769843
29
Zoom out
Zoom in
Previous page
1/48
Next page
29 /EN Washer-Dryer / User Manual
C
INFORMATION
If the selected wetness level (Iron Dry,
Wardrobe Dry, Wardrobe Extra Dry)
cannot be reached at the end of the
drying programme, your machine will
automatically extent the programme
duration. The programme will take longer.
If Timed Drying is selected, the programme
will end at the end of the drying time
even if the laundry is not dry.
If, during the drying programme, the
selected wetness level (Iron Dry, Wardrobe
Dry, Wardrobe Extra Dry) is reached
or extra dryness is detected in the
timed drying options, the programme
will take shorter. The time decrease
will be shown on the display.
5.11.1 Auxiliary Functions
• Express
When this function is selected, durations of
relevant programmes get shorter by 50%.
Thanks to the optimised washing steps,
high mechanic activity and optimum water
consumption, high washing performance is
achieved in spite of the reduced duration.
• Steam
Use this programme to reduce the
wrinkles and shorten the ironing times
for a small amount of cotton, synthetic
or mixed clothes that are not stained.
• Remote Control
You can use this auxiliary function button
to connect your product to smart devices.
For detailed information, see HomeWhiz
and the Remote Control Function.
• Custom Programme
This auxiliary function can be used for
Cottons and Synthetics programmes only
with the HomeWhiz application. When
this auxiliary function is enabled, you can
add up to 4 additional rinse steps to the
programme. You can select and use some
auxiliary functions even though they are not
found on your product. You can increase
and decrease the time of the Cottons and
Synthetics programmes within a safe range.
C
INFORMATION
When the Specialised Programme
auxiliary function is selected, washing
performance and energy consumption
will be different than the value indicated.
• Drying
This function dries your laundry after the washing
cycle. Please see the programme table for
programmes that can be used with this function.
5.11.2 Functions/Programmes
Selected by Pressing the
Function Buttons for 3 Seconds
• Drum Cleaning+
To select this programme, press and hold the
auxiliary function button 2 for 3 seconds. Use
regularly (once in every 1-2 months) to clean the
drum and provide the required hygiene. Before
the programme, it applies steam to soften
residues in the drum. Operate the programme
while the machine is completely empty. To obtain
better results, put powder lime-scale remover
for washing machines into the detergent
compartment no. “2”. This programme contains
a drying step that runs after the drum cleaning
step to dry the inside of the machine.
C
INFORMATION
This is not a washing programme.
It is a maintenance programme.
Do not run this programme when
there are any objects in the machine.
If you try to do so, the machine will
automatically detect that there is load
inside and abort the programme.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GWD38400C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GWD38400C in the language / languages: English as an attachment in your email.

The manual is 6.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info