570184
8
Zoom out
Zoom in
Previous page
1/12
Next page
ENGLISH
8
Made for iPod/iPhone
“Made for iPod/iPhone” means that an elec-
tronic accessory has been designed to connect
specifically to an iPod/iPhone, and has been
certified by the developer to meet Apple perfor-
mance standards. Apple is not responsible for
the operation of this device or its compliance
with safety and regulatory standards.
iPhone, iPod, iPod classic, iPod nano, iPod shuf-
fle, and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Notes:
7
The device is able to recharge the internal
battery of your iPod/iPhone. In standby
mode, the device cannot recharge iPod/
iPhone because of minimised power con-
sumption. If you need to recharge your iPod/
iPhone, please power up the device.
7
Your iPod/iPhone will use its backlight set-
tings as configured. If these need changing,
use the settings menu on your iPod/iPhone.
7
Using the buttons of the remote control and
the menus of the iPod/iPhone, you can select
the existing structures (Playlists, Artists, Al-
bums, etc.) and tracks.
Supported iPod/iPhone models
The software is made to support the following
iPod/iPhone models:
– iPhone 5
– iPod touch (5th Generation)
– iPod nano (7th Generation)
– iPad (4th Generation)
– iPad mini
IPOD/IPHONE MODE
___________________________________________
Playing the contents of an
iPod/iPhone
1 Switch on the device from stand-by mode by
pressing »
8
« on the remote control or press
briefly »
8
M« on the device.
2 Select the input source with »
M
«.
Playback starts automatically with the last
played passage.
3 Adjust the volume with »
« or »
+
«.
4 Mute the volume using » « on the remote con-
trol.
Deactivate mute, press » « on the remote con-
trol again.
5 To pause playback, press »e
II
«.
Continue playback by pressing »e
II
« again.
Repeating the current track
1 During playback, press briefly »
<
«.
Selecting another track
1 During playback, press »
<
« or »
>
« repeatedly
until the track is reached.
Playback of the selected track or file starts
automatically.
Searching for a passage within a
track
1 During playback, press and hold »
<
« or »
>
« to
move through the current file.
2 Release »
<
« or »
>
« when the passage has
been found.
Automatic shutdown
The device will automatically switches to Stand-
by mode if no audio signal from iPod/iPhone is
played for 15 minutes. For further using switch
on the device again.
Switch of
1 Press »
8
« on the remote control or press and
hold the »
8
M« button on the device for 2
seconds to turn off the unit.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GSD 320 BLUEBEAT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GSD 320 BLUEBEAT in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GSD 320 BLUEBEAT

Grundig GSD 320 BLUEBEAT User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info