613426
6
Zoom out
Zoom in
Previous page
1/78
Next page
4.4. Installation and Connection
To make sure that the camera is waterproof, please follow the following installation procedure:
Step 1: Please refer to 4.3. Ethernet Installation to connect the cable.
Step 2: Put the Rubber Washers into the holes that are located on both sides of the Bottom Plate of the Camera.
Step 3: Aim the installation holes at the target installation position and fasten the screws to attach the Camera to
the ceiling.
NOTE: The supplied self-tapping screws are mainly for softer substrate/material installation, such as wood. For
other installation environments such as a cement wall, it is required to pre-drill and to put the plastic anchors
into the holes before fastening the supplied self-tapping screw to the wall.
Step 4: Please refer to 4.1. Camera Overview to adjust the lens.
Step 5: Aim the arch parts on both Dome Cover and Bottom Plate to attach the two parts firmly together. And
then fasten the security screws on the Dome Cover to finish the installation of the Camera.
5. Accessing the Camera
For initial access to the IP Camera, users can search the camera through the installer program: GRUNDIG
Finder.exe, which can be found on the supplied CD.
GRUNDIG Finder Software Setup :
Step 1: Double-click on the program GRUNDIG Finder.exe (see the desktop icon below). Its window will appear as
shown below. Then click on the “Find Device” button.
4
English
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GCI-K1812W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GCI-K1812W in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info