.
Use an external power adapter if you want to use a hard drive, for
example, as the data medium.
Do not disconnect the data medium from the USB port when you are
retrieving data.
1Connect the USB interface »USB« of the television and the
corresponding socket on the data device (external hard drive,
digital camera, card reader or MP3 player) using a USB cable;
or
plug the memory stick into the USB interface »USB« of the tele-
vision.
Note:
A bi-directional data transfer as defined for ITE (Information
Technology Equipment) devices in EN 55022/EN 55024 is not
possible.
USB transfer is not in itself an operating mode. It is only an addi-
tional function.
2Confirm the display » Yes« using »OK«.
– The file browser appears.
USB-MODE ----------------------------------------------------------------------------------------------
02Leemaxx 19_en:Layout 1 15.07.2009 10:28 Uhr Seite 32
