27
Dubbing
r
Operation
In playback mode, locate the tape position at which
the dubbing should begin and then press the W
button on the remote control or the U button on
the recorder (playback-pause).
– Display on the recorder: »
STILL
«.
Press the
¢
INS/DUB button (activates the dubbing
function).
– Display on the recorder: »
CV DUB PAU
« or
»
HI DUB PAU
«
Ń
!
The volume is automatically adjusted.
The volume can also be adjusted manually. To do
this, press the
¢
MAN
button on the recorder. Then
use the
¢
-LEVEL+ buttons on the recorder to adjust
the volume until the red display (0 dB) lights up
during the loudest passages.
Begin dubbing using the T button on the remote
control or the Q button on the recorder.
– The original sound remains on the hifi track and
the new sound is recorded on the longitudinal
track.
Stop dubbing using the
¢
INS/DUB button.
– The video recorder switches to playback, and you
hear the sound from the mono (longitudinal)
track. The »
DUB
« display disappears.
Ń
!
When changing a dubbed cassette, you must
switch to the mono (longitudinal) track in order to
hear the dubbed sound. To do so, press the
¢
AUDIO
button on the remote control repeatedly
until »
MONO
« appears on the recorder.
Ń
!
If you wish to hear the original sound as well as the
dubbing, press the
¢
AUDIO
button on the remote
control repeatedly until »
MIX
« appears in the dis-
play on the recorder.
Ń
!
If the recorder is connected to an audio mixer, you
can mix the hifi original sound of the video cassette
with the sound from external sound sources.
4
3
2
1
A new audio track can be added to the recording at
a later date.
Ń
!
The original sound of the longitudinal track is era-
sed completely, and the hifi (helical) track is preser-
ved.
r
Connecting
Connect the hifi system to the
ň
AUDIO sockets at
the back of the recorder using commercially availa-
ble phono cable.
R = right channel; L = left channel.
Ń
!
The
Ň
AUDIO sockets are also suitable for connec-
ting to an audio mixer (input).
Connect the camcorder to the L AUDIO IN R
sockets on the front of the recorder using commer-
cially available phono cable.
Ń
!
These sockets are also suitable for connecting to an
audio mixer (output).
r
Preparation
Ń
!
If not indicated otherwise, execute the following
procedures using the buttons on the recorder.
Insert a recorded cassette into the recorder.
Select a programme source using the dc
buttons.
HI
= sound source on the AUDIO sockets at the
back of the recorder, or
CV
= sound source on the AUDIO sockets on the
front of the recorder.
2
1
2
1
