Allgemeiner Teil / General Section GV 950…, GV 1010…, GV 1030…
8 GRUNDIG Service
Operating Hints This chapter contains excerpts from the user manual. For further particulars please refer to the appropriate user manual the part number of which is indicated in the
relevant spare parts lists.
CONNECTING AND PREPARATION
________
Connecting the aerial, television set, VCR-SAT module
and mains cable
Note:
If your television is equipped with Megalogic functions, the video recorder
and the television set must be connected with the supplied EURO-AV cable;
see step 3.
If you wish to connect a VCR-SAT module with an SAT control socket to the
video recorder, you must connect it before making the settings; start with step
2 from the example.
1 Insert the aerial cable of the house aerial in the aerial socket
»ANTENNA IN« of the video recorder.
2 Insert the supplied aerial cable in the socket »RF OUT« of the video recorder
and in the aerial socket of the television set.
3 Insert the supplied EURO-AV cable in the socket »LINE1(I) IN/OUT« of the
video recorder and in the AV 1 socket of the television set.
– This connection provides for better picture and sound quality during
playback.
– Stereo sound can only be played back on the stereo-television set via this
connection.
4 If a VCR-SAT module with an SAT control socket is connected to the video
recorder:
Connect the »LINE 2 (II) IN/DECODER« jack of the video recorder and the
VCR jack of the VCR-SAT module with a commercially available EURO-AV
cable (connection 4A).
.
1
3
4A4B
4C
52
6
CONNECTING AND PREPARATION
_______________________________________
Connect the »
ʐʐ
« jack of the video recorder and the »SAT-LINK« jack (control
line) of the VCR-SAT module with a commercially available cinch cable
(connection 4B).
Insert the aerial cable of the satellite aerial in the corresponding aerial socket
(INPUT-SAT) of the VCR-SAT module (connection 4C).
Note:
A PAY-TV decoder can also be connected to the jack »LINE 2 (II)
IN/DECODER«.
If a VCR-SAT module is installed in this jack, connect the PAY-TV decoder to
the »DEC« jack of the VCR-SAT module.
In this case, the decoder can only be used for television stations received
through the VCR-SAT module.
5 Insert the plug of the video recorder mains cable in the socket.
– The video recorder is now in stand-by mode.
6 Insert the mains cable of the VCR-SAT module in the jack »230V~ 50–60Hz«
of the VCR-SAT module.
Insert the mains cable plug in the socket.
– The VCR-SAT module is now in stand-by mode.
Caution:
The only way to isolate the video recorder and the VCR-SAT module from the
mains supply is to pull the plug.
Note:
If the video recorder is connected to a television set with a 16:9 format, ob-
serve the setting in the section, ”Operation with a format 16:9 television” on
page 45.
.
