Manual Grundig DSB 980 (page 37 of 110) (English, German, French, Polish, Spanish)

755935

Zoom out

Zoom in

1/110

ENGLISH

•You can also choose to keep the network

connected by using the “Keep network

connected” option in the network settings menu.

•In the standby mode, the Wi-Fi signal indicator

is displayed with or without a cross through it

according to the chosen network settings.

•You will then need to set “Keep network

connected”option.

•Choose < YES > to activate this function (if you

will use the UNDOK app for remote control) or

choose < NO > to deactivate this function.

•The Soundbar will then start scanning for

available Wi-Fi networks.

•Display: < Network wizard Scanning / > will

appear. After completed

•Display: < SSID > list will appear for selection.

•After network wizard scan is completed, the

name of your wireless network (SSID) will appear

on the screen together with all other available

networks (SSID List).

•Highlight the name of your wireless network in

the SSID list by scrolling up or down and go to

the next steps to make required inputs.

Note:

•If your Wi-Fi network is not found in SSID list;

-then device may be too far from your Wi-Fi router.

Or;

-you may need to switch on your wireless router

(please see the instructions supplied with it).Or;

-it may be because the router is configured not

to broadcast the SSID. You should then select the

< Manual config > option in order to enter the

network details manually.

WI-FI NETWORK-FIRST INSTALLATION ___________

-If your network name is being broadcast, and it

was not found, then try selecting the < Rescan>

option to scan again or try moving your Soundbar

closer to your Wi-Fi router.

WPS (Optional)

Note:

•WPS (Wi-Fi Protected Setup) encrypted networks

are identified by “[WPS]” shown in front of the

SSID, and have two methods of connection.

Select one and follow the prompts. When using

the Network wizard an additional option < Skip

WPS > is available.

< Push Button >

•If you select this option, the Soundbar prompts

you to press the connect button on the router

and then press the [ ] button.

< PIN >

•If you select the option < PIN >, the Soundbar

generates an 8-digit code number which you

should enter into the wireless router using

a web browser (refer to your router’s user

documentation). You should then press the[ ]

button.

< Skip WPS>

•Select < Skip WPS > to skip WPS setup and

go directly to the < Key > menu to enter the

network password when your Wi-Fi router is

a standard encrypted network that does not

support WPS.

Key (Password)

•After your Wi-Fi network is found by the device,

the »Password entry« screen will appear.

•if your network is using one of the encryption

systems: WEP, WPA/WPA2. You will need to enter

the correct encryption key (password) into the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grundig DSB 980 in the language / languages: English, German, French, Polish, Spanish as an attachment in your email.

The manual is 3,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grundig DSB 980 Manual

Product: