613429
31
Zoom out
Zoom in
Previous page
1/97
Next page
xDSL:
First, change the Ethernet Port under Network settings to xDSL and then move to the xDSL menu. After this, just
put in the ID and Password for your PPPoE connection. This data will be provided by your DSL provider.
DDNS:
The settings for the GRUNDIG DDNS server are already filled in. You will only need to set the time interval with
which the recorder should resend its IP information to the DDNS server. If your firewall and router settings are
correct, you should be able to access the DVR now from anywhere in the world by using the following address:
[last 6 digits of MAC address].grundig-ddns.eu
e.g. e312d45.grundig-ddns.eu
eSATA Device Connection:
You can connect almost any eSATA device to the DVR. The DVR does not supply power to the eSATA port;
therefore only devices with their own external power supply can be used.
NOTE:
The DVR will detect an eSATA connection, even though the DVR is already powered on. If not, it is recommended
to connect an eSATA device as follows:
1. Power off the DVR.
2. Connect the external device to the eSATA interface.
3. Power on the external device.
4. Power on the DVR.
GDS-R04A connection:
Connect the GDS-R04A with a Cat-6 cable to the [storage] port of the DVR. For the detailed configuration of the
GDS-R04A please refer to its user manual.
29
English
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GRH-K1004A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GRH-K1004A in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info