700801
8
Zoom out
Zoom in
Previous page
1/24
Next page
ENGLISH
8
Preparation
Activate the remote control battery
1 Remove protection film from the battery com-
partment.
The remote control is now functional.
Change remote control batteries
(TYPE AAA)
Note:
7
If your device no longer responds to the
remote control commands, the battery may
be dead. It is imperative that dead batteries
be removed. We do not assume liability for
damage caused by leaked batteries.
Caution:
7
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
1 Hold the remote control with the back side fac-
ing up.
2 Push the detent of the battery holder to the right
and remove battery holder.
3 Remove used battery and insert new battery
into the battery holder, positive pole facing up-
ward.
4 Push battery holder into the remote control until
it clicks into place.
Connecting
Connect Soundbar to the LCD TV
1 Connect a standard audio lead to the
»AUX INPUT« jacks of the Soundbar.
Please be aware of the left and right chan-
nels when doing so (white = left channel,
red = right channel).
2 Connect audio lead to the audio output jacks
of the LCD TV.
Connect external device
An external device, such as a MP3-Player for ex-
ample, can be connected to the »AUX IN« jack.
1 Connect a standard audio lead to the
»AUX IN« jack of the Soundbar.
PREPARATION/CONNECTION
----------------------------------------------------------
2 Connect adapter cable to the external device.
Note:
7
The LCD TV can also be connected via the
»AUX IN« jack if it is not equipped with au-
dio output jacks. In such cases please use the
headphone jack.
Connect mains cable
Check that the mains voltage indicated on the
type label (on the back of the device) corre-
sponds to the local mains voltage. If this is not the
case, please consult your specialist dealer.
1 Plug mains cable plug into the socket
(100 - 240V
~
50/60Hz).
Caution:
7
The Soundbar is connected to the mains via
the mains cable. If you want to disconnect
the Soundbar from the mains completely,
you must pull the mains plug.
7
Please ensure that the mains cable is freely
accessible during operation and is not ob-
structed by any other objects.
Subwoofer Connection
1 Make sure the AC power cord is connected to
a power supply securely.
2 Subwoofer have the wireless bluetooth to
receive the audio signal from the sound bar.
When the blue indicator flashing, the subwoof-
er is in searching bluetooth signal status, the
blue indicator keeps lighting means bluetooth
was connected, if the subwoofer can not con-
nect with the soundbase automatically, please
press pair button on the rear panel of subwoof-
er to reconnect.
3 The subwoofer will memories the sound bar
and repaired automatically when you power
off the subwoofer then power on.
DSB 990 2.1
Made in P.R.Chin a
GSS1010
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig DSB 990 2.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig DSB 990 2.1 in the language / languages: English, German as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info