569691
2
Zoom out
Zoom in
Previous page
1/78
Next page
LCD TV
50 VLE 941 BL
EN
ENGLISH
2
CONTENTS
-------------------------------------------------------------------------------------------------------------------------------------
4 SETUP AND SAFETY
6 GENERAL INFORMATION
6 Special features of your television set
7 Receiving digital channels
7 Grundig SCR system
7 Important notes on environmental
protection
7 Notes on still images
8 CONNECTION AND PREPARATION
8 Connecting the antenna and power cord
9 Inserting batteries into the remote control
10 OVERVIEW
10 Connections on the television set
11 Controls on the television set
12 The remote control – Main functions
12 The GRUNDIG „Voice Remote“
13 The remote control –
All functions
14 SETTINGS
14 Initial set-up and tuning television
channels
14 Selecting language, country and
operating mode
15 Tuning the television channels from
satellite (DVB-S)
17 Tuning terrestrial television channels
(DVB-T)
17 Tuning television channels from the cable
provider (DVB-C)
18 Changing the program table for the
digital channels
21 Picture settings
22 Sound settings
24 TELEVISION - OPERATION
24 Basic functions
25 Zoom function
25 Eco mode
26 Zapping function
26 Electronic TV guide
27 Changing the picture format
28 NETWORK INSTALLATION
28 Network Connection
28 Wired network
31 Wireless network connection
34 SMART INTER@ACTIVE TV 2.0
FUNCTION
34 Smart Inter@active TV 2.0 Applikationen
37 GRUNDIG Online Store
40 MULTI MEDIA SERVER MODE
40 Playing the video, music and image files
with home network connection
42 USB OPERATION
42 File formats
43 Connecting external data media
43 Removing the external data media
44 The file browser
44 Settings in the USB setup menu
45 Basic playback functions
46 Additional playback functions
48 TELETEXT OPERATION
48 TOP text or FLOF text mode
48 Additional functions
49 INTERACTIVE PORTAL (HBBTV)
49 What is HbbTV?
49 Additional functions for video sequences
50 CONVENIENCE FUNCTIONS
50 Opening the SETTINGS menu
50 Language settings
51 Setting the date and time
51 Timer functions
52 Parental control settings
54 Updating software (OAD)
54 Updating software (Online)
54 Restoring the television to the default
settings
55 OPERATION USING EXTERNAL
DEVICES
55 DIGI LINK
55 The DIGI LINK functions on your television
56 Device operation
57 High definition HD ready
57 Connection options
58 Connecting external devices
59 Using a DVD player, DVD recorder,
video recorder or set-top box
59 Headphones
60 Hi-fi System
3
ENGLISH
CONTENTS
-------------------------------------------------------------------------------------------------------------------------------------
62 OPERATION AS A PC MONITOR
62 Connecting a PC
62 Selecting presets for the PC
62 Settings for PC mode
63 OPERATION WITH A COMMON
INTERFACE
63 What is a Common Interface?
63 Inserting the CA module
63 Access control for CI module and
smart card
64 SPECIAL SETTINGS
64 Searching for digital television channels
from a satellite automatically
65 Searching for digital television channels
from a satellite manually
65 LNB settings
66 Settings for motorised antennas
(DiSEqC 1.2)
69 Searching for digital terrestrial
TV channels automatically
70 Searching for digital terrestrial
TV channels manually
70 Tuning analogue television channels
72 Changing stored analogue channels
73 Displaying signal information
74 Deactivate and activate HbbTV
74 Deactivate and activate digital teletext
75 INFORMATION
75 Product Fiche
75 Other information
76 Service information for dealers
76 Environmental note
77 Troubleshooting
ENGLISH
4
SETUP AND SAFETY
------------------------------------------------------------------------------------------------------
Please note the following instructions when
setting up the television set:
7
This television is designed to receive and dis-
play video and audio signals.
All other uses are expressly prohibited.
7
The ideal viewing distance is five times the
diagonal screen size.
7
Light falling on the screen impairs picture
quality.
7
To ensure the device is always adequately
ventilated, make sure there is sufficient space
between the television set and nearby furni-
ture.
7
The television is designed for use in dry rooms.
If you do use it outdoors, make sure it is pro-
tected from moisture such as rain or splashing
water.
Never expose the television set to moisture.
7
Do not place any vessels such as vases on the
television, as they may spill liquid, thus present-
ing a safety risk.
7
Place the television on a hard, level surface.
7
Do not place any objects such as newspapers
on the television or put cloth or similar items
under it.
7
Do not place the television close to heating
units or in direct sunlight, as this will impair
cooling.
7
Heat build-up can be dangerous and shortens
the service life of the television. For reasons of
safety, have a repairman remove any dirt in
the television from time to time.
7
Never open the television under any circum-
stances. Warranty claims are excluded for
damage resulting from improper handling.
7
Make sure the power cord or the power sup-
ply unit (if provided) are not damaged.
7
Only operate the television with the power
supply/power cord provided.
7
Thunderstorms are a danger to all electrical
devices. Even when the television is switched
off, it can be damaged by a lightning strike to
the mains or the antenna. Always disconnect
the mains and antenna plugs during a storm.
7
Use a damp, soft cloth to clean the screen.
Do not use water with soap or detergent.
7
When deciding where to put the device, re-
member that furniture is often coated with
various types of varnish and plastic. Many of
these contain chemicals which can corrode
the feet of the device, leaving marks on the
surface of the furniture which can be difficult
or impossible to remove.
7
The screen of your LCD/LED television meets
the highest quality standards and has been
checked for pixel faults.
Despite the great care taken in manufacturing,
technological reasons make it impossible to
completely discount the possibility that some
pixels may be faulty.
Provided they are within the thresholds speci-
fied by the DIN norm, pixel faults of this kind
cannot be regarded as a defect as defined by
the warranty.
7
To ensure fires do not occur,
always keep candles and
other open flames away from
the device.
5
ENGLISH
7
Do not connect any other equipment while the
device is switched on. Also switch off other
equipment before connecting it.
7
Do not plug in the power cord of the device
until you have connected the external equip-
ment and the antenna.
7
Make sure the mains plug is freely accessible.
7
Keep the TV away from following devices as
much as possible: cell phone, microwave and
other devices that uses high frequency radio
wave. Otherwise, TV may be malfunction due
to radio wave interference.
7
Do not expose the batteries to excessive heat
such as direct sunlight, fire, etc.
7
Do not use old and unused batteries together.
7
Only replace the exhausted batteries with
those having the same model, value and prop-
erties.
7
By ensuring proper disposal of these batteries,
you will have contributed in prevention of po-
tential hazards on the environment and human
health that may arise from inappropriate dis-
posal of the batteries.
Caution:
7
If you plan on using a wall bracket for your
television, make sure you read the assembly
manual for the wall bracket or have a spe-
cialist assemble it.
7
When purchasing the wall bracket, make
sure that all the fastening points on the televi
-
sion are also on the wall bracket and that
they are all used when mounting it.
SETUP AND SAFETY
------------------------------------------------------------------------------------------------------
ENGLISH
6
Special features of your
television set
7
You can receive and watch digital TV chan-
nels using your television set (via DVB-S, DVB-T
and DVB-C) including High Definition pro-
grammes (HD). However, the reception of digi-
tal TV channels in HD is currently limited to a
few countries in Europe.
7
Although this television set complies with the
current DVB-S, DVB-T and DVB-C standards
(status: August 2010), the compatibility with
future DVB-S satellite transmissions as well
as terrestrial DVB-T and DVB-C cable pro-
grammes cannot be guaranteed.
7
Your television set can receive and process
all analogue and non-encrypted digi-
tal TV channels. The television set is also
equipped with digital and analogue receivers.
7
The electronic TV guide (for digital channels
only) informs you about any schedule changes
at short notice, and provides an overview of
all the broadcasters' schedules for the next few
days. Detailed information on the individual
television programmes are when provided
by the broadcasting station are also avail-
able in the electronic TV guide.
7
You can connect various data media, such as
an external hard drive, a USB memory stick or
a digital camera, to the USB socket. Using the
file browser, you can then select and play the
file formats of your choice (for example, MP4,
MP3 or JPEG data).
GENERAL INFORMATION
---------------------------------------------------------------------------------
7
Smart Inter@ctive TV feature provides your TV
with the Internet services and pages when it is
connected to the Internet. You can visit popu-
lar video and photo sharing sites as well as
social networks.
7
DLNA feature allows you to use a wired or
wireless local network to access your content
that were recorded with DLNA compatible de-
vices we use at our daily lives such as a PC,
mobile phone or NAS (Network Attached
Storage) which are operated as DMS (Digital
Medial Server). Thanks to DMR feature, when
DLNA application has been started, you can
automatically start and stop media playing on
devices with DMC feature.
7
