D1110 - D1120 - D1130 -D1140
D1115 - D1125 - D1135 -D1145
www.grundig-dect.com
14
USING THE MULTI-HANDSET CAPABILITIES
These functions are used for handset management when two or more handsets are registered on the
same base.
I
ntercom Call/Intercom
1. Make sure your handset is on standby mode.
2. Press the
key on the handset.
If your installation has two handsets:
The second handset rings and the message "Intercom " and the calling handset number appear on the
screen.
If your telephone installation has more than two handsets:
1. The icon INT blinks on the screen and the number of all registered handsets.
2. Enter the desired handset number. The desired handset rings.
- OR -
Press the
key if you want to call all handsets.
A
nswering an internal call
1. " Intercom " and the calling handset number appear on the screen. The " " is blinking.
2. Press the
key to answer.
Managing an external and an internal call
Transfering an external call to another handset registered on same base
1. During a call, press
. The external user is put on hold.
2. Enter the internal call number. When the user answers, you can announce the call.
3. Press the
key to transfer the call.
If the called handset does not answer, press to take back the call.
Switching between an external call and an internal call
During a double conversation, hold down the key
to switch between an external call and an
internal call.
Making conference calls (3-way conversation)
You can connect one external call to two handsets registered at the base station. To set up a
telephone conference from an external call:
1. Press
key. The external user is put on hold.
2. Enter the internal call number. Wait until the internal user answers.
3. Press
key, until an aural signal is heard to start a three-way conference.
"conference" is displayed on the handset screen.
The activation of 3-way conference is possible only when you are in conversation
with the internal handset call.
