30
Resetting the digital receiver to its original state
This function enables you to delete the station lists and all custom
settings.
1 Press »
i« to open the main menu.
2 Select »Box Settings« with »P-« or »P+« and press »OK« to
confirm.
3 Select »Restore Factory Settings« with »P-« or »P+« and press
»OK« to confirm.
4 Press »
Ǹ
« or »
Ƿ
« to select »Yes« and press »OK« to confirm.
– The receiver switches itself off and then on again.
– The »First Time Installation« menu appears.
5 Reprogram the device as described from page 11 onwards.
Updating the digital receiver software
The digital receiver’s technology enables you to update the soft-
ware.
To enable the digital receiver to receive software updates, it must be
in standby mode. The receiver checks for software updates every
night between 01:00 and 05:00. If there is an update, the receiver
will automatically update its software.
You can also search for updates manually.
1 Press »
i« to open the main menu.
2 Select »Technical Information« with »P-« or »P+« and press
»OK« to confirm.
3 Select »System Information« with »P-« or »P+« and press
»OK« to confirm.
4 Confirm »Update Software« with »OK«.
5 Press »
Ǹ
« or »
Ƿ
« to select »Yes« and press »OK« to confirm.
– The receiver checks for a more recent update. The actual
update is always carried out in the time period mentioned
above.
Note:
An interruption when saving the download (for example by dis-
connecting the power cord) can damage the operating software
of the digital receiver.
Read the instructions in the menus carefully.
SPECIAL SETTINGS ______________________________
