D1110 - D1120 - D1130 -D1140
D1115 - D1125 - D1135 -D1145
www.grundig-dect.com
18
Prefix
If a PABX is used in a private network, you can program the outside call prefix.
This function sets:
The PABX prefix number: this number will be added at the beginning of the number you dialed.
The number to be detected: if the number you dialed starts with the recorded sequence, this
sequence will be automatically deleted.
These two settings are not applied if number you dialed starts with "#", "*" or "P".
1. Go to the menu "
advanced set " / " auto prefix ".
- Select "detect digit " to define the number giving you access to the outside line.
- Select "prefix NB." to specify the «digits before prefix».
2. Press
.
F
lash timing
If you connect your telephone to a private automatic branch exchange or use it in a foreign country,
you may need to modify the flash duration in order to use your telephone correctly with regard to the
following functionalities: outgoing 2nd call, incoming 2nd call, conference call.
Contact your administrator, who will supply the appropriate time period, and proceed to the new
settings.
1. Go to the menu "
advanced set " / " recall time ".
2. Select the appropriate time period, press
.
SHORT
Spain, United Kingdom, Italy, Switzerland, Austria, Netherlands, Poland, Belgium,
Ireland, Hungary, Slovenia, Romania, Slovakia, Czech Republic and Sweden
MEDIUM
Germany, France, Greece, Portugal, Croatia, Serbia, Montenegro, Bosnia and
Macedonia
LONG
Bulgaria
Modifying the dialing mode
Most telephone systems use the tone dialing mode. You can, however, use the pulse dialing mode:
1. Go to the menu "
advanced set " / " dial mode " / " tone " or " pulse ".
2. Press .
First ring
Activating this function is only useful if your line does not have the CLIP service.
This menu allows you to arrange for your telephone to ring when a call is received even if it is
connected on the same line with another device (a fax, a cord telephone, etc.).
This function is activated as default. It will be automatically deactivated when a CLIP call is received
(the number of which will be displayed on the handset screen).
1. Go to the menu "
advanced set " / " first ring ".
2. Use the or key to change the state.
3. Press
.
