737717

Grundig DTR RB 3000 DAB Manual

19
Zoom out
Zoom in
Previous page
1/82
Next page
19
ENGLISH
Tuning and storing radio stations
(DAB and FM) – first installation
When the device is switched on for the first time
or after factory reset, the Auto Tuning System will
start to scan the whole DAB bandwidth and store
in the program list.
The device will then scan the FM waveband and
store the first 10 radio stations as presets 1 to 10.
The time is updated automatically.
1 For the best DAB/FM reception, it is sufficient
to extend the telescopic antenna and direct it
accordingly.
2 Press »ON/OFF« to switch on the device.
– Display: »Welcome to« and
then »Scannin
g
···
«.
– The automatic station search starts, searches
and stores the radio stations.
– »Preset Full« displays that 10 FM ra-
dio stations are stored at the presets.
– After the automatic scan, the device switches
to standby, the current time lights up.
Tuning and storing DAB and FM
radio stations – after a removal
You can activate the Auto Tuning System again.
That is reasonable, if you will use the device in
another place or search new DAB radio stations.
1 Press »ON/OFF« to switch on the device.
– Display: the name of the radio station, e.g.
»B5 akt«.
2 Open the menu with »Menu«.
3 Select the option »S
y
stem«
with »r Tuning e« and confirm by
pressing »Select/i«.
4 Select the option »ATS« with »r Tuning e«
and confirm by pressing »Select/i«.
– Display: »No«.
5 Select the option »Yes« with »r Tuning e«
and start the automatic station search by press-
ing »Select/i«.
– The automatic station search starts, searches
and stores the radio stations.
– After the automatic scan, the device switches
to standby, the current time lights up.
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Storing DAB radio stations to
presets
After the automatic station search, all radio sta-
tions will be stored in the program list. You can
store your favored DAB radio stations on presets
1 to 10.
1 Select DAB radio stations with »r Tuning e«.
– Display: the name of the radio station, the
radio station will be activated in 1 second.
2 For storing the DAB radio station on a preset,
press and hold down the required preset but-
ton »1« to »5«, until »Preset 2 stored«
appears.
Note:
7
Press »+5« and the required preset button
»1« to »5« for presets 6 to 10.
Programming DAB radio stations
– manually
1 Select the input source DAB with »Mode/
Alarm«.
2 Open the menu with »Menu«.
– Display: »Full scan«.
3 Select the option »Manual tune«
with »r Tuning e« and confirm by pressing
»Select/i«.
– Display: e.g. »5A I74.928« (channel and
frequency of a DAB radio station).
4 Select the desired frequency/channel
with »r Tuning« or »Tuning e«.
5 Press »Select/i« to confirm the
frequency/channel.
– Display: the signal strength.
6 Press »Select/i« to confirm the setting.
– The DAB radio stations will be stored in the
program list.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig DTR RB 3000 DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig DTR RB 3000 DAB in the language / languages: English, German, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info