574811
33
Zoom out
Zoom in
Previous page
1/52
Next page
33 / EN
Washing Machine / User‘s Manual
Operating the product
5.11 Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Whenever a
programme is selected, frames of the auxiliary
function symbols that can be selected together
with it illuminate. When an auxiliary function is
selected, the inner section will illuminate, as.
C
Frame of the auxiliary function symbol
that cannot be selected with the current
programme will not illuminate.
Also the frames of the auxiliary function
suitable for the current programme after the
washing has started remain illuminated. You
can select or cancel the auxiliary functions
whose frames are illuminated. If the wash
cycle has reached a point where you cannot
select the auxiliary function, the function's
frame goes off.
C
Some functions cannot be selected
together. If a second auxiliary function
conflicting with the first one is selected
before starting the machine, the function
selected first will be canceled and the
second auxiliary function selection will
remain active. For example, if you want
to select Quick Wash after you have
selected the Extra Rinse, Extra Rinse will
be canceled and Quick Wash will remain
active.
C
An auxiliary function that is not
compatible with the programme cannot
be selected. (See "Programme and
consumption table")
C
Some programmes have auxiliary
functions that must be operated
simultaneously. Those functions cannot
be cancelled. The frame of the auxiliary
function will not be illuminated, only inner
area will be illuminated.
• Prewash
A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
• Express
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of rinsing
steps for lightly soiled laundry.
C
When you select this function, load
your machine with half of the maximum
laundry specified in the programme
table.
• Extra Rinse
This function enables the machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk for
sensitive skins (babies, allergic skins, etc.) to
be effected by the minimal detergent remnants
on the laundry can be reduced.
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes,
you may use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when
there is no water in the machine. Press Start /
Pause /Cancel button after this process if you
want to drain the water without spinning your
laundry. Programme will resume and complete
after draining the water.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start / Pause
/ Cancel button.
The programme resumes. Water is drained,
laundry is spun and the programme is
completed.
• Silent Mode
If you are running the programme at night on
special tariffs you may use the silent mode.
Spin steps are cancelled for a silent washing
and the cycle ends with the Rinse Hold step.
After completion of the programme, run Spin
cycle to spin the laundry.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GWN 48430 CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GWN 48430 CW in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GWN 48430 CW

Grundig GWN 48430 CW User Manual - German - 50 pages

Grundig GWN 48430 CW User Manual - Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info