Devices that contain and serve video, music
or image files are called Server. This television
receives video, music and image files from the
server through home network, allowing you to
access and play such media even when your
television is located in a different room then
the server. A DLNA compatible device such as
a PC, mobile phone, NAS or a NAS-like (Net-
work attached storage) device which operates
as a DMS (Digital Media Server) is required
in order to use home network.
7
ENGLISH
GENERAL INFORMATION
---------------------------------------------------------------------------------
Receiving digital channels
7
You require a satellite antenna to receive
digital satellite channels (DVB-S).
7
You require a digital roof antenna or indoor
antenna (passive or active indoor antenna
with its own power supply) to receive digital
television channels (DVB-T).
7
If you wish to receive digital television chan-
nels via your cable system (DVB-C), the an-
tenna cable for your cable operator must be
connected to the television set.
7
Unlike analogue broadcasting, not every
channel has its own transmission frequency.
Instead, several channels are grouped into
what are known as bouquets on a regional or
national level. You can find the current trans-
mission information on teletext from various
broadcasters, or by consulting a current TV
guide or the Internet.
7
Various digital television channels from private
broadcasters are encrypted (DVB-S, DVB-T
and DVB-C). Watching these channels and
the recording and playback functions are only
possible with the appropriate CI module and
a SmartCard. Ask your specialist dealer.
The range of channels available from the pub-
lic broadcasting institutions (ARD with EinsEx-
tra, EinsFestival or ZDF with ZDF Info and all
third party broadcasters) are not encrypted
and can be received without a SmartCard.
Grundig SCR system
7
Your TV supports SCR system (Satellite Channel
Router). If your antenna installation is equipped
with an Single Cable Distribution multiswitch,
all television sets which are connected on this
antenna can receive the television channels
stand-alone.
Important notes on
environmental protection
7
The following information will help you to save
resources – and money as well.
7
If you are not using your television set for
several days, you should pull out the mains
plug for environmental and safety reasons.
This way the television does not consume any
electricity.
7
If the device is equipped with a power switch,
switching it off using this switch will be suffi-
cient. The energy consumed by the television
set is reduced to virtually 0 W.
7
In standby mode, the television set uses very
little energy. However, it may be necessary
to leave the television set in standby mode
for certain functions (for example automatic
switch-on and switch-off and for timer func-
tions).
7
The television set uses less energy when the
brightness is reduced.
Notes on still images
Watching the same image for a long time on the
screen may cause a still image remains feebly on
the background. Feeble image(s) on the back-
ground is originated from LCD/LED technology
and does not require any action under guaran-
tee. To avoid such cases and/or minimize the
impact, you may observe the tips below.
7
Do not allow the same TV channel to stay on
the screen for a very long time. Channel logos
may cause this situation.
7
Do not allow the images, which are not full
screen, to constantly stay on the screen; if not
streamed in full screen format by the broad-
caster, you can convert the images to full
screen by changing picture formats.
7
Higher brightness and/or contrast values will
lead this impact to appear faster; therefore,
you are recommended to watch your TV in the
lowest brightness and contrast levels.
ENGLISH
8
CONNECTION AND PREPARATION
-----------------------------------------------
Connecting the antenna and power cord
1 To receive digital satellite channels (DVB-S),
connect the satellite antenna cable to the
antenna socket »SATELLITE« on the televi-
sion set.
And/or:
2a
To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop
or indoor antenna (passive or active indoor
antenna with its own power supply) to the an-
tenna socket »ANT IN« on the television set;
or
2b To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket »ANT IN« on the
television set;
or
2c To receive analogue TV channels, connect
the cable for the rooftop antenna to the an-
tenna socket »ANT IN« on the television set
Note:
7
When connecting an indoor antenna you
may have to try it out at different positions
until you get the best reception.
3 Plug the power cord into a wall socket.
Note:
7
Do not plug in the power cord of the device
until you have connected the external equip-
ment and the antenna.
7
Do not use an adapter plug or extension
lead which does not meet the applicable
safety standards. Do not tamper with the
power cord.
1
2
3
9
ENGLISH
Inserting batteries into the
remote control
CONNECTION AND PREPARATION
-----------------------------------------------
1 Open the battery compartment by removing
the lid.
2
Insert the batteries (2 x 1.5 V micro, for
example R03 or AAA). Observe the po
-
larity marked in the bottom of the battery
compartment.
3 Close the battery compartment.
Note:
7
If the television no longer reacts properly
to remote control commands, the batteries
may be flat. Always remove used batteries.
7
The manufacturer accepts no liability for
damage caused by leaking batteries.
Environmental note
7
This symbol on recharge-
able batteries/batteries or
on the packaging indicates
that the rechargeable bat-
tery/battery may not be disposed of with
regular household rubbish. For certain
rechargeable batteries/batteries, this sym-
bol may be supplemented by a chemical
symbol. Symbols for mercury (Hg) or lead
(Pb) are provided if the rechargeable batter-
ies/batteries contain more than 0.0005%
mercury or more than 0.004% lead.
Rechargeable batteries/batteries, including
those which do not contain heavy metal,
may not be disposed of with household
waste. Always dispose of used batteries
in accordance with local environmental
regulations. Make enquiries about the appli-
cable disposal regulations where you live.
ENGLISH
10
OVERVIEW
------------------------------------------------------------------------------------------------------------------------------------
Connections on the television set
AV1 / S-VHS SCART socket (CVBS signal,
RGB signal);
Video and sound socket for
S-Video camcorder.
COMPONENT
Y Pb Pr Sockets for video input
(YUV signal).
L R Sockets for audio input
(YUV signal).
Optic Out Socket for audio output
(optical) for PCM/Dolby
Digital signals.
For connecting digital AV
amplifiers or AV receivers.
AUDIO OUT L R Sockets for audio output.
Audio Socket for audio input for a
PC.
PC-IN VGA socket, video input for
PC.
SATELLITE Antenna socket for the
satellite antenna (DVB-S).
ANT IN Antenna socket for a DVB-T,
DVB-C and analogue antenna.
HDMI2 (ARC) HDMI socket,
audio/video input.
HDMI3 HDMI socket,
audio/video input.
11
ENGLISH
OVERVIEW
------------------------------------------------------------------------------------------------------------------------------------
HDMI4 HDMI socket,
audio/video input.
USB2 (HDD) USB socket for external
data media;
Grundig WiFi USB dongle
port.
LAN Network cable connection
socket.
U Headphone jack (3.5 mm
jack plug);
Sockets for audio output.
AV2
Video Video socket for
camcorder
L R Audio socket for
camcorder.
USB1 USB socket for external
data media without a power
supply of their own;
Grundig WiFi USB dongle
port.
HDMI1 HDMI socket,
audio/video input.
CI Common Interface Slot.
Controls on the television set
ON
OFF Power switch, switches the televi-
sion into standby mode and off.
8/I Switches the television on and
back into standby mode.
V– V+ Adjusts the volume;
selects menu functions.
MENU Opens the menu.
Select a menu option with
»P+« or »P–«.
Activate the function with
»V+«.
Confirm the function with
»V+« or »V–«.
Press »MENU« to quit the menu.
M Opens the pre-selection for
AV channels.
In the menu, press »P+« or »P–«
to select and press »
« to
confirm.
P– P+ Switches the television on from
standby;
selects channels in steps;
selects function in the menu.
ENGLISH
12
OVERVIEW
------------------------------------------------------------------------------------------------------------------------------------
The remote control – Main functions
Switches on and off
(Standby).
Opens menu for AV channels
and USB input.
Then select using »
V
«, »
<
«,
»
>
« or »
Λ
« and press
»OK«
to confirm.
Muting.
Zapping function;
switches back one menu
level in the menus.
Opens the main menu.
Opens the TOOLS menu.
Opens/closes the control
menu when playing a file in
DLNA menu.
Switches between
teletext and TV mode.
Opens the electronic
TV guide.
Switches on from standby;
Selects channel – in steps.
Adjusts the volume.
Navigation in the menus
Moves the cursor up
and down in the menus.
Moves the cursor to the left
and right in the menus.
Activates various functions
and save functions/settings.
Displays information.
Opens and close the Quick
Apps menu.
Opens the channel list.
Switches on from standby;
Selects channel – directly.
Selects the channel list
(»All«, »FAV 1« to »FAV 4«).
The GRUNDIG „Voice Remote“
As an alternative to the included remote control,
you can also operate your television with the
new GRUNDIG „Voice Remote“.
Your television is operated using simple voice
commands..
Additional information on the GRUNDIG Voice
Remote“ is available from your retailer.
13
ENGLISH
OVERVIEW
------------------------------------------------------------------------------------------------------------------------------------
The remote control –
All functions
(red)
Selects pages in teletext;

