574854
7
Zoom out
Zoom in
Previous page
1/18
Next page
05
4) Before mounting the unit to the sliding rails, ensure that the
bars with the sliding ball bearings are positioned at the front of the
rail as shown in the image below. Failure to do this may result in
damage to the sliding rails.
ATTENTION
Install the base so that the guide rails are perfectly vertical
5) Mounting the machine to the base.
The machine has to fit correctly to the sliding rails otherwise
damage may occur to the sliding rails and force out the ball
bearings.
? Due to the weight of the machine it is recommended that this
operation is carried out by two people.
? Position the unit to the sliding rails and slide back inside the
kitchen cabinet housing. If any restriction is felt or it moves more
easily on one side pull the machine out and ensure the sliding rails
fit correctly.
? Once fitted correctly to the rails the machine will slide back
smoothly and a "click" will be heard as the machine locks correctly
to the sliding rails.
? Leave sufficient space to access and insert the power cord.
? Turn the power switch on the side of the unit to the ON position.
? Push the machine all the way back on its sliding rails to locate it
fully within the cabinet housing.
6) If you have to pull out the machine, lift the drawer and pull out.
? If you have to remove the machine from the base unhook it from
the lateral guides using the levers, raising the lever of the right-
hand guide and lowering the lever of the left-hand guide (2).
2
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GKI 1110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GKI 1110 in the language / languages: English as an attachment in your email.

The manual is 14,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info