Manual Grundig gv 540 (page 19 of 38) (English)

135644

Zoom out

Zoom in

1/38

TIMER Recording

The options for TIMER

programming

The recorder can be programmed to record at a

later date.

You can programme:

– Six broadcasts over a period of 31 days,

– Daily or weekly broadcasts with the same starting

time,

– With or without VPS/PDC control.

– with standard or long playing time.

You can choose from two variants:

1. With the ShowView system.

2. With the user guide and manual data entry.

VPS/PDC – the Video Programme System

VPS/PDC control when programming recording

guarantees that your desired broadcasts are always

recorded completely.

Incorrect recording resulting from programme alte-

rations no longer occurs.

Notes on TIMER programming with

VPS/PDC

Many TV stations broadcast an additional program-

me-related signal (VPS/PDC signal) which indicates

the start and duration of each individual TV pro-

gramme.

It is therefore important when programming the

recorder to enter the switch-on and switch-off

times to the exact minute.

If TV programmes are altered or moved, special

VPS/PDC times are indicated in the programme

over-views. They must be entered instead of the

normal starting times.

The recorder recognizes these alterations and is

switched on at the actual start of the programme

and switched off at the actual end of the

programme.

Programming a number of TV

programmes on one day

If you wish to record a number of TV programmes

on one day, you must decide which one is to be

recorded completely if there is a risk of alterations

to timing.

Example:

You wish to record the 1st station from 20:15 to

21:45 Uhr and the 2nd station from 21:50 to 22:30.

But the programme from the 1st station is extended

by 15 minutes. The recorder records this program-

me until 22:00, controlled by the VPS/PDC signal.

Only then does it switch to the second station. So

10 minutes of the second programme are missing.

If the programme from the 2nd station is to be

recorded from the beginning you must delete

VPS/PDC control when programming the 1st stati-

on. The length of the recording is then controlled by

the switch-on and switch-off times.

Recording of the 1st station then ends at 21:45.

And recording of the 2nd station starts at 21:50.

Programming all evening programmes

on one day

You wish to record all the evening programmes on

ARD (for example Saturday starting at 20:15, enter-

tainment programme, winning Lotto numbers,

film). In this case you must use a separate TIMER

position for each of these programmes. Otherwise

the recorder would stop recording at the end of the

first programme – controlled by the VPS/PDC-Sig-

nal.

If you only wish to use one TIMER position for all

evening programmes (for example from 20:15 to

00:15) you must delete VPS/PDC control when pro-

gramming.

How to confirm and delete the VPS/PDC signal is

explained in the programming examples.

When recording TV stations which do not broad-

cast a VPS/PDC signal, the recording is started by

the set switch-on time only and stopped by the set

switch-off time only.

If you use an aerial positioner and pre-programme

satellite programmes from different satellites, you

should programme the VPS/PDC control for only

one programme.

Reason:

If two satellite programmes from different satellites

are pre-programmed with VPS/PDC control, the

satellite aerial constantly moves back and forth bet-

ween the satellite positions. This can lead to an

overload of the aerial motor.

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grundig gv 540 in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig gv 540

Grundig gv 540 User Manual - German - 41 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grundig gv 540 Manual

Product: