574816
14
Zoom out
Zoom in
Previous page
1/44
Next page
14
DISHWASHER / USER'S MANUAL
/44 EN
Preparation
Water hardness & regeneration settings
The dishwasher requires lime free water. Hard water leaves watermarks on your dishes. Your
dishwasher has a special water softening system to remove the hardness of the tap water.
Setting this system correctly will increase the washing effectiveness.
To find out the water hardness level of water in your area, contact your local Water Board or
determine water hardness level by the help of test strip provided.
If you move to a different location, the level of water hardness will possibly be different.
It is essential to reset the water hardness in order to obtain optimum washing efficiency.
Test Strip
Let the water
flow from your
tap for 1 minute.
Remove the
test strip from
its packing.
Fill a glass with
tap water and
dip the test strip
into water for 1
second.
Take the test strip
out of the water and
shake it.
Hold for
1 minute.
Set the water hardness level of your dishwasher
according to the result shown by the test strip.
b
a
e
1 minute
1 second
c
d f
No Lime
Very low lime content
Low lime content
Medium lime content
High lime content
Very High lime content
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF*
Water Hardness Level Indicator
1
st
Level
0-5 0-4 0-8
Press the Programme Selection button to set the
water hardness level to P1 position.
2
nd
Level
6-9 5-7 9-13
3
rd
Level
10-15 8-12 14-22
Press the Programme Selection button to set the
water hardness level to P2 position.
4
th
Level
16-19 13-15 23-27
Press the Programme Selection button to set the
water hardness level to P3 position.
5
th
Level
20-24 16-19 28-34
Press the Programme Selection button to set the
water hardness level to P4 position.
6
th
Level
25-62 20-50 35-90
Press the Programme Selection button to set the
water hardness level to P5 position.
- Turn on the machine by pressing On / Off key while pressing and holding the Programme
Selection key when the machine is in off position. Press and hold the programme key
until the water hardness level stored on your machine is displayed in the programme
indicator. Start / Pause indicator will start flashing once the stored water hardness setting
is displayed.
- By using Programme Selection key, adjust water hardness level according to the hardness
of the supply water. See “Water hardness level adjustment table” for correct setting.
- Select the water hardness level suitable to your machine from the Water Hardness Level
Adjustment Table by pressing the Delayed Start Key.
Water Hardness Level Adjustment Table
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GNF41810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GNF41810 in the language / languages: English as an attachment in your email.

The manual is 8,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info