544914
54
Zoom out
Zoom in
Previous page
1/64
Next page
54 / 64 EN
Dryer / User Manual
Operating the product
Adding / removing laundry in Pause
mode
In order to add or take out laundry after the
drying programme has started:
1. Press Start/Pause button to switch the
machine to Pause mode. Drying process
will stop.
2. While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
3. Press the Start/Pause button to start the
program.
C
Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes
and the result will be wet laundry after
the drying process is over.
C
You may repeat laundry adding
or removing process as many
times as you desire during drying.
However, this process will increase
the programme time and energy
consumption since the drying process
will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme
has started.
C
If you select a new programme by
turning the Programme Selection knob
while your machine is in Pause mode,
then the current program is aborted
and new programme information is
displayed.
CAUTION: Do not touch the inner
surface of the drum when adding or
taking out laundry while a programme
is running. Surfaces of the drum are
hot.
5.12 Canceling the programme
If you want to stop drying and cancel the
programme for any reason after the machine
has started to run, press and hold the On/
Off/Cancel button for 3 seconds.
A
CAUTION: As the inside of the
machine will be excessively hot
when you cancel the program while
the machine is running, activate the
ventilation program to cool it down.
5.13 End of programme
Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-up
indicator when the programme comes to an
end. The loading door can be opened and
the machine becomes ready for a second
cycle.
Press On/Off/Cancel button to switch off
the machine.
C
2-hour Anti-creasing program will be
activated if the laundry is not taken
out after the program has come to an
end.
C
Clean the lint filter after each drying.
(See "Lint Filter and Loading Door
Inner Surface")
C
Drain the water tank after each drying
cycle. (See "Draining the water tank")
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GTN 38250 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GTN 38250 G in the language / languages: English, German as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GTN 38250 G

Grundig GTN 38250 G User Manual - Portuguese, Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info