700792
22
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
22
CONNECTION AND PREPARATION
---------------------------------------
Connecting the loudspeakers
1 Insert the wires of the loudspeaker cable into
the »SPEAKER
OUTPUT (4 �)
R L« fasteners
on the hi-fi system.
Note:
7
Observe the left and right channels (L = left
channel, R = right channel).
Connecting the antenna
1 Plug the roof antenna cable into the antenna
socket »FM ANTENNA« on the hi-fi system.
Note:
7
If no roof antenna is available, use the
auxiliary antenna supplied. When suitably
positioned and with adequate signal, this
antenna provides adequate reception of
FM channels. Do not shorten the auxiliary
antenna.
Connecting an MP3 player or a
USB memory stick
Caution:
7
The hi-fi system must be switched off while
the USB connection is being made. If it is not
switched off, data can be lost.
1 Connect the USB interface of the MP3 player
to the » « socket of the hi-fi system with a
standard USB cable;
or
insert the USB plug of the USB memory stick
into the USB interface » « of the hi-fi sys-
tem.
Connecting external devices
Note:
7
Switch the hi-fi system off before you connect
external devices.
1 Use standard audio cables (3,5mm) to cona-
nect the audio outputs of the external device to
the »AUDIO IN« sockets on the hi-fi system.
Connecting the power cord
Notes:
7
Check that the mains voltage on the type
plate (on the bottom of the hi-fi system) cor-
responds to your local mains supply. If this is
not the case, contact your specialist dealer.
7
All the other devices/loudspeakers must be
connected before you connect the power
cord.
1 Plug the power cord into the wall socket.
Caution:
7
The hi-fi system is connected to the mains
with the power cord. Pull out the power plug
if you want to completely disconnect the hi-fi
system from the mains.
7
Make sure the power plug is easily acces-
sible during operation and not hindered by
other objects.
Activating the battery in the re-
mote control
1 Open the battery compartment by pressing
down on the catch and then remove the lid.
2 Observe the polarity marked on the base of
the battery compartment when inserting the
batteries (micro batteries, 1 x 1.5 V, R 03/UM
4/AAA).
3 Close the battery compartment.
Notes:
7
Do not expose the batteries to extreme heat,
caused for example by direct sunlight, heat-
ers or fire.
7
Remove the batteries when they are flat or
when you know that the hi-fi system will not
be used for a long period of time. The man-
ufacturer accepts no liability for damage
caused by leaking batteries.
Environmental note:
7
Batteries, including those which do not con-
tain heavy metal, should not be disposed
of with household waste. Always dispose
of used batteries in accordance with local
environmental regulations.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig CMS 1000 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig CMS 1000 BT in the language / languages: English, German as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info