613434
24
Zoom out
Zoom in
Previous page
1/73
Next page
- Secondary DNS:
Secondary DNS is a secondary domain name server that backups the primary DNS.
Use PPPoE :
For the PPPoE users, enter the PPPoE Username and Password into the fields, and click on the “Save” button to
complete the setting.
Advanced :
- Web Server port:
The default web server port is 80. Once the port is changed, the users must be informed about the change for the
connection to be successful. For instance, when the Administrator changes the HTTP port of the IP Camera
whose IP address is 192.168.0.100 from 80 to 8080, the users must type in the web browser
“http://192.168.0.100:8080” instead of "http://192.168.0.100".
- RTSP port:
The default setting of RTSP Port is 554; the setting range is from 1024 to 65535.
- MJPEG over HTTP port:
The default setting of MJPEG over HTTP Port is 8008; the setting range is from 1024 to 65535.
NOTE: Be aware to choose a different port from the one set for the web server port.
UPnP Setting :
- Enable UPnP:
When the UPnP is enabled, whenever the IP Camera is presented to the LAN, the icon of the connected IP
Cameras will appear in My Network Places to allow for direct access as shown below.
NOTE: To enable this function, please make sure the UPnP component is installed on your computer. Please
refer to chapter 16. Install UPnP Components for UPnP component installation procedure.
- Enable UPnP port forwarding:
When the UPnP port forwarding is enabled, the IP Camera is allowed to open the web server port on the router
automatically.
NOTE: To enable this function, please make sure that your router supports UPnP and is activated.
- Friendly name:
Set the name for the IP Camera for identity.
22
English
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GCI-C0735P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GCI-C0735P in the language / languages: English as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info