673633
10
Zoom out
Zoom in
Previous page
1/12
Next page
ENGLISH
22
OPERATION ________________________________
Preparation
1 Remove all packaging material and stickers.
Dispose of them according to the applicable
statutory regulations.
2 Before using the appliance for the first time,
carefully clean all parts that come into contact
with milk. (See the “Cleaning and care” section.)
3 Unroll the power cord
H
from the power cord
storage area
I
. Pass the power cord through
the slot on the base.
Operation
1 Place the milk jug
C
on a clean, flat surface.
a. Assemble the milk frother as shown below.
b. Attach the frothing whisk
B
for frothing milk.
Hold the whisk by the black handle and lower
it into position. Then press the top of the whisk
to secure it into place. Do not hold the frothing
whisk by the springs.
OR
c. Attach the mixing paddle
F
for heating milk.
a
b
c
d
2 Pour the milk into the milk jug
C
. Make sure
you do not fill it above the maximum capacity
(as detailed in the table below) or below the
minimum mark. Look inside the milk jug to make
sure you do not go above the MAX mark
d
for
frothing or heating milk, otherwise the milk may
spill out of the milk jug.
3 Put the lid
A
on and push down to secure it
into place.
4 Place the milk jug
C
onto the base
E
making
sure the base is placed on a heat-resistant, even,
stable, dry, non-slip surface.
5 Insert the plug
H
into an earthed wall socket.
The On/Off button
D
will light up blue.
6 Select the function you want from the table below
and press the On/Off button
D
the correct
number of times for your desired function.
Function
On/Off button
D
Max. milk level
Heat & froth Press once – flashes red 300ml
Heat only
Press twice rapidly –
steady red
700ml
Froth only
Press three times rapidly –
flashes blue
300ml
Note
The appliance will switch off automatically once the
frothing / heating process is complete.
7 Press the On/Off button
D
at any time to stop the
process. The light will become blue (steady).
8 When the appliance stops, open the lid
A
. Use
a spoon to scoop out the froth before you pour
the milk.
9 Pull the plug
H
from the earthed wall socket.
Tips
To make measuring easy, there are max/min markers
on the milk jug.
When frothing milk, use cold semi-skimmed or UHT
milk for best results. Full milk does not froth well
because it has a higher fat content.
The appliance heats milk to the perfect temperature
for coffee ensuring the flavour is not impaired and
it quickly reaches drinking temperature so you can
start sipping away sooner.
If you want slightly warmer milk, leave the milk in
the jug for a further 30 seconds after it has finished
heating or frothing.
After frothing or heating wait two minutes for the
thermostat to reset before using the appliance again.
The appliance is designed to heat and froth milk. If
you add coffee granules, hot chocolate powder or
other flavourings make sure you thoroughly clean
the milk jug immediately after use.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GMN3490 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GMN3490 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GMN3490

Grundig GMN3490 User Manual - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info