605186

Grundig FINE ARTS 65 FLX 9492 SL Short Manual

29
Zoom out
Zoom in
Previous page
1/35
Next page
ENGLISH
30
USB RECORDING
--------------------------------------------------------------------------------------------------------------
Recording programmes
You can record the programmes. Programmes are recorded
onto the external data media and the archive is managed via
television.
A memory of 44 MB up to 110 MB is required for a 1 minute
record.
Other recordings in the archive can be watched while a
programme is being recorded.
It is possible to shift channels during recording between
unscrambled channels on the same frequency (DVB-T) or on
the same transponder (DVB-S).
When switched to channels other than (Terrestrial, Cable,
Satellite and USB) during recording, the recording process is
stopped.
One-touch programme recording
1 Select the channel with »1…0« or »P+«, »P–« and press
»
« to start the recording.
– Recording information is displayed: Recording symbol,
channel name, programme time and recording time.
– This information will disappear shortly.
2 To end the recording, press »
7«.
3 Press »

« (green) to accept;
or
to resume recording press »
« (red).
Notes:
7
When recording is complete, it will automatically be
stored on the external data media.
7
If you remove the external data media during recording,
then the recording is cancelled automatically and no data
is recorded onto the external data media.
Programme setting for recording
... with electronic programme guide
Electronic programme guide data can be used for recording.
25 EPG reminder and/or recorder can be set in total.
1 Press »GUIDE« to open the electronic programme guide.
2 Select the preferred TV program with »
V
« or »
Λ
«.
– Information about the actual TV program is displayed.
3 Press »
<
« or »
>
« to select the TV program you want to
record.
4 To add broadcasts to the timer press »OK«.
– Information for the TV program to be recorded will be
displayed.
5 Select the line »Record« with »
>
« and press »OK« to
confirm.
– Recording data range appears.
6 Press »OK« to confirm.
7 Press »EXIT« to end the menu.
Note:
7
If the data for the recording is to be changed, open menu
with »MENU«. Select the menu item »Schedule List« with
»
>
« and confirm with »OK«. Press »

« (green), change
the data and and save it with »

« (blue).
Notes:
7
A warning is displayed before the timer recording starts
and counts down for 10 seconds to allow you to switch to
the channel. At the end of 10 seconds, the channel to be
recorded appears automatically.
7
If the timer recording starts during playback, playback
stops. If you do not select »Yes« in the warning prompt,
recording will start automatically at the end of the
countdown.
7
Only for UPC customers Note: Parts of previous or next
files can be included into the record while the programme
is being recorded resulting from possible Programme
Guide errors. In such cases, keep in mind that the highest
family protection level will apply for the whole recording
if one or more of those programmes have any level of
family protection.
Set the lead/follow-up time
With this function you can change the recording time set by the
electronic TV guide.
If you think that a program will start a few minutes earlier or
will end several minutes later, you can „add“ up to 60 minutes
to this time
1 Open the menu with »MENU«.
2 Select the menu item »Schedule List« with »
>
« or »
<
«
and press »OK« to confirm.
3 Activade the »Padding Time« menu with »

« (blue).
4 Change the start time with »
<
« or »
>
«.
5 Use »
V
« to switch to the line »End« and change the end
time with »
<
« or »
>
«.
6 Save the setting with »

« (green).
7 Press »EXIT« to end the menu.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig FINE ARTS 65 FLX 9492 SL Short at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig FINE ARTS 65 FLX 9492 SL Short in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig FINE ARTS 65 FLX 9492 SL Short

Grundig FINE ARTS 65 FLX 9492 SL Short User Manual - German - 35 pages

Grundig FINE ARTS 65 FLX 9492 SL Short User Manual - Dutch - 35 pages

Grundig FINE ARTS 65 FLX 9492 SL Short User Manual - French - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info