645170
24
Zoom out
Zoom in
Previous page
1/40
Next page
• Selbstreinigung (Self Clean)
Use regularly (once in every 1-2
months) to clean the drum and
provide the required hygiene. Apply
this procedure without any laundry in
the product. To obtain better results,
put powder limescale remover for
washing machines into the detergent
compartment “2”. When the
programme is over, leave the loading
door ajar so that the inside of the
machine gets dry.
C
This is a maintenance programme,
not a washing programme.
Do not run the programme when
there is something in the machine.
If you try to do so, the machine
detects that there is a load inside
and aborts the programme.
Special programmes
For specific applications, select any of
the following programmes.
• Spülen (Rinse)
Use when you want to rinse or starch
separately.
• Schleudern+Abpumpen (Spin + Drain)
Use this programme to discharge the
water in the machine.
Temperature selection
Whenever a new programme
is selected, the recommended
temperature for the selected
programme appears on the
temperature indicator.
To decrease the temperature, press
the Temperature Adjustment button.
Temperature will decrease gradually.
C
If the programme has not reached
the heating step yet, you can
change the temperature without
switching the machine to Pause
mode.
Selecting the spin speed
Whenever a new programme is
selected, the recommended spin
speed of the selected programme is
displayed on the Spin Speed indicator.
To decrease the spin speed, press
the Spin Speed Adjustment button.
Spin speed decreases gradually.
Then, depending on the model of the
product, “Rinse Hold” and “No Spin”
options appear on the display. See
Auxiliary function selection” section
for explanations of these options.
Rinse Hold
If you are not going to unload your
clothes immediately after the
programme completes, you can use
Rinse Hold function to keep your
laundry in the final rinsing water in
order to prevent them from getting
wrinkled when there is no water in
the machine. Press Start / Pause
button after this process if you want to
drain the water without spinning your
laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in
water, adjust the Spin Speed and press
Start / Pause button.
Program resumes. Water is drained,
laundry is spun and the programme is
completed.
C
If the programme has not reached
the spinning step yet, you can
change the speed without switching
the machine to Pause mode.
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GWN 36431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GWN 36431 in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GWN 36431

Grundig GWN 36431 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info