574850
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
Wall drilling and bracket fixing
7
Draw a vertical line on the supporting wall
up to the ceiling, or as high as practical, at
the center of the area in which the hood will
be installed.
7
Draw a horizontal line at 1040 mm above
the hob.
7
Place bracket (7.2.1) on the wall as shown
about 1-2 mm from the ceiling or upper limit
aligning the center (notch) with the vertical
reference line.
7
Mark the wall at the centers of the holes in
the bracket.
7
Place bracket (7.2.1) on the wall as shown
at X mm below the first bracket (X = height
of the upper chimney section supplied),
aligning the center (notch) with the vertical
line.
7
Mark the wall at the centers of the holes in
the bracket.
7
Mark a reference point at 116 mm from the
vertical reference as indicated.
7
Repeat this operation on the other side.
7
Drill 8 mm holes at all the center points
marked.
7
Insert plugs (11) into the holes.
7
Fix the lower bracket (7.2.1) using 12a
screws (4.2 x 44.4) supplied.
7
Fix the upper bracket (7.2.1) and the air
outlet connection support (7.3), together
using the 2 12a (4.2 x 44.4) screws sup-
plied.
7
Insert the two 12a (4.2 x 44.4) screws sup-
plied in the hood body fixing holes, leaving
a gap of 5-6 mm between the wall and the
head of the screw.
Mounting the hood body
7
Before mounting the hood body, tighten the
two screws (Vr) located on the hood body
mounting points
7
Hook the hood body onto the screws (12a)
7
Fully tighten the support screws (12a).
7
Adjust the screws (Vr) to level the hood
body.
Connections
INSTALLATION _____________________________________
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GDK5782 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GDK5782 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info