ENGLISH
23
Switching on and off
1 Switch on the television and select the preset channel for the
digital receiver.
2 Switch on the digital receiver from standby mode with »
Ǽ«.
3 Switch the digital receiver to standby mode with »
Ǽ«.
– The indicator lights up red.
Mode selection
You can choose between TV and RADIO modes.
1 Press »TV/Radio« to select the mode.
Note:
You can also change modes by selecting »Channel informa-
tion« in the »Main menu«.
Selecting presets
1 Move up and down the channels by pressing »P+« or »P-« as
required.
2 To run through the channels quickly, press and hold down »P+«
or »P-« on the remote control.
3 Enter single-digit or multi-digit preset channel numbers by
pressing »1 ... 0« on the remote control.
– Channels with no presets assigned are ignored.
Notes:
Every time you change station, a display appears informing
you of the current channel number, the name of the station, the
time, the title of the current and subsequent broadcast with start
and end times.
If there is another language or digital audio effects for the
current programme, you will also see this information
(display: y).
If teletext is available on the channel,
ķ
appears in the dis-
play).
In the »Audio settings« menu, you can choose the language or
the digital audio effects. Open the »Audio settings« menu by
pressing »
F
«.
Displaying channel information
1 Display information with »?«.
– The Information disappears automatically after a short time.
BASIC FUNCTIONS______________________________
