769963
71
Zoom out
Zoom in
Previous page
1/76
Next page
FL
71
EN
8. Troubleshooting
Drying process takes too much time.
Pores of the lint filter are clogged. >>> Wash the lint filter with warm
water.
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the
filter drawer.
Ventilation grids on the front side of the machine are blocked. >>> Remove
the objects (if any) that block ventilation in front of the ventilation grids.
Ventilation is not sufficient since the room where the machine is installed
is very small. >>> Open the door and window of the room to avoid the
room temperature increase too much.
Lime deposit has built up on the dampness sensor. >>> Clean the
dampness sensor.
Excessive laundry is loaded. >>> Do not load the dryer in excess.
Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed
in your washing machine.
Laundry comes out wet at the end of drying.
CAfter drying, the hot clothes feel damper than their actual
dampness level.
It is likely that the selected programme did not suit the laundry
type.>>>Checking the care labels on clothes, select appropriate
programme for the laundry type or use timer programmes in addition.
Pores of the lint filter are clogged. >>> Wash the lint filter with warm
water.
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the
filter drawer.
Excessive laundry is loaded. >>> Do not load the dryer in excess.
Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed
in your washing machine.
Dryer does not switch on or the programme does not start. Dryer does not
start when it is set.
It is not plugged in. >>> Make sure that the machine is plugged in.
The loading door is ajar. >>> Make sure that the loading door is closed
securely.
Programme is not selected or the Start / Pause / Cancel button is not
pressed. >>> Make sure that the programme is selected and the machine
is not in Pause mode.
Childproof Lock is activated. >>> Deactivate the Childproof Lock.
Programme is interrupted without any cause.
Loading door is ajar. >>> Make sure that the loading door is closed
securely.
There was a power failure. >>> Press Start / Pause / Cancel button to start
the programme.
Water tank is full. >>> Drain the water tank.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GTN 48250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GTN 48250 in the language / languages: English, Dutch as an attachment in your email.

The manual is 5.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GTN 48250

Grundig GTN 48250 User Manual - German, French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info