613424
45
Zoom out
Zoom in
Previous page
1/78
Next page
9.10. Tampering
The Tampering Alarm function helps the IP Camera against tampering such as deliberate redirection, blocking,
spray paint, and lens covering, etc. through video analysis and reaction to such events by sending out notifications
or uploading snapshots to the specified destination(s).
Detection of camera tampering is achieved by measuring the differences between the older frames of video
(which are stored in buffers) and more recent frames.
Tampering Alarm :
You will be able to turn on/off the Tampering Alarm function in the Tampering Alarm setting page. The default
setting is Off.
Tampering Duration :
The Minimum Tampering Duration is the time for video analysis to determine whether any camera tampering has
occurred. Minimum Duration can also be interpreted as defining the Tampering threshold; longer duration
represents a higher threshold. Settable Tampering Duration time range is from 10 to 3600 seconds.
Triggered Action (Multi-option) :
The Administrator can specify alarm actions that will take place when tampering is detected. All options are
listed as follows:
- Enable Alarm Output:
Check this item and select the predefined type of alarm output to enable alarm relay output when tampering is
detected.
- Record stream to SD Card:
Select this item, and the Tampering Alarm recording will be stored on a Micro SD/SDHC card when tampering is
detected.
NOTE: Please make sure the local recording (with Micro SD/ SDHC card) is activated so that this function can be
implemented. See section 7.3.12 Recording for further details.
- Send Alarm Message by FTP/E-Mail:
The Administrator can select whether to send an alarm message by FTP and/or E-Mail when tampering is
detected.
43
English
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GCI-H0602B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GCI-H0602B in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info