8
ENGLISH
2 To store a station, press »1«, »2«, »3«, »4«
or »5« until you hear a signal or muting.
Selecting stored stations
1 Press the memory button briefly.
– Display: the stored station, e.g. »ENERGY«.
The stations remain stored even if the device
is disconnected from the power supply.
Activating and deactivating TP
(Traffic Program)
1 To switch this function on and off, press TP.
– Display: »TP«.
Note:
If you are tuned to a station which does not
broadcast traffic news, the device automati-
cally searches for the next station which
does.
If the TP function is activated, the CD or Tape
mode is also interrupted for traffic news.
Search
1 Press rocker switch to select a new stati-
on.
Starting the IS search in DAB mode after
switching on the device for the first time:
2 Press the upper soft key to select IS.
3 Start the search with the lower soft key
(GO).
You can only select known ensembles.
Manual station search
1 Press the upper soft key to select MAN.
2 Use the rocker switch to change the fre-
quency in incremental steps.
3 Hold down the rocker switch for fast
tuning. Press it repeatedly to increase or
decrease the FM frequency by 50 kHz.
Storing stations in the memory
Selecting the DAB or FM memory level
1 Keep pressing »
I
I
I
« until the FM1 - FM3 or
DAB1 - DAB3 memory level is active.
RADIO (TUNER) MODE
_________________________________________________________________________________
Selecting the radio input source
1 With SOURCE you select the RADIO FM or
RADIO AM input source.
Note:
When the device is connected for the first
time, the RDS (IS) search starts automatically.
When you select a new frequency band, the
most recently selected station is played (Last
Station Memory).