(green)
Selects/activates various functions

(yellow)
in the menus.

(blue)
5 Switches to double character size
in teletext;
Selects the previous title/previous
picture in the file browser.
6 Refreshes a teletext page;
Selects the next track/next picture
in the file browser.
3
Stops scrolling through pages in
teletext;
Starts a fast reverse search in the
file browser.
4
Reveals answers in teletext;
Starts a fast forward search in the
file browser.
Key has no function
8 Starts playing a programme from
an external data medium;
Starts playing in DLNA menu.
! Freeze frame;
Pauses the file being played in
DLNA menu.
7 Ends playback of a programme
from an external data medium;
Splits the screen in teletext;
Ends playing in DLNA menu.
Selects different audio languages
(only for digital television chan-
nels)
Selects different subtitles
(only for digital television chan-
nels)
Note:
7
Your TV supports remote control feature
for Apple iPhones and Android phones.
Depending on the features of your TV, you
may control your TV by your phone after
downloading the free »GRUNDIG TV
Remote« application from Apple App Store
or Google Play (Android Market) and install
it on the Apple iPhone/Android phone.
ENGLISH
14
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Initial set-up and tuning
television channels
The television set is equipped with automatic
channel search, which searches for satellite
channels (DVB-S), terrestrial channels (DVB-T),
cable channels (DVB-C) and analogue channels.
You start the search and the television channels
will be stored into the Program Table. Following,
you can sort the satellite channels (DVB-S) in the
Program Table.
The sorting of terrestrial channels (DVB-T), cable
channels (DVB-C) and analogue channels is only
possible in the favourite list
For DVB-S channels there are 6000 presets
available, for DVB-T and DVB-C channels 1000
presets, and 99 presets for analogue channels.
The various settings
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
7
Tunes digital television channels from the satel-
lite, from page 15.
You have two options for this search:
the basic installation which presets a stand-
ard selection, e.g. the satellite Astra 19.2°
East; you need only start the search;
the professional installation, which allows
you to make all required settings and set pa-
rameters for your receiver system.
7
Tunes digital terrestrial television channels, on
page 17.
7
Tunes digital television channels from the
cable provider, on page 17.
7
Tunes analogue television channels, in the
chapter “Special functions”, starting on
page 70.
7
Further settings for digital television chan-
nels after the initial set-up can also be found
in the chapter “Special Settings”, starting on
page 64.
Note:
7
Make the language and country selection for
all types, then continue reading the respective
chapter.
Selecting language, country and
operating mode
1 Switch on the television set from standby with
»
8«, »1…0« or »P+« or »P-«.
During initial set-up, the »Installation Guide«
will be displayed.
Help:
7
If this menu is not displayed, restore the
television set to its default settings (see
page 54).
2 Select the menu language with »
<
«, »
>
«,
»
V
« or »
Λ
« and press
»OK«
to confirm.
3 Select the mode with »
<
« or »
>
« and press
»OK«
to confirm.
The settings used in »Home Mode« help to
save energy.
Alternatively, the menu item »Shop Mode«
can be selected which the retailer can use
for demonstrating the device functions.
Note:
7
End the »Shop Mode« by restoring the televi-
sion set to its default settings (see page 54).
4 Select the country in which the television set
is operated with »
<
«, »
>
«, »
V
« or »
Λ
« and
press
»OK«
to confirm.
The »Source Setup« menu appears with the
»Connection Type« line marked.
Note:
7
You can find a description of how to tune
the television channel of your choice de-
pending on the antenna connected – in the
following chapters.
15
ENGLISH
Tuning the television channels
from satellite (DVB-S)
You have two options for tuning digital satellite
channels.
A The easy installation,
which pre-configures all antenna settings for
the satellite channels on Astra 19.2° East.
B The advanced installation
can be used if you wish to receive satellite
channels from various satellites. To do so,
you must make the antenna settings (Satel-
lite, LNB Power, LNB Type, DISEqC Mode,
LNB Selection) for the satellites chosen.
Easy installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with »
<
« or »
>
«.
2 Select the line »Easy Installation« with »
V
«
or »
Λ
« and press
»OK«
to confirm.
Other menu options will be displayed,
the satellite Astra 19.2° East is preset.
3 Start the scan with »

