769843
33
Zoom out
Zoom in
Previous page
1/48
Next page
33 /EN Washer-Dryer / User Manual
5.17 Changing the selections
after programme has started
5.17.1 Adding laundry after the
programme has started :
İf the status of the machine is suitable for
adding laundry, the laundry adding symbol
on the display will turn on. When you press
Start/Pause button in such a case, door
lock will be disabled and the door will open
so that you can add laundry. When the door
lock is disabled, the door lock symbol on
the display will disappear. After adding the
laundry, close the door and press Start/
Pause again to continue the washing cycle.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
5.17.2 Switching the
machine to pause mode:
Press
Start/Pause
to switch the machine to
the pause mode while a programme is running.
Pause symbol will flash on the display.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
5.17.3 Changing the programme
selection after the programme has
started:
The programme change is not allowed when the
current programme is running. If Child Lock is
not enabled, you can select a new programme
after switching the current programme to pause
mode. This will cancel the current programme.
C
INFORMATION
The newly selected programme
will start anew.
5.17.4 Changing the auxiliary
function, spin speed and
temperature settings
Depending on the step the current programme
has reached, you can cancel or enable auxiliary
functions. See “Auxiliary function selection”.
Also, you can change the spin speed,
temperature and drying settings. See "Spin
speed selection" and "Temperature selection".
C
INFORMATION
If changes are not allowed, an
audible warning will be heard.
If the temperature of the water inside the
machine is high or if the water level is above
the door line, the loading door will not open.
5.18 Cancelling the programme
The programme will be cancelled when the
machine is turned off and on again. Press
and hold the
On/Off
button for 3 seconds.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
C
INFORMATION
If you press the On/Off button
while the child lock is enabled, the
programme will not be cancelled. You
should cancel the Child Lock first.
If you want to open the loading door after
you have cancelled the programme but
you cannot do it since the water level in
the machine is above the loading door
baseline, turn the Programme Selection
knob to Spin+Pump programme and
discharge the water in the machine.
5.19 End of programme
Once the programme is completed,
“End” will be displayed.
If you do not press any button for 10 minutes,
the product will turn off automatically.
Display and all indicators will turn off.
Completed programme steps will be
displayed if you press the On/Off button.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GWD38400C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GWD38400C in the language / languages: English as an attachment in your email.

The manual is 6.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info