700804
47
Zoom out
Zoom in
Previous page
1/80
Next page
47
ENGLISH
Connecting external data media
Notes:
7
Before connecting the external data medium
it is recommended to switch the Smart Re-
ceiver to stand-by mode.
7
Before removing the external data medium,
the Smart Receiver must be switched to
standby, so that no data loss occurs.
7
Your Smart Receiver features two USB sock-
ets, »USB« and »USB (HDD)«.
»USB (HDD)« is used to connect data media,
which require an additional power supply
– for example, external hard disks.
1 Insert the USB plug of the USB memory stick
into the »USB« socket of the Smart Receiver;
or
connect the »USB (HDD)« socket of the
Smart Receiver and the corresponding sock-
et of the data medium (external hard disk)
using a USB cable.
Notes:
7
»USB« interface of the device supports
500mA current according to the USB stan-
dard. Devices such as external hard disk
and etc. that consume more power can only
be connected to the »USB (HDD)« USB in-
terface of the Smart Receiver.
7
If you are using a power cable for the ex-
ternal hard disk that you have connected to
the »USB (HDD)« interface, then the power
cable of the external hard disk must also be
unplugged when the device is turned off.
7
You must not disconnect the USB Device
from the Smart Receiver while a file on the
USB Device is being read by the device.
USB Recording settings
Selecting the menu
1 Open the menu with »MENU«.
2 Select the menu item »USB RECORDING«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The »USB RECORDING« menu appears.
PRnP
Disk
Partition
Safely Remove Disk
Auto Preview
On
USB RECORDING
Disk Management
Capacity Used 3 %
Used (MB) 1249
Total (MB) 38145
SD Record Time Remainung 1008 min
HD Record Time Remainung 288 min
dd.mm.yyyy
hh:mm
USB
(C:)
OK
USB RECORDING
--------------------------------------------------------------------------------------------------------------
00:00
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig DSB 8350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig DSB 8350 in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig DSB 8350

Grundig DSB 8350 User Manual - German - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info