« (green).
The »Search results« menu appears, and
the scan for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
7
You can abort the scan by pressing
»MENU«.
Advanced installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with »
<
« or »
>
«.
2 Select the line »Advanced Installation« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The menu appears.
Satellite
ASTRA 19.2°,E
Transponder
11362 MHz H
LNB Power
Off
DISEqC Mode
Off
LNB Type
Universal
LNB Selection
Off
Auto Tuning
Quality
Signal strength
Poor Normal Good
Exit
Back
INSTALLATION
ANTENNA SETTINGS
Manual Tuning
08.08.2012
15:46
3 Select the line »Satellite« with »
V
« or »
Λ
«
and press
»OK«
to confirm.
The »SELECT SATELLITE« menu appears.
Select the satellites with »
V
«, »
Λ
«, »
<
« or
»
>
« and press
»OK«
to confirm.
Note:
7
The setting in the line »Transponder« is not
required for this automatic scan.
4 Select the line »LNB Power« with »
V
« or
»
Λ
«.
Depending on the type of LNB, set the LNB
power supply to »13/18 V« or »14/19 V«
with »
<
« or »
>
«.
5 Select the line »LNB Type« with »
V
« or »
Λ
«.
Select the type of LNB installed with »
<
«
or »
>
«.
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
ENGLISH
16
6 Select the line »DISEqC Mode« with »
V
«
or »
Λ
«.
Select »DiSEqC 1.0« or »DiSEqC 1. in
accordance with the existing antenna system
with »
<
« or »
>
«.
DiSEqC 1.0 allows up to four satellites to
be received simultaneously.
DiSEqC 1.1 allows up to 16 satellites to be
received simultaneously.
7 Select the line »LNB Selection« with »
V
« or
»
Λ
«.
Select the setting for the respective satellites
with »
<
« or »
>
«.
8 Once the settings for the satellite have been
made, switch to the »AUTOMATIC CHAN-
NEL SEARCH« menu with »« (red).
Select Satellite
Operator Selection
ASTRA 19.2°,E
Other
Service Type
All
Scan Mode
Free + Scramble
Network Search
Off
Connection Type
Satellite
Exit
Back
SOURCE SETUP
AUTOMATIC CHANNEL SEARCH
Start Search
08.08.2012
15:46
9 Select the line »Scan Mode« with »
V
«
or »
Λ
«.
Select the scan mode with »
<
« or »
>
«
(for unencrypted channels, for encrypted
channels only, or for both).
10 Select the line »Service Type« with »
V
«
or »
Λ
«.
Use »
<
« or »
>
« to select whether you want to
search for television channels only (TV), radio
stations only (Radio) or both (Radio + TV).
Note:
7
It is possible, that some TV channels (tran-
sponders) cannot be found. This is caused
by a change in satellite parameters made
by the broadcaster, e.g. new channels have
been added. Set the »Network Search« op-
tion to »On«.
11 Start the scan with »
« (red).
The »Results« menu appears, and the scan
for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
7
You can abort the scan by pressing
»MENU«.
12 Press »MENU« to end the setting.
Note:
7
If other television channels are to be tuned
from a second satellite, proceed as follows:
Open the menu with »MENU«, select the
line »SOURCE SETUP« with »
V
« or »
Λ
«
and press
»OK«
to confirm. Then select the
»Automatic Channel Search« with »
V
« or
»
Λ
« and press
»OK«
to confirm. Confirm
the line »Select Satellite« with
»OK«
and
select the preferred satellite with »
V
«, »
Λ
«,
»
<
« or »
>
«. Start the scan with »
« (red).
Continue the adjustment by step 7 of the
chapter.
Note:
7
Before recording HD channels, please
check signal quality and Strength, see
chapter "Displaying signal information" on
page 73. If the level is displayed in green,
you can record HD channels without any
problems.
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
17
ENGLISH
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Tuning terrestrial television
channels (DVB-T)
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Air« with
»
<
« or »
>
«.
2 Select the line »Scan Type« with »
V
« or
»
Λ
«.
Use »
<
« or »
>
« to set the required scan type:
»DTV«, scan for digital television channels;
»ATV«, scan for analogue television
channels;
»ATV & DTV«, scan for analogue and
digital television channels.
Caution:
7
The antenna power supply (5V ) may only
be switched on if the antenna is an active
indoor antenna with a signal amplifier and it
is not already supplied with a voltage via a
mains plug (or similar supply). Otherwise
you may cause a short circuit and irrepara-
bly damage your antenna.
3
Select the line »Active Antenna Power« with
»
V
« or »
Λ
«.
Switch on the antenna power supply for the
antenna with »
<
« or »
>
« (»On«).
4 Start the scan with »

« (green).
The »Search Results« menu appears, and
the search for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
7
You can abort the scan by pressing
»MENU«.
5 Press »MENU« to end the setting.
Note:
7
Before recording HD channels, please
check signal quality and Strength, see
chapter "Displaying signal information" on
page 73. If the level is displayed in green,
you can record HD channels without any
problems.
Tuning television channels from
the cable provider (DVB-C)
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Cable«
with »
<
« or »
>
«.
2 Select the line »Scan Type« with »
V
« or »
Λ
«.
Use »
<
« or »
>
« to set the required scan type:
»DTV«, scan for digital television channels;
»ATV«, scan for analogue television channels;
»ATV & DTV«, scan for analogue and
digital television channels.
3 Select the line »Cabel Scan Type« with »
V
«
or »
Λ
«. Select the preferred option (»Quick«
or »Full«) with »
<
« or »
>
«.
The search function »
Quick
« sets up the
channels according to the information pro
-
vided by your cable provider in the trans-
mission signal.
If the option »Full« is selected, the entire
frequency range will be scanned. The
search can take a long time with this op-
tion. This option is recommended if your
cable provider does not support the scan
type
»
Quick
«
.
Note:
7
You can accelerate the search. To do this,
you need information about the frequency
and
network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet.
4 Start the scan with »

« (green).
The »Search Results« menu appears, and
the search for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
7
You can abort the scan by pressing
»MENU«.
5 Press »MENU« to end the setting.
Note:
7
Before recording HD channels, please check
signal quality and Strength, see chapter
"Displaying signal information" on page 1
. If the level is displayed in green, you can
record HD channels without any problems.
ENGLISH
18
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Changing the program table for
the digital channels
Channels which are found using the scan are
saved in the »PROGRAM TABLE«.
You can delete channels which are not required
from the programe table, you can change the
order of channels within the programe table
(only satelite channels, DVB-S) and lock individ-
ual channels (Parental control).
You can also add channels to the favourites list;
in addition, you can change the order of chan-
nels within the favourites list.
With »

« (green) you can display the channels
which belong to one network.
Switch to the next page in the programe table
with »P+« and to the previous page with »P-«.
With »

« (yellow) you can open the »LIST
MANAGEMENT« within the programe table.
In this List Management you can create your
own favourites lists.
With »

