Manual Grundig DSB 980 (page 40 of 110) (English, German, French, Polish, Spanish)

755935

Zoom out

Zoom in

1/110

40 ENGLISH

MAIN OPERATION ____________________________

Scanning for stations

•The first time you select DAB radio mode, or if

the station list is empty, the radio automatically

performs a full scan to see what stations are

available. You may also need to start a scan

manually to update the list of stations.

•To start a scan manually, choose Full scan. To

scan only stations with good signal strength,

select Local scan. Once the scan is complete,

the radio shows a list of available stations.

•To remove stations that are listed but not

unavailable, choose Prune invalid. Turn the

navigate reel to view a list of stations and press

to select.

•Once selected, the station plays and the screen

show information about station, track or show

as broadcast.

•On the screen press [, ] on the remote control

to wiew the station list.

Settings

•Dynamic range compression (DRC) If you are

listening to music with a high dynamic range in

a noisy environment, you may wish to compress

the audio dynamic range. This makes quiet

sounds louder, and loud sounds quieter. You can

change DRC as off, low or high.

•Station order You can choose the order of the

DAB station list to be either Alphanumeric,

Ensemble or Valid. Ensemble lists groups of

stations that are broadcast together on the

same ensemble. Valid lists valid stations first,

alphanumerically, then off-air stations.

FM Radio

•FM radio mode receives analogue radio from

the FM and displays RDS (Radio Data System)

information about the station and where

broadcast.

•The first time you select FM radio mode, or if the

station list is empty, the device will run auto scan

and save the stations to the preset list.

•To find a station, press [ ] The frequency

display starts to run up as the device scans the

FM band. Alternatively, you can scan up or down

by turning the navigate knob.

Settings

•ATS: Run the auto scan function once

•Scan settings By default, FM scans stop at

any available station. This may result in a poor

signal-to-noise ratio (hiss) from weak stations.

To change the scan settings to stop only at

stations with good signal strength, select Yes

after choosing Strong station only.

•Audio settings All stereo stations are reproduced

in stereo. For weak stations, this may result in

a poor signal-to-noise ratio (hiss). To play weak

stations in mono, select FM weak reception:

Listen in mono only and then YES.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grundig DSB 980 in the language / languages: English, German, French, Polish, Spanish as an attachment in your email.

The manual is 3,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grundig DSB 980 Manual

Product: