613424
5
Zoom out
Zoom in
Previous page
1/78
Next page
4. Installation
Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high
humidity. Doing so may cause fire or electric shock. Keep out of direct sunlight and heat radiation sources. It may
cause fire. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage
the CCD image sensor.
Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock. Install it in a
place with good ventilation.
When installing the camera, fasten it securely and firmly. A falling camera may cause personal injury.
If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
4.1. Camera Overview
1. LINE OUT & LINE IN / MIC IN: Two-way audio transmission
2. Power LED: Green light indicates good power connection.
3. Reset button: Press and hold the button for 5 seconds, and then the camera will reset to factory defaults.
After around 30 seconds, reconnect the camera by entering its default IP address: 192.168.1.1, in the URL bar.
4. AUTO IRIS connector: Auto iris lens connector
5. NETWORK (with PoE) Connector: RJ45 connector for LAN connection
6. Network LEDs: Green Link Light indicates good network connection. Orange Activity Light flashes for network
activity indication.
7. I/O Terminal Connector: For alarm connection
8. VIDEO (BNC connector): For video output
9. Micro SD Card slot: For video and snapshots storage
10. For GCI-H0602B: 12V connector / For GCI-K0503B and GCI-H0503B: AC 24V/DC 12V Connector (Please refer
to the table below for wiring of the AC 24V and DC 12V camera with the supplied power cable).
4.2. System Requirements
To perform the IP Camera via web browser, please ensure your PC is in good network connection, and meets the
system requirements as described below.
Personal Computer :
1.) Intel Pentium M, 2.16 GHz or Intel Core 2 Duo, 2.0 GHz
2.) 2 GB RAM or more
Operating System :
Windows VISTA or Windows XP
3
English
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GCI-H0602B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GCI-H0602B in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info