« (blue) you can sort the channels ac-
cording different criteria.
Selecting channel lists
1 Open the menu with »MENU«.
2 Select the »SOURCE SETUP« menu with »
V
«
or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Programe Table« with »
V
«
or »
Λ
« and press
»OK«
to confirm.
The menu »PROGRAM TABLE« appears.
Important:
7
Programe table and favourites lists are
saved separately according to the different
input sources (satellite, cable, air).
7
When opening the program table, the respec-
tive channel list for the current input signal
appears.
Notes:
7
If in the program table appears added
to the name of the channel, you need a
CI module and a Smart-Card for watching
these channels.
7
As the received data channels are not dis-
played in the program table, number chan-
nels displayed in the program table may be
less than 6000.
1 Das Erste HD
DTV
6 EinsPlus
DTV
11 HD 1
DTV
16 TV Sport
DTV
2 ZDF HD
DTV
7 arte
DTV
12 Life
DTV
17 Sat.8
DTV
3 arte HD
DTV
8 Phoenix
DTV
13 Film
DTV
18 SKY
DTV
4 N24
DTV
9 Test-R
DTV
14 Promo
DTV
19 TV6
DTV
5 Einsfestival
DTV
10 ANIXE HD
DTV
15 Sport1
DTV
20 TV5
DTV
1 Das Erste HD
INSTALLATION
PROGRAM TABLE
Edit Add To Fav.Network Sort
Exit
Back
Network ALL
Select Favorite
Service ALL
MPEGHDDTV
ASTRA 19.2
°
19
ENGLISH
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Deleting channels
1
In the
»PROGRAM TABLE«
menu, select the
Edit mode by pressing
»
« (red)
.
2
Select the television channel to be deleted
with
»
V
«, »
Λ
«
,
»
<
« or »
>
«
and press
»

«
(
yellow
) to delete.
Note:
7
You can delete all channels with »

«
(blue).
3 Confirm the deletion process with »

«
(green);
or
cancel the deletion process with »
« (red);
4 Quit the program table with »MENU«.
Change the order of the channels in
the program table
(only satellite channels)
1
In the
»PROGRAM TABLE«
menu, select the
Edit mode by pressing
»
« (red)
.
2 Select the channel which should be moved
with »
V
«, »
Λ
«, »
<
« or »
>
« and mark it with
»
« (red).
3 Move the channel to its new position with
»
V
«, »
Λ
«, »
<
« or »
>
« and press
»OK«
to
confirm.
Note:
7
Repeat steps 2 and 3 if you would like to
change other channels.
4 Quit the program table with »MENU«.
Sorting channels in the program
table
(only satellite channels)
You can sort the order of the channels in the pro-
gram table according different criteria: in order
of Satellite, alphabetical or in order of encryp-
tied/free channels.
1
In the
»PROGRAM TABLE«
menu, select the
Sort mode by pressing
»

« (blue)
.
2 Select the sort criteria with »
« (red), »

«
(green)
or
»

« (yellow).
3 Quit the program table with »MENU«.
Skipping channels
You can mark television channels which should
be skipped when selecting with »
Λ
« or »
V
«.
It is still possible to select them using the number
buttons.
1 In the »PROGRAM TABLE« menu, switch
over to the list view with »

« (yellow).
2 Select the preferred channel with »
V
«
or »
Λ
«.
3 Select the column »Skip« with »
<
« or »
>
«
and use
»OK«
to mark the channel.
– The channel is marked by »«.
4 Quit the program table with »MENU«.
Note:
7
Channels can also be reactivated. Select the
channel with »
V
« or »
Λ
«, then select the
column »Skip« and reactivate the channel
with
»OK«
.
Creating lists of favourites
You can save your favourite channels in up to
four favourites lists (FAV 1 to FAV 4).
Notes:
7
Favourites lists must be created separately
for all input sources (satellite, cable, air).
7
You can select the favourites list by pressing
»
FAV
«.
1 In the »PROGRAM TABLE« menu, switch
over to the list view with »

« (yellow).
2 Select the channel of your choice with »
V
«
or »
Λ
«.
3 “Push” the channel into the favourites
lists 1 to 4 with »
<
« or »
>
« and press
»OK«
to confirm.
The position in the favourites list is marked
with »«.
You can enter the same channel in more
than one favourite list.
Each favourite list can store up to 250
channels.
ENGLISH
20
Notes:
7
Channels can also be deleted from the
favourites lists. Select
the
channel to be
deleted with »
V
«, »
Λ
«, »
<
« or »
>
«
and
press
»OK«
to delete it.
7
When deleting a channel from the favourites
list, the order within the favourites list will be
updated.
4 Quit the program table with »MENU«.
Sorting channels in the favourite list
You can change the order of channels in the
favourites list.
1 In the »PROGRAM TABLE« menu, select the
favourites list »1« to »4«.
2 Select the channel which should be moved
with »
V
«, »
Λ
«, »
<
« or »
>
« and mark it with
»
« (red).
3 Move the channel to its new position with
»
V
«, »
Λ
«, »
<
« or »
>
« and press
»OK«
to
confirm.
Notes:
7
Repeat steps 2 and 3 if you would like to
change other channels within the same
favourites list.
7
Repeat steps 1 to 3 if you would like to
change channels in a different favourites list.
4 Exit the current favourites list with »

