544915
56
Zoom out
Zoom in
Previous page
1/68
Next page
56 / 68 EN
Dryer / User Manuel
Operating the product
Return to factory settings menu is used
to return the processes you have performed
back to the factory settings. Press spin
speed adjustment button in this menu.
Save Settings warning is displayed; when
the spin store adjustment button is
pressed again, factory settings are restored
and the display exits the menu to return to the
programme selection display.
The setting is saved by pressing and holding
for 3 seconds the menu access button and
then it exits the menu. User can operate the
machine by selecting the required programme.
5.9 Warning symbols
C
Warning symbols may differ
according to the model of your
machine.
Lint filter cleaning
When the programme is completed, a
warning symbol will appear to remind that the
filter needs to be cleaned.
C
If the Filter Cleaning symbol
is on continuously, refer to
“Troubleshooting” section.
Water tank
When the programme is completed, a
warning symbol will appear to remind that the
water tank needs to be drained.
If the water tank becomes full while the
programme is running, the warning symbol
will start to flash and machine will pause.
Drain the water in the water tank and
press Start / Pause button to resume the
programme. The warning symbol turns off and
the programme resumes operating.
Cleaning the filter drawer
Warning symbol flashes with certain intervals
to remind that the filter drawer needs to be
cleaned.
Loading door open
Following warnings light alternately when the
loading door of the dryer is open.
Door is open
Program Paused
End Time Setting
End Time Setting function allows you to
delay the ending time of the programme up to
24 hours.
1. Open the loading door and put the
laundry in.
2. Select the drying programme, spin speed
and, if required, the auxiliary functions.
3. Press End Time Setting selection button
to set the desired End Time. End Time
Setting symbol lights up on the display.
(When the button is pressed and hold,
End Time proceeds uninterruptedly).
4. Press Start/Pause button. End Time
Setting starts to count down and End
Time enabled and Programme Started
labels appear on the display.The “:” in
the middle of the displayed End Time
Setting will start to flash.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GTN 48261 GC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GTN 48261 GC in the language / languages: English, German as an attachment in your email.

The manual is 6,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GTN 48261 GC

Grundig GTN 48261 GC User Manual - Dutch, French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info