606119
19
Zoom out
Zoom in
Previous page
1/35
Next page
ENGLISH
20
Wireless network
Wireless network connection
There are different ways of making the wireless network
settings. »Wireless« and »Wireless WPS« (WiFi Protected
Setup).
1 Television includes a built-in Wireless WiFi Adapter to
connect it to wireless network.
Notes:
7
Wireless LAN adapter supports IEEE 802.11B/G and
N communication protocols. We recommend you to use
IEEE 802.11N protocol to obtain the best performance in
wireless HD video playback.
7
If you use a modem that supports IEEE 802.11B/G, video
playback performance may be poor when compared
to a modem that supports IEEE 802.11N since the data
transfer rate of IEEE 802.11B/G protocol is lower.
7
Please note that video playback performance in a DLNA
application on a wireless local network and in a SMART
Inter@ctive TV 3.0 application on a network with internet
connection depends on the number of users on the
network as it is the case in every wireless network.
7
It is recommended to switch off the equipment that are
not in use in home network in order to avoid unnecessary
network traffic.
7
Placing the modem or wireless network sharer on an
elevated location will increase the wireless connection
reception strength.
7
Wireless connection reception strength may vary
depending on the type of the modem and the distance
between the modem and television.
NETWORK SETUP
-------------------------------------------------------------------------------------------------------------
Wireless network settings
You have several ways to connect your TV to your home
network.
A Automatic connection,
all data regarding connection settings (»IP Address«,
»Netmask«, »Gateway« and »DNS«) are obtained from
modem automatically.
Depending on the router, you can use the following
options:
Option “WPS-PBC” (Push Button Configuration);
– Connecting with a WPS PIN;
Connecting by entering the network password.
B Manual connection,
all data regarding connection settings (»IP Address«,
»Netmask«, »Gateway« and »DNS«) must be configured
manually.
Technical requirements
Most of the home networks are Dynamic. If you have a
dynamic network, you must use a DSL modem that supports
DHCP. Modems and IP sharers that support DHCP obtain the
»IP Address«, »Netmask«, »Gateway« and »DNS« values
required for internet access automatically, and thus you are
not required to enter those values manually.
Wireless WPS network connection through
by pressing a button
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with »OK«.
3 Select the menu item »Network Configuration« with »
>
«
or »
<
« and press »OK« to confirm.
»Network configuration« menu is displayed.
4 Select the line »Change Connection Type« with »
V
« or
»
Λ
« and press »OK« to confirm.
5 Select the option »Wireless WPS« with »
<
« or »
>
« and
press »OK« to confirm.
WiFi warning screen will be displayed.
6 Activate WiFi with »

« (green).
7 Select the line »WPS Type« with »
V
« or »
Λ
« and select
the option »Push Button« with »
<
« or »
>
«.
Network Configuration
Timer Applications TV Settings
Back ExitConnect
Test Connection
Change Area
Change Connection Type Wireless WPS
WiFi On
WPS Type
Push Button
Select Access Point N/A
Network Configuration AUTO
Advanced
8 With »
« (red) select »Connect« to establish modem
connection.
»Push the WPS button on your Access Point« message
is displayed.
9 Press the WPS button on the router.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig Berlin 55 CLX 8595 HD Short at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig Berlin 55 CLX 8595 HD Short in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig Berlin 55 CLX 8595 HD Short

Grundig Berlin 55 CLX 8595 HD Short User Manual - English, German - 35 pages

Grundig Berlin 55 CLX 8595 HD Short User Manual - Dutch - 35 pages

Grundig Berlin 55 CLX 8595 HD Short User Manual - French - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info