«
(blue).
The entire programe table will appear
again.
5 Quit the program table with »MENU«.
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Enter own names for the favourites
lists (max. 6 characters)
You can enter own names for all favourites lists.
1 In the »PROGRAM TABLE« menu, switch over
to the list view with »
● ● ●
« (yellow).
2 Select the desired favourites list with »1« till
»4«.
The Favorite Name screen is displayed.
3 Delete the „old“ name (FAV1), for this
purpose select with »
V
«, »
Λ
«, »
<
« and
»
>
« the push button »
<
« and delete the
character with »OK«.
4 Select the required character/numeric with
»
V
«, »
Λ
«, »
<
« and »
>
« and confirm with
»OK«.
Repeat the procedure for further characters/
numerics.
Select »ABC« for uppercase and »abc«
for lower case and confirm with »OK«.
Select »?@123« for numbers and
symbols and confirm with »OK«.
5 Confirm the new name, select the push
button »Submit« with »
V
«, »
Λ
«, »
<
« or
»
>
« and confirm with »OK«.
6 Press »MENU« to end the seting.
21
ENGLISH
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Picture settings
1 Open the menu with »MENU«.
2 Select the menu item »PICTURE SETTINGS«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The »PICTURE SETTINGS« menu appears.
Picture Mode
User
Brightness
50
Sharpness
75
Colour Temperature
Medium
Contrast
100
Colour
65
Exit
Back
PICTURE SETTINGS
Advanced Tuning
Basic Tuning
20.09.2010
15:46
3 Select the line »Picture Mode«, »Bright-
ness«, »Contrast«, »Sharpness«, »Colour«, or
»Colour Temperature« with »
V
« or »
Λ
«.
Select the value with »
<
« or »
>
« and press
»OK«
to confirm.
Notes:
7
When changing the values with »
<
« or »
>
«,
the screen will be split. You can see the
current picture value on the left side, the
new setting on the right side.
7
In the »PICTURE SETTINGS« menu you can
also find other additional settings.
4 Select the line »DNR«, »Mpeg NR«, »Vibrant
Colour«, »Perfect Clear«, »Film Mode«,
»Gamma«, »Dynamic Contrast«, »Dynamic
Backlight«, »Backlight« or »MEMC« with
»
V
« or »
Λ
«.
Select the value with »
<
« or »
>
« and press
»OK«
to confirm.
Notes:
7
You can only select the »Mpeg NR« function
on digital and AV presets.
»Mpeg NR« reduces any interference
from artefacts (pixel blocks) from digital
programmes due to MPEG compression
(such as from DVB-T receivers or
DVD players).
7
The »Film Mode« detects and processes
feature films automatically for all channel
sources. This means you will always receive
an optimal picture.
This functions in the modi 480i, 576i and
1080i in TV playback and for other channel
sources.
If the »Film mode« is switched on for pro-
grammes without a feature film signal, minor
problems such as picture freeze, defective
subtitles or fine lines in the picture could
occur.
7
The function »Dynamic Contrast« adapts the
contrast dynamically and optimally for the
respective picture content.
7
With »Dynamic Backlight«, the device opti-
mally adapts the background lighting to the
picture content.
7
The »Backlight« can only be set manually
when the function »Dynamic Backlight« is
deactivated.
7
MEMC feature only appears in the menus of
the products with 400 Hz PPR feature.
5 Press »MENU« to end the setting.
ENGLISH
22
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Sound settings
1 Open the menu with »MENU«.
2 Select the menu item »SOUND SETTINGS«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOUND SETTINGS« menu appears.
Volume
10
Balance
Sound Mode
SRS SSHD
SRS Sound Preset
Night Mode
Headphone
Audio Output Setup
Sound Type
Stereo
Speech
Off
20
End
Back
SOUND SETTINGS
External
20.09.2010
15:46
Note:
7
Additional operations are explained in the
following sections.
Volume
1 Select the line »Volume« with »
V
« or »
Λ
«
and change the setting with »
<
« or »
>
«.
Balance
1 Select the line »Balance« with »
V
« or »
Λ
«
and change the setting with »
<
« or »
>
«.
Automatic volume
Television stations broadcast at different vol-
umes. The automatic volume limiting (AVL) func-
tion means the volume is kept the same when
you switch between channels.
1 Select the line »AVL« with »
V
« or »
Λ
« and
select the option »On« with »
<
« or »
>
«.
Note:
7
If the »SRS SSHD« setting has been selected
in the »Audio Mode« line, the AVL line can-
not be selected.
Stereo/two channel sound, mono
If the device receives two-channel-sound pro-
grammes, e.g. a film with the original soundtrack
on audio channel B (display: »Dual II«) and
the dubbed version on sound channel A (dis-
play: »Dual I«), you can select the audio channel
you prefer.
If the device receives stereo or Nicam pro-
grammes, it switches automatically to stereo
sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo
sound quality is poor.
1 Select the line »Audio Type« with »
V
« or
»
Λ
« and adjust the setting with »
<
« or »
>
«.
Night Mode
Night Mode prevents fluctuations and sudden
increases in volume.
1 Select the line »Night Mode« with »
V
« or
»
Λ
«.
2 Activate ( »On«) or deactivate the night
mode by pressing »
<
« or »
>
«.
Note:
7
»Night Mode« appears in menu if »SRS
SSHD« has been selected in »Sound
Mode«.
23
ENGLISH
Stereo width
This broadens the sound output for stereo pro-
grammes and improves the sound with mono
reception.
1 Select the line »Audio Mode« with »
V
«
or »
Λ
«.
2 Select the option »Spatial« with »
<
« or »
>
«.
Soundeffects
This menu offers three preset sound effects
(Music, Natural and Speech) and one setting to
be created by you (User).
1 Select the line »Sound Preset« with »
V
« or
»
Λ
«.
2 Select the sound effect »Music«, »Natural«
or »Speech« by pressing »
<
« or »
>
«.
Note:
7
»User« option is active when »Sound mode«
setting is selected as »Normal or »Spatial«.
SRS StudioSound HD
SRS StudioSound HD is a patented audio tech-
nology which is integrated into the television set
and only requires the built-in speakers to gener-
ate a Surround Sound effect.
1 Select the line »Sound Mode« with »
V
«
or »
Λ
«.
2 Select the option »SRS SSHD« with »
<
« or
»
>
«.
3 Select the line »SRS Sound Preset« with »
V
«
or »
Λ
«.
4 Select the sound effect »Music«, »Movie«,
»Natural« or »Speech« with »
<
« or »
>
«.
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Equalizer
Equalizer offers a sound setting ”User” that you
can create.
Equaliser appears in the menu when »Sound
mode« is selected as »Spatial« or »Normal«,
and »Sound Medium« as »User«.
1 Select »Equalizer« with »
V
« or »
Λ
« and
press
»OK«
to confirm.
The »EQUALIZER« menu appears.
Note:
7
If the »SRS SSHD« setting has been selected
in the »Sound Mode« line, the »Equalizer«
line will not indicate.
2 Select the frequency bandwidth »120Hz«
with »
V
« or »
Λ
«.
Set the preferred value with »
<
« or »
>
«.
3 Set the next frequency bandwidth with »
V
«
or »
Λ
« and repeat the setting.
4 Press »
<
« to save the setting.
Audio description (Audio subtitles)
Audio description is an additional audio channel
for visually-impaired persons. Descriptions are
provided of activities, surroundings, changes of
scene, gestures and actors' facial expressions.
This audio channel is transmitted simultaneously
with the normal sound on digital channels. Avail-
ability depends on the respective channel and
broadcaster.
1 Select the line »Audio Description« with »
V
«
or »
Λ
« and select the option »On« with »
<
«
or »
>
«.
2 Select the line »Volume« with »
V
« or »
Λ
«
and change the volume with »
<
« or »
>
«.
Exiting the setting
1 Press »MENU« to end the setting.
* Under licence from SRS Labs, Inc.
StudioSound
HD,
SRS and the
symbol are trademarks of
SRS Labs, Inc.
ENGLISH
24
TELEVISION - OPERATION
--------------------------------------------------------------------------------
Basic functions
Switching on and off
1 Switch the television to standby with the pow-
er switch »ON
OFF«.
2 Press »
8«, »1…0« or »P+« or »P-« to switch
on the television from standby mode.
3 Press »
8« to switch the television to standby.
Selecting channels
1 Press »1…0« to select presets directly.
2 Select channels step by step with »P+« or
»P-«.
3 Open the channel list with
»OK«
, select the
preferred television channel with »
V
«, »
Λ
«,
»
<
« or »
>
« and press
»OK«
to confirm.
Exit the channel list with »MENU«.
Selecting channels from lists
You can select channels from various lists (e.g.
all channels, FAV 1 to FAV 4).
1 Press »
FAV
« to open an overview of pro-
grame tables.
– The overview is displayed.
2 Select a channel list with »
Λ
« or »
V
« and
open it with
»OK«
.
3 Select a television channel with »
V
«, »
Λ
«,
»
<
« or »
>
« and press
»OK«
to confirm.
4 Press »MENU« to exit the channel list.
Selecting a preset AV channel
1 Open the »Select Source« menu with » «.
2 Select an AV preset with »
V
«, »
Λ
«, »
<
« or
»
>
« and press
»OK«
to confirm.
3 Use »1…0« to switch back to the television
channel.
Adjusting the volume
1 Adjust the volume with »
+
o
«.
Switching sound on/off
1
Press »
p
« to mute the sound or switch it
on again.
Displaying information
1 Display information, press »?« repeatedly.
The display disappears automatically after
a short while.
Freeze-frame
If you wish to view a particular scene for longer,
you can freeze” the frame of the current pro-
gramme.
1 Activate the freeze-frame function with »
$«.
2 End the freeze-frame function with »
$«.
Picture settings
Various picture settings are available.
1 Open the Tools menu with »TOOLS«.
2 Select the menu item »Picture Mode« with
»
V
« or »
Λ
«.
3 Select »User«, »Eco TV«, »Vivid«, »Natural«,
»Movie«, »Sports« or »Game« by pressing
»
<
« or »
>
«.
You can change the »User« picture setting;
see “Picture settings” on page 21.
Note:
7
Picture setting »Game« can only be selected
in »HDMI«, »Component« and »PC« modes.
25
ENGLISH
Audio settings
Various audio settings are available.
1 Open the Tools menu with »TOOLS«.
2 Select the menu item »Sound Preset« with
»
V
« or »
Λ
«.
3 Select the audio setting »User«, »Music«,
»Natural« or »Speech« by pressing »
<
« or
»
>
«.
You can change the »Useaudio setting
see the “Soundeffects” chapter on page
23.
Note:
7
»User« option is active when »Sound mode«
setting is selected as »Normal or »Spatial«.
Audio language
Various languages are available on digital tele-
vision channels. This depends on the programme
being broadcast.
1 Open the selection menu with »
«.
2 Select the language by pressing »
V
« or »
Λ
«
and press
»OK«
to confirm.
Subtitles
Various subtitles are available on digital televi-
sion channels. This depends on the programme
being broadcast.
1 Open the selection menu with »
«.
2 Select the subtitles with »
V
« or »
Λ
« and
press
»OK«
to confirm.
TELEVISION - OPERATION
--------------------------------------------------------------------------------
Zoom function
This function allows you to enlarge the picture
as required.
1 Open the Tools menu with »TOOLS«.
2 Select the menu item »Zoom« with »
V
« or
»
Λ
«.
3 Press »OK« repeatedly to enlarge the
display in three steps.
Eco mode
This function allows you to reduce the power
consumption.
1 Open the Tools menu with »TOOLS«.
2 Select the menu item »Eco Twith »
V
« or
»
Λ
«.
3 Switch on the Eco mode with »
<
« or »
>
«.
4 Switch the Eco mode off again with »
<
« or
»
>
«.
Entering the switch-off time
(sleep timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1 Open the Tools menu with »TOOLS«.
2 Select the line »Sleep Timer« with »
V
« or
»
Λ
«.
3 Enter the switch-off time with »
<
« or »
>
«.
Note:
7
To switch off the function, use »
<
« or »
>
« to
set the switch-off time to »Off«.
ENGLISH
26
TELEVISION - OPERATION
--------------------------------------------------------------------------------
Zapping function
This function remembers the channel you are
currently watching while you switch over to other
ones (zapping).
1 Press »1…0« or »P+«, »P–« to select the
channel to be stored in the zapping memory
and press »
<
« to confirm.
2 Press »1…0« or »
Λ
«, »
V
« to switch to
another television channel.
3 Press »
<
« to switch between the saved tel-
evision channel and the last television chan-
nel viewed.
4 End the function with »MENU«.
Electronic TV guide
The electronic TV guide provides an overview of
all programmes that will be broadcast in the next
week (for digital channels only).
1
Press
»GUIDE«
to display channel informa-
tion.
Notes:
7
Not all channels supply provide a detailed
TV guide.
7
Many broadcasters transmit the current
schedule, but do not offer detailed descrip-
tions.
7
There are broadcasters which do not pro-
vide any information at all.
2 Press »
V
« or »
Λ
« to select a television
channel.
Today's programmes on the television
channel selected are displayed.
3 Switch to the information about the current
programme with »
>
«.
Notes:
7
You can open and switch off the extensive
programme information with »?«.
7
You can can added the selected broadcast
to the memory timer by pressing
»OK«
.
4 Press »
V
« to select information on the next
programme and, »
Λ
« to return to the infor-
mation for the current programme.
5 Select programmes on over the coming days
with »

