ENGLISH
11
Connecting an AV receiver or hi-fi system
1 Plug a standard cinch cable into the »VIDEO OUT« and
»AUDIO OUT L R« sockets (left/right) on the digital receiver and the
corresponding input sockets on the AV receiver or hi-fi system.
Connecting a digital multi-channel amplifier
1 Plug a standard cinch cable into the »DIGITAL AUDIO OUT« socket
on the digital receiver and the corresponding socket on the digital multi-
channel amplifier.
or
Plug a standard optical digital cable into the »DIGITAL AUDIO OUT«
socket on the digital receiver and the corresponding socket on the digital
multi-channel amplifier.
Connecting the power cord
1 Plug the power cord supplied into the »220-240V~ 50/60Hz«
socket on the digital receiver.
2 Plug the power cord into the wall socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices and the antenna.
Inserting batteries in the remote control
1 Open the battery compartment by removing the lid.
2 Insert the batteries (Mignon type, for example UM-3 or AA, 2 x 1.5 V).
Observe the polarity (marked on the base of the battery compartment).
3 Close the battery compartment.
Note:
If the digital receiver no longer reacts properly to remote control com-
mands, the batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking
batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not be
disposed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
CONNECTION AND PREPARATION
_________________
