613429
12
Zoom out
Zoom in
Previous page
1/97
Next page
- When supplying the DVR with power, the DVR starts booting automatically.
- In order to cut off the power, press the power switch on the DVR front for 5 seconds. When a pop-up window
appears, select “YES” to shut down the DVR.
- For supplying the DVR with power again, push the Power button.
4.3. Running the OSD menu
The OSD can be controlled with the keypad on the front panel of the DVR, with a remote control or with an USB
mouse. In this manual we will refer to the keys of the front panel, as the procedure with a remote control and a
mouse is almost identical.
4.3.1. OSD Menu Configuration
Press [MENU] on the keypad on the front to open the configuration menu as shown below:
(1) Main Menu : The selected tab is shown in bright colour and the related sub-menu will be shown on the left,
below the tab. To move to the previous/next tab, use the [
/
] arrow buttons. To move to a sub-menu, press the
[Enter] key.
(2) Submenu : The selected sub-menu is shown as a tab title and the related setting will be shown. To move to the
previous/next tab, use the [
/,/] arrow buttons. To move to the related setting, press [Enter]. To move to an
upper main menu, press the [ESC] button.
(3) Setting page : The selected tab is shown in blue. To move to the previous/next tab, use the [
/] or [/]
arrow button and press the [Enter] key for value setting. When setting the value is a word, a dialogue box to edit
the word will open. When setting the value is a number, it should be set with using [
/
] or [/]. Press the
[ESC] button when the value is set. With the [ESC] button it is also possible to move to the upper sub-menu.
10
English
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GRH-K1004A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GRH-K1004A in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info