« (green), and switch back to the cur-
rent day with »
« (red).
6 Switch back to the channel selection with
»
<
«.
Note:
7
Filter for certain programmes with »

«
(blue), select the channel type with »
<
«,
»
>
«, »
V
« or »
Λ
« and press
»OK«
to con-
firm. Programmes which match the selected
channel type are displayed.
7 Quit the electronic TV guide with »MENU«.
27
ENGLISH
TELEVISION - OPERATION
--------------------------------------------------------------------------------
Changing the picture format
The television automatically switches to the 16:9
format if this format is detected via the SCART
socket.
1 Open the Tools menu with »TOOLS«.
2 Select the menu item »Picture Format« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
3 Select the picture format with »
<
« or »
>
« and
press
»OK«
to confirm.
You can choose between the following
picture formats:
»Auto« format
The picture format is automatically switched to
»16:9« for 16:9 programmes.
The picture format is automatically switched to
»4:3« for 4:3 programmes.
»16:9« and »14:9« formats
For programmes in 4:3 format, the picture is
stretched horizontally if the »16:9« format or
»14:9« format is selected.
The picture geometry is stretched horizontally.
With actual 16:9 input sources (from a set-
top box on the SCART socket) the picture fills
the screen completely and with the correct
geometry.
»4:3« format
The picture is shown in 4:3 format.
»LetterBox« format
The letterbox format is especially suitable for
programmes in 16:9 format.
The black borders which are usually at the top
and bottom of the screen are eliminated, 4:3 pic-
tures fill the screen.
The transmitted pictures are enlarged, but are
slightly cropped at the top and bottom. The pic-
ture geometry remains unchanged.
»Subtitle« format
If you cannot see the subtitles at the bottom of
the screen, select »Subtitle«.
»Panorama« format
This setting is suitable for films in an especially
wide format.
During programmes in 4:3 format, the picture is
stretched horizontally if the »Panorama« function
is selected. The picture geometry is stretched
horizontally.
»Overscan off« format
In this mode, HD pictures are not cropped by the
HDMI sockets or component sockets, and are
displayed in their original size. This only applies
in HDMI mode and for resolutions of 720p or
above.
ENGLISH
28
NETWORK INSTALLATION
-----------------------------------------------------------------------------
To use the functions "GRUNDIG AppLICA-
TION store" and "Operation with Digital Media
Server", you must connect the television to your
home network with internet access and log on.
When you have logged your television onto the
home network, it can also be operated remotely
from an Apple iPhone or Android smartphone.
The options available are dependent on the
functions offered by the television. To enable
this, you must download the free application
»GRUNDIG TV Remote« from the Apple App
Store or from Google Play (Android Market)
and install it on your Apple iPhone/Smartphone.
Network Connection
You can establish a wired or wireless connection
between your television and the local network.
If you want to use a wired network connection,
please start with the instructions on this page.
If you use a wireless network connection, please
follow the instructions in the „Wireless network
connection“ section on page 31.
Wired network
Wired network connection
1 Connect the output of external model to
»LAN« socket with Cat 5 cable.
Note:
7
Connection cables are not supplied.
29
ENGLISH
NETWORK INSTALLATION
-----------------------------------------------------------------------------
Wired network setting
There are two ways of making the wired network
settings.
A Automatic connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from modem automati-
cally.
B Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
Automatic connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP.
Modems and IP sharers that support DHCP ob-
tain the »IP Address«, »Netmask«, »Gateway«
and »DNS« values required for internet access
automatically, and thus you are not required to
enter those values manually.
1 Open the menu with »MENU«.
2 Select menu item »INTER@CTIVE T with
»
V
« or »
Λ
« and press »OK« to confirm.
»INTER@CTIVE TV« menu is layed.
Inter@ctive Applications
Connection Type
CABLE
DNS
Netmask
Gateway
MAC address
10.134.150.8
255.255.255.0
10.134.151.254
E1:DF:BF:92:00:11
IP Address
10.134.151.15
E
XIT
B
ACK
INTER@CTIVE TV
N
ETWORK
S
ETTINGS
08.08.2012
15:42
Connect
Connection test
OK
Network Settings
AUTO
3 Select the line »Connection Type« with »
V
«
or »
Λ
« and select »Wired« with »
<
«, »
>
«.
4 Select »Network Configuration« with »
V
« or
»
Λ
« and select »Auto« with »
<
«, »
>
«.
5 Select »Connect« with »
« (red) to establish
the modem connection.
»Connecting ... Please wait« message will
be displayed.
6 Press »

