605149

Grundig FINE ARTS 55 FLX 9492 SR Short Manual

12
Zoom out
Zoom in
Previous page
1/35
Next page
13
ENGLISH
19 Confirm the password with »

« (green).
– »Connecting ... Please wait« message will be
displayed, and if the connection is established
»Connection To Gateway: Success« messages will be
displayed.
20 Press »

« (green) to check the performed settings and
also if the local network and internet connection has
been established.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection To
Gateway: Success«, »Internet Connection: Success«
messages will be displayed.
21 To switch to »Source Setup« menu press »

« (blue).
Note:
7
Continue searching for TV channels with:
– point 27 for DVB-C reception;
– point 32 for DVB-T reception.
Tuning cable digital television channels
(DVB-C)
22 Select the option »Cable« with »
<
« or »
>
« and press
»OK« to confirm.
23 Select the line »Scan Type« with »
V
« or »
Λ
«.
Select the option »Quick« or »Full« with »
<
« or »
>
«.
– »Quick« scanning function sets the channels according
to the cable operator information in the broadcasting
signal.
– »Full« scan function scans the entire frequency range
selected. With this search option, search can take a
long time. This search type is recommended. Some
cable providers do not support »Quick« scan.
Note:
7
You can speed up the search. To do this, frequency and
network ID information are required. You may get this
data from your cable operator or find it in the Internet
forums.
24 Use »
V
« to select the push button »Next Page« and
confirm with »OK«.
Note:
7
Perform Channel Type selection. Press »
<
« or »
>
« to select
whether you want to search for only digital channels
(Digital), only Analog channels (Analog) or both (Digital
+ Analog) and press »OK« to select and mark or unmark
the »Digital« and »Analog« items.
25 Press »
« (red) to start searching.
– The »Automatic Channel Search« menu appears, and
the search for TV channels begins.
– The scan is complete as soon as the »Search is
completed!« appears.
26 Select the »Channel Editor« with »
« (red).
Tuning terrestrial digital television channels
(DVB-T)
27 Select the option »Air« with »
<
« or »
>
« and press »OK«
to confirm.
Important:
7
The antenna power supply (5V ) may only be switched
on if the antenna is an active indoor antenna with a signal
amplifier and it is not already supplied with a voltage via a
mains plug (or similar supply). Otherwise you may cause
a short circuit and irreparably damage your antenna.
28 Select the line »Active Antenna Power« with »
V
« or
»
Λ
«.
Switch on the antenna power supply for the antenna with
»
<
« or »
>
« (»On«).
29 Select the line »Next Page« with »
V
« or »
Λ
« and press
»OK« to confirm.
Note:
7
Perform Channel Type selection. Press »
<
« or »
>
« to select
whether you want to search for only digital channels
(Digital), only Analog channels (Analog) or both (Digital
+ Analog) and press »OK« to select and mark or unmark
the »Digital« and »Analog« items.
30 Press »
« (red) to start searching.
– The »Automatic Channel Search« menu appears, and
the search for TV channels begins.
– The scan is complete as soon as the »Search is
completed!« appears.
31 Select the »Channel Editor« with »
« (red).
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig FINE ARTS 55 FLX 9492 SR Short at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig FINE ARTS 55 FLX 9492 SR Short in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig FINE ARTS 55 FLX 9492 SR Short

Grundig FINE ARTS 55 FLX 9492 SR Short User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info