26
You can program a recording on a connected video recorder.
A total of eight timer recordings are available.
1 Press »
i« to open the main menu.
2 Select »Timer« with »P-« or »P+« and press »OK« to confirm.
3 Select the timer position (---) with »P-« or »P+« and press
»OK« to confirm.
4 Select »Station« with »P-« or »P+« and press »OK« to
confirm.
5 Press »P-« or »P+« to select the station from the list and press
»OK« to confirm.
6 Select the month with »
Ǹ
« or »
Ƿ
« and press »OK« to confirm.
7 Select the day with »
Ǹ
« or »
Ƿ
« and press »OK« to confirm.
8 Press »0« to »9« to enter the start and end time in four digits.
9 Select the cycle with »
Ǹ
« or »
Ƿ
« and press »OK« to confirm.
10 Press »OK« to save.
– The timer is saved to the timer list.
– You can delete single timers by pressing »
z
« or all timers
by pressing »
ǷǷ
«.
11 Press »i« to conclude the setting.
– The digital receiver switches to the selected station at the set
time.
Notes:
Your DVD or video recorder must also be programmed
accordingly.
During a timer recording, you cannot make any entries using
the remote control.
The timer recording can be interrupted by pressing »
Ǽ« and
»OK«.
If the digital receiver is in standby mode before the timer starts,
it switches back to standby when the timer has finished.
THE RECORDING TIMER_____________________
