135634

Grundig gv 500 Manual

18
Zoom out
Zoom in
Previous page
1/31
Next page
17
TIMER Recording
The options for TIMER
programming
The recorder can be programmed to record at a
later date.
❒
You can programme:
– Six broadcasts over a period of 31 days,
– Daily or weekly broadcasts with the same starting
time,
– With or without VPS control.
❒
You can choose from two variants:
1. With the ShowView system.
2. With the user guide and manual data entry.
❒
VPS – the Video Programme System
VPS control when programming recording guaran-
tees that your desired broadcasts are always recor-
ded completely.
Incorrect recording resulting from programme alte-
rations no longer occurs.
❒
Notes on TIMER programming with VPS
Many TV stations broadcast an additional program-
me-related signal (VPS signal) which indicates the
start and duration of each individual TV program-
me.
It is therefore important when programming the
recorder to enter the switch-on and switch-off
times to the exact minute.
If TV programmes are altered or moved, special
VPS times are indicated in the programme over-
views. They must be entered instead of the normal
starting times.
The recorder recognizes these alterations and is
switched on at the actual start of the programme
and switched off at the actual end of the program-
me.
❒
Programming a number of TV
programmes on one day
If you wish to record a number of TV programmes
on one day, you must decide which one is to be
recorded completely if there is a risk of alterations
to timing.
Example:
You wish to record the 1st station from 20:15 to
21:45 Uhr and the 2nd station from 21:50 to 22:30.
But the programme from the 1st station is extended
by 15 minutes. The recorder records this program-
me until 22:00, controlled by the VPS signal. Only
then does it switch to the second station. So 10
minutes of the second programme are missing.
If the programme from the 2nd station is to be
recorded from the beginning you must delete VPS
control when programming the 1st station. The
length of the recording is then controlled by the
switch-on and switch-off times.
Recording of the 1st station then ends at 21:45.
And recording of the 2nd station starts at 21:50.
❒
Programming all evening programmes
on one day
You wish to record all the evening programmes on
ARD (for example Saturday starting at 20:15, enter-
tainment programme, winning Lotto numbers,
film). In this case you must use a separate TIMER
position for each of these programmes. Otherwise
the recorder would stop recording at the end of the
first programme – controlled by the VPS-Signal.
If you only wish to use one TIMER position for all
evening programmes (for example from 20:15 to
00:15) you must delete VPS control when program-
ming.
How to confirm and delete the VPS signal is explai-
ned in the programming examples.
w
!
When recording TV stations which do not broad-
cast a VPS signal, the recording is started by the set
switch-on time only and stopped by the set switch-
off time only.
➡
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig gv 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig gv 500 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig gv 500

Grundig gv 500 User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info