574814
23
Zoom out
Zoom in
Previous page
1/36
Next page
23 / 36 EN
Dryer / User Manual
6 Easy use
6.1 Preparing the machine
1. Plug in the machine.
2. Place the laundry in the machine.
3. Press the On/off/cancel button for 1
second (long).
4. When your machine is operated for
the first time, it starts with the default
programme (wardrobe dryness for
cottons).
6.2 Programme selection
1. Decide the appropriate programme from
the table below which includes drying
levels.
2. Select the desired programme with the
Programme Selection knob.
6.3 Auxiliary functions
Audio Warning
The machine will give an audio warning
when the programme comes to an end. Use
the Audio Warning Level button to adjust
the sound level.
Anti-creasing
A 2-hour anti creasing programme to prevent
laundry from creasing will be activated
if you do not take the laundry out after
the programme has come to an end. This
programme rotates the laundry in 10-minute
intervals to prevent creasing.
Cancelling End Time function
If you want to cancel the End Time countdown
and start the programme immediately:
1. Press On/Off/Cancel button for 3
seconds to cancel the programme.
2. Press On/Off/Cancel button to start the
programme you have previously selected.
6.4 Starting the programme
Press Start/Pause button to start the
programme.
Start symbol will light up to indicate that
the programme has started and “:” symbol
in the middle of the remaining time will keep
flashing.
6.5 End of programme
Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-up
indicator when the programme comes to an
end. The loading door can be opened and
the machine becomes ready for a second
cycle.
Press On/Off/Cancel button to switch off
the machine.
6.6 Child Lock
Machine is equipped with a Child Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On/Off/Cancel button
on the control panel are deactivated when the
Child Lock is active.
In order to activate the Child Lock, press
Audio Warning, Child Lock button for 3
seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child Lock should be
deactivated. Press the same button for 3
seconds again to deactivate the Child
Lock.
C
Lock symbol will appear on the
display when the Child Lock is
activated.
C
Child Lock is deactivated when the
machine is switched off and on with
On/Off/Cancel button.
When the Child Lock is activated:
Display symbols will not change even if
the position of Programme Selection knob
is changed while the machine is running
or in halt.
If the Child Lock is deactivated after
changing the position of the Programme
Selection knob while the machine is
running, the machine stops and new
programme information is displayed.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GTN38240GC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GTN38240GC in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info