18
Automatic station search
The automatic search looks for receivable stations among the avail-
able bouquets of digital stations.
Note:
The »Search Channels« menu is in the main menu under
»Installation«.
1Press »ľVOL« or »ıVOL« to select the »Auto« search type.
2Select »Active Antenna« with »CH Ľ« or »CH Ń« and press
»ľVOL« or »ıVOL« to switch the antenna voltage on or off.
Caution!
An active indoor antenna with a signal amplifier can be
powered via the »ANT IN« connection with a +5 V DC supply
(max. 30 mA).
Only switch on the antenna voltage if the antenna is an active
indoor antenna with a signal amplifier with no power supply of
its own from a mains adapter or similar source. Otherwise
you may cause a short circuit and irreparably damage your
antenna.
3Select »Start Search« with »CH Ľ« or »CH Ń« and press
»OK« to start the search.
– The »Search Channels« page appears.
4When the message »Search Completed Press OK« appears,
press »OK«.
Ending the settings
1Press »EXIT« to finish the setting.
– After the search, the digital receiver switches to preset
station 1.
– You can change the order of the preset stations as required
and delete stations you do not need (see the section on
”editing the station list” on page 20).
BASIC SETTINGS ________________________________________
