Manual Grundig CMS 5000 (page 27 of 70) (English, German, French, Spanish)

755864

Zoom out

Zoom in

1/70

ENGLISH

GETTING STARTED ------------------------------------------------------------------------------------------------------

Connection and Preparation

Connect to the speaker using the cable with

2-pin connectors. Screw the connectors into the

speaker out terminals at the rear of the main unit

and the speakers.

Screw the external WiFi antenna for wireless

network connection.

Connect the copper cable to the red (+) jack and

connect the silver cable to the black (-) jack.

Plug the wire DAB/FM antenna for DAB and

FM reception.

Plug the power cord into power socket, the

device starts up.

Connecting to the network

7 Power on your device and connect to a wire-

less access point, router or similar net-work

device.

7 The network device needs to support WiFi

(802.11 a/b/g/n) wireless connection.

Make sure you have setup the wireless network

and you have the WEP, WPA or WPA2 security

password to activate the connection. You may

also use the WPS (WiFi Protected Setup) function

for easy pairing between the network device and

CMS 5000 BT DAB+ WEB Check if the light

indicators on the network device are in appropri-

ate status.

Using CDs

The device is suitable for music

CDs displaying the logo shown

here (CDDA) and for CD-Rs and

CD-RWs with audio data. You

can play standard 12 cm CDs

on your device. The radio is able to play CD-R

and CD-RW discs containing MP3 and WMA

ﬁles. It is assumed in this section that a ﬁle is

equivalent to a CD track.

An MP3 / WMA CD may not contain more than

999 ﬁles and not more than 99 folders. MP3

and WMA ﬁles should be created with standard

audio sample rate of 44.1kHz.

MP3 and WMA data rates up to 320 kilobits per

second are supported. WMA Lossless ﬁles are

not supported. The unit will not play ﬁles which

include digital rights management (DRM) protec-

tion. When burning CD-R and CD-RW discs with

audio ﬁles, various problems may arise which

could lead to problems with playback. Typically

such problems are caused by poor CD writing

or audio encoding software, or by the hardware

settings of the PC‘s CD writer, or by the CD being

used. Should such problems arise, contact the

customer services of your CD writer or software

manufacturer or look in their product documen-

tation for relevant information. When you are

making audio CDs, take care to observe all legal

guidelines and ensure that the copyright of third

parties is not infringed.

Connecting a USB memory stick

Insert the USB plug of a USB memory stick into

the USB port at the front of the device. The sys-

tem of the USB must be FAT 16, FAT 32. It is not

compatible with NTFS or other systems.

Connecting an audio source

via RCA audio in

Use a standard RCA audio cable to connect

the audio output from the external device to the

audio input sockets on the back of the device.

Connecting the headphones

Turn the volume down before using the head-

phones.

Inset the headphone plug (standard 3.5mm) into

the headphone socket at the front of the device.

General Device Functions

On the playing screen, rotate the volume knob

or press » +« / » « on the remote control to

adjust the volume. Switch off the sound by press-

ing » « on the remote control.

Press » / MODE« on the device or on the

remote control to select modes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grundig CMS 5000 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grundig CMS 5000 Manual

Product: