773738
15
Zoom out
Zoom in
Previous page
1/32
Next page
15
Reversing The Doors
We recommend that you reverse
the door before switching on for
the first time.
Tools required: Small and medium
size flat and cross-headed
screwdrivers, a pair of pliers.
Spare Parts supplied in the plastic
bag: The following parts, which are
exclusively for left hand side fitted
hinge operation are supplied in a
plastic bag with the appliance:
- Door top trim hinge covers –
there are 2 different parts, one for
each side of top trim.
We suggest you keep all the parts
supplied in the plastic bag and also
parts, which have been removed
when reversing the door, in a safe
place for possible future, re-use.
Important:
We suggest you ask somebody
to help you when moving the
appliance around and to hold the
door when removing / re-fitting
hinges and the door to avoid any
injury and damage to the product.
Please refer to diagrams supplied.
To follow numbers in brackets
below, refer to the main diagram.
1. Switch off the appliance at
the socket outlet and pull
out the mains plug.
2. Remove all loose items and
fittings and food inside the
appliance.
3. Gently prise off plastic
hinge covers on both
sides of front top panel
using a small flat-headed
screwdriver. (1-2)
4. Unscrew the bolts of the
top hinge and remove top
hinge. (3)
5. Remove door carefully
off the bottom hinge and
stand door upright in a safe
place.(4)
6. Gently prise off plastic
hinge cover on door top
trim. Fit the other door top
trim plastic off hinge cover
supplied in the plastic bag.
(5)
7. Gently tilt the appliance
back against a strong wall
on its rear side sufficiently
to allow the lower hinge to
be removed. Take care to
protect the appliance, your
wall and floor coverings.
You can utilise the original
packaging to do this.Once
you tilt the appliance back,
check to make sure the
appliance is completely
stable and safe before you
carry on. (6)
8. Unscrew and remove the
front feet and 1 bolt. (7)
9. Unscrew and remove the
bottom hinge. (8)
10. Unscrew and remove the
bottom hinge door stopper
and bushing and reposition
them on the other side
while rotating the bushing
180°. (9)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GSL3671N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GSL3671N in the language / languages: English as an attachment in your email.

The manual is 0.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info