570224
15
Zoom out
Zoom in
Previous page
1/18
Next page
2828
Cleaning the tape drive
To guarantee good recording and playback quality, clean the parts shown
(1, 2, 3) after every 50 hours of use, or once a month.
Open the tape compartment, moisten a cotton swab with alcohol or a speci-
al head-cleaning fluid and clean the idler (3), the capstan (2) and the
magnetic heads (1). Close the cassette compartment. You can also play a
cleaning cassette to clean the magnetic heads (1).
Protect your cassettes from humidity, dust, heat and cold.
Do not store your tapes near devices with strong magnetic fields such as tele-
visions and loudspeakers.
After using a cassette, put it back in its protective case.
Technical data
This device is noise-suppressed according to the applicable EU directives.
This product fulfils the European directives 89/336/EEC, 73/23/EEC and
93/68/EEC.
This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and
therefore the international safety regulation IEC 60065.
Never open the device casing. The manufacturer will not accept any liability
for damage resulting from improper handling.
The type plate is located on the bottom of the device.
INFORMATION
_____________________________________
Technical and design modifications reserved
Power supply
Mains operation: ......... 230 V, 50/60Hz
Max. power consumption: Approx. 20 W
.................(operation), < 2 W (stand-by)
Battery operation: .................8 x 1.5 Volt
.........................(IEC/R140/UM2/C size)
Output
DIN 45324, 10% THD
Music signal power: ........ 2 x 3200 mW
Sine wave power: ............ 2 x 1600 mW
Stereo headphone jack 3.5 mm ø
Radio
frequency bands
FM 87.5 ...108.0 MHz
MW 526.5 ... 1606.5 kHz
LW 148.5 ... 283.5 kHz
CD unit
Frequency response: .... 20 Hz ... 20 kHz
Noise voltage ratio: ................... 65 dB
Tape unit
Sound recording
medium: ..................... Compact cassette
according to DIN 45516
Track position: International quarter-track
Tape
speed: ............................. 4.76 cm/sec.
Motor: ................................... DC motor
Frequency range: ...... 125 Hz ... 10 kHz
Noise
voltage ratio: ............................. 42 dB
Band speed
fluctuation: ............................. 0.25 %
Dimensions and weight
W x H x D ............280 x 175 x 280 mm
Weight .......................................2.5 kg
5
3
2
1
4
31 1
2
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig FREAXX 10 RRCD 4303 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig FREAXX 10 RRCD 4303 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig FREAXX 10 RRCD 4303

Grundig FREAXX 10 RRCD 4303 User Manual - German - 17 pages

Grundig FREAXX 10 RRCD 4303 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info