478738

Grundig CDP 410 Manual

12
Zoom out
Zoom in
Previous page
1/66
Next page
POWER SUPPLY
12
GB
Batteries
• Open the battery compartment and insert as
indicated two alkaline batteries type LR6, AM3,
AA or insert two rechargeable Nickel-Cadmium
batteries .
• Remove the batteries if they are empty or if the
CD player is not to be used for a long time.
The display indicates when the battery voltage is
too low:
• When the indicator flashes, the batteries
are getting too weak.
• When appears continuously, the battery
voltage is too low and the CD player will soon
shut down.
Note:
The battery supply is switched off when the
DC IN 6.0 V socket is in use.
When changing over to battery supply, pull out the
plug from the DC IN 6.0 V socket.
Mains adapter (supplied)
1 Make sure that the local voltage corresponds to
the voltage of the adapter.
2
Connect the supplied mains adapter (6.0 V/450 mA
Direct Current plus-pole to the centre pin) to the
player's DC IN 6.0 V jack and to the wall outlet.
• Always disconnect the adapter if you are not
using it.
Note:
The CD-player remains connected to the
mains even when it is switched off.
The unit is only fully isolated from the mains if the
mains adapter is removed from the wall socket.
CD IN
AUX, LINE IN)
Note on Environmental Protection
Do not throw exhausted batteries in
the household refuse.
Hand over the old batteries to your
dealer or
public collecting points when
buying new ones.
DAS TRACK MIN SEC
3 mm
min
Recharging Nickel-Cadmium batteries
(size AA)
Your mains adapter also works as a charger.
This is only possible with Ni-Cd batteries (size AA)
1.2 V/600mAh.
Note: As a quick reference when buying the Ni-Cd
batteries, be sure that the metal cap on the nega-
tive pole is exposed more than 3 mm as illustrated.
• Charge the batteries prior to first use and also if
the batteries have not been used for a long
period.
• Install the rechargeable batteries in the battery
compartment as described before.
• Connect the AC adapter to the CD-player and
then to the wall outlet.
• The batteries should be allowed to recharge for
8 hours for full capacity.
• The ambient temperature for recharging should
be between 5˚C and 40˚C.
• The player can be operated while the batteries
are being recharged.
Line out
Reproduction through a stereo system
• Turn down the volume of your stereo system.
• Connect a signal lead to the LINE OUT jack of
the CD player and to the input jacks CD IN,
AUX(iliary) or LINE IN of the other set (amplifier,
receiver, radio cassette recorder etc.).
• Adjust the sound with the controls of the stereo
system.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig CDP 410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig CDP 410 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info