630678
54
Zoom out
Zoom in
Previous page
1/125
Next page
ENGLISH
54
USB OPERATION
--------------------------------------------------------------------------------------------
Connecting external data media
It is advised to put the television on stand-by
mode with »
8« before connecting the external
data medium. Connect the device and then
switch the television on again.
Before disconnecting the data medium, the
television must first be switched to standby,
otherwise files can be damaged.
Notes:
7
The socket USB3 at the side of the televi-
sion supports 500 mA current according to
the USB standard. Devices such as external
hard disk and etc. that consume more
power can only be connected to the USB1
or USB2 interface of the television.
7
To get higher efficiency from your devices
supporting USB 3.0 it is recommended to
connect to USB1 or USB2 interface.
7
If you are using a power cable for the
external hard disk that you have connected
to the USB1 or USB2 USB interface, then
the power cable of the external hard disk
must also be unplugged when the TV is
turned off.
7
You must not disconnect the USB Device
from the TV while a file on the USB Device
is being read by the TV.
7
A bi-directional data transfer as defined for
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
7
USB transfer is not an operating mode in
itself. It is only an additional function.
1 Connect the USB1 or USB2 USB interface
on the television and the related data output
on the external device (external hard disk,
digital camera, card reader or MP3 player)
with a USB cable;
or
plug the memory stick in the USB3 socket
at the side of the television.
Removing the external data
media
Before removing the external data medium, log
off the data medium.
1 Open the menu with »MENU«.
2 Select the menu item »Media Center« with
»
V
«, »
Λ
«, »
<
« or »
>
« and press »OK« to
confirm.
»Media Player« menu is displayed.
3 Select the name of the data medium with
»
V
« or »
Λ
« and press »OK« to confirm.
4 Select the »Media Options« with »TOOLS«.
5 Select the line »Disk Management« with
»
V
« or »
Λ
« and press »OK« to confirm.
6 Select the line »Safely Remove Disk« with
»
V
« or »
Λ
« and press »OK« to confirm.
7 Remove the data medium from the socket.
8 Press »EXIT« to end the setting.
MAIN
AV/ S-VHS
SERVICE
Optic Out LAN
USB3
HDMI3
HDMI4
(ARC)
SATELLITE
13/18V max.500mA
ANT-IN
5 V max.50mA
(MAIN) (SUB)
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 55 GUS 9688 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 55 GUS 9688 in the language / languages: English as an attachment in your email.

The manual is 11,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 55 GUS 9688

Grundig 55 GUS 9688 User Manual - German - 129 pages

Grundig 55 GUS 9688 User Manual - Dutch - 124 pages

Grundig 55 GUS 9688 User Manual - French - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info