613410
79
Zoom out
Zoom in
Previous page
1/95
Next page
12.2. Sequence
The Sequence function supports in total eight Sequences; each Sequence consists of up to 64 Preset Points.
Please refer to the instructions below to program a Sequence.
NOTE: Before setting this function, users must pre-define at least two Preset Points.
Sequence Setting:
- Sequence No.:
Please select a number for the Sequence to be set from the drop-down list.
- Sequential Preset Points Setting:
Please set up each Preset Point of the programmed Sequence in order, assigning a Preset Point from the “Name”
list to the specified number of Preset Point and entering the Dwell Time (0~255 sec.) into the corresponding field.
- Sequential Reset:
To reset the sequence setting of each line, please press the “Reset” button in the top right corner of the setup
page. Then press the <
> button on the left to refresh the page in order to enter the new settings.
When finishing the sequential Preset Points setting, please click on the button “Save” in the top right corner of
the Sequence setting menu.
Sequence Run:
Select the specified Sequence No. from the drop-down list and press the arrow/point button. Then the camera
will start moving forward by each scene sequentially as programmed.
To view the camera executing a Sequence in full screen mode, please move the mouse cursor onto the live view
pane, right-click and left-click to select “fullscreen”. Then users can view the camera navigation in full screen.
To stop running the Sequence Line, simply move the cursor to the live view pane, right-click, hold the click and
drag the camera in any direction.
77
English
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GCI-K1603B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GCI-K1603B in the language / languages: English as an attachment in your email.

The manual is 6,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info