700823
25
Zoom out
Zoom in
Previous page
1/72
Next page
25
EN
DE
Cancelling End Time function
If you want to cancel the End Time
countdown and start the programme
immediately:
1. Press On/Off/Cancel button
for 3 seconds to cancel the
programme.
2. Press On/Off/Cancel button to
start the programme you have
previously selected.
6.10 Starting the programme
Press Start/Pause button to start
the programme.
Start symbol will light up to
indicate that the programme has
started and “:” symbol in the middle
of the remaining time will keep
flashing.
6.11 Child Lock
Machine is equipped with a Child
Lock which prevents interfering
with the current programme flow
by pressing any button. All buttons
except the On/Off/Cancel button on
the control panel are deactivated
when the Child Lock is active.
In order to activate the Child Lock,
press Audio Warning, Child Lock
button for 3 seconds.
To start a new programme after the
current programme is over or to
interrupt the current programme,
the Child Lock should be
deactivated. Press the same button
for 3 seconds again to deactivate
the Child Lock.
C
Lock symbol will appear
on the display when the
Child Lock is activated.
End Time Setting
End Time Setting function allows
you to delay the ending time of the
programme up to 24 hours.
1. Open the loading door and put the
laundry in.
2. Select the drying programme,
spin speed and, if required, the
auxiliary functions.
3. Press End Time Setting selection
button to set the desired End
Time Setting symbol lights up
on the display.(When the button
is pressed and hold, End Time
proceeds uninterruptedly).
4. Press Start/Pause button. End
Time Setting starts to count
down. The “:” in the middle of the
displayed End Time Setting will
start to flash.
C
Additional laundry may be
loaded / taken out during
the End Time period. At
the end of the End Time
countdown process, End
Time symbol disappears,
drying process starts and
the programme duration
is displayed. The time on
the display is the total of
normal drying time and
End Time .
Changing the End Time
If you want to change the time
during countdown:
1. Press On/Off/Cancel button
for 3 seconds to cancel the
programme. Restart the machine
and repeat the End Time
procedure for the desired time.
2. When your machine is operated
for the first time, it starts with the
default programme (wardrobe
dryness for cottons).
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig Edition 70 - Trockner-Dryer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig Edition 70 - Trockner-Dryer in the language / languages: English, German as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info