« (green) to make sure that the
network connection is established with the
current settings.
»Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
7 Press »MENU« to end the setting.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
ENGLISH
30
NETWORK INSTALLATION
-----------------------------------------------------------------------------
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way « and »DNS« values manually. You can ob-
tain your »IP Address«, »Netmask«, »Gateway«
and »DNS« values from your Internet Service
Provider (ISP).
1 Open the menu with »MENU«.
2 Select menu item »INTER@CTIVE T with
»
V
« or »
Λ
« and press »OK« to confirm.
»INTER@CTIVE TV« menu is displayed.
3 Select the line »Connection Type« with »
V
«
or »
Λ
« and select »Wired« with »
<
«, »
>
«.
4 Select the line »Network Configuration« with
»
V
« or»
Λ
« and select »Manual« with »
<
«,
»
>
«.
»IP Address«, »DNS«, »Netmask« and
»Gateway« and options are active.
Inter@ctive Applications
DNS
Netmask
Gateway
MAC Address
10.134.150.8
255.255.255.0
10.134.151.254
E1:DF:BF:92:00:11
Connection Type
Cable
IP Address
10.134.151.15
Exit
Back
INTER@CTIVE TV
Network Settings
dd.mm.yyyy
hh:mm
Connect
Connection test
OK
Network Settings
Manual
5 Select the line »IP Address« with »
V
« and
press »OK« to confirm.
Enter the IP address with »1…0« and press
»

« (green) to save the value.
6 Select the line »DNS« with »
V
« and press
»OK« to confirm.
Enter the DNS address with »1…0« and
press »

« (green) to save the value.
7 Select the line »Netmask« with »
V
« and
press »OK« to confirm.
Enter the Netmask address with »1…0« and
press »

« (green) to save the value.
8 Select the line »Gateway« with »
V
« and
press »OK« to confirm.
Enter the Gateway address with »1…0« and
press »

« (green) to save the value.
9 Select »Connect« with »
« (red) to establish
the modem connection
»Connecting ... Please wait« message will
be displayed
10 Press »

« (green) to make sure that the
network connection is established with the
current settings.
»Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
11 Press »MENU« to end the setting.
31
ENGLISH
NETWORK INSTALLATION
-----------------------------------------------------------------------------
Wireless network connection
1 Connect Grundig WiFi USB dongle to the
»USB1« or »USB2 (HDD)« socket of your
television in order to connect the television
to a wireless network.
Note:
7
Grundig Wireless USB WiFi Adaptor is not
supplied with the product but sold separate-
ly. Please contact your dealer from where
you have purchased your TV to obtain more
information about purchasing.
Notes:
7
Wireless LAN adaptor supports IEEE
802.11B/G and N communication protocols.
We recommend you to use IEEE 802.11N
protocol to obtain the best performance in
HD video playback.
7
If you use a modem that supports IEEE
802.11B/G, video playback performance
may be poor when compared to a modem that
supports IEEE 802.11N since the data transfer
rate of IEEE 802.11B/G protocol is lower.
7
Please note that video playback
performance in a DLNA application on a
wireless local network and in a Smart Inter@
ctive TV 2.0 application on a network with
internet connection depends on the number
of users on the network as it is the case in
every wireless network.
7
It is recommended to switch off the equipment
that are not in use in home network in order
to avoid unnecessary network traffic.
7
Placing the modem or wireless network
sharer on an elevated location will increase
the wireless connection reception strength.
7
Wireless connection reception strength may
vary depending on the type of the modem
and the distance between the modem and
television.
7
Modem must be transmitting its SSID in order
to establish a wireless connection. Television
can not connect to a network without SSID.
Wireless network settings
There are two ways of making the wireless net-
work settings.
A Automatic connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from modem automati-
cally.
B Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
ENGLISH
32
NETWORK INSTALLATION
-----------------------------------------------------------------------------
Automatic connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatically,
and thus you are not required to enter those val-
ues manually.
1 Open the menu with »MENU«.
2 Select menu item »INTER@CTIVE T with
»
V
« or »
Λ
« and press »OK« to confirm.
»INTER@CTIVE TV« menu is displayed.
3 Select the line »Connection Type« with »
V
«
or »
Λ
« and select »Wireless« with »
<
«, »
>
«.
4 Select »Network Configuration« with »
V
« or
»
Λ
« and select the option »Auto« with »
<
«,
»
>
«.
Inter@ctive Applications
Connection Type
Wireless
DNS
Netmask
Gateway
Select Access Point
10.134.150.8
255.255.255.0
10.134.151.254
N/A
IP Address
10.134.151.15
Exit
Back
INTER@CTIVE TV
Network Settings
dd.mm.yyyy
hh:mm
Connect
Connection test
OK
Network Settings
Auto
5 Select the line »Select Access Point« with
»
V
« or »
Λ
« and press »OK« to confirm.
»Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu.
6 Select the network that you want to connect
with »
V
«, »
Λ
«, »
<
« or »
>
« and press »OK«
to confirm.
Wireless connection password screen is
displayed.
7 Select the required character with »
V
«, »
Λ
«,
»
<
« or »
>
« and move to the next character
with »OK«.
Select »ABC« for uppercase and »abc«
for lowercase and press »OK« to confirm.
Select »?@123« or numbers and symbols
and press »OK« to confirm.
Select »
« to delete the character
entered and press »OK« to confirm.
Enter the password and use »
V
«, »
Λ
«,
»
<
« or »
>
« to select » Submit« and press
»OK« to confirm.
Notes:
7
In WEP encryption system, more than one
network password can be assigned to the
network. Your television can connect the
network only with the password in level one.
7
For TV to discover the wireless modem on
the network, the network name should
support ASCII characters.
8 Select »Connect« with »
« (red) to establish
the modem connection.
»Connecting ... Please wait« message will
be displayed.
9 Press »

« (green) to make sure that the
network connection is established with the
current settings.
»Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
10 Press »MENU« to end the setting.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
33
ENGLISH
NETWORK INSTALLATION
-----------------------------------------------------------------------------
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can ob-
tain your »IP Address«, »Netmask«, »Gateway«
and »DNS« values from your Internet Service
Provider (ISP).
1 Open the menu with »MENU«.
2 Select menu item »INTER@CTIVE TV« with
»
V
« or »
Λ
« and press »OK« to confirm.
»INTER@CTIVE TV« menu is displayed.
3 Select the line »Connection Type« with
»»
V
« or »
Λ
« and select »Wireless« with
»
<
«, »
>
«.
4 Select the line »Select Access Point« with
»
V
« or »
Λ
« and press »OK« to confirm.
»Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu.
5 Select the network that you want to connect
with »
V
«, »
Λ
«, »
<
« or »
>
« and press »OK«
to confirm.
Wireless connection password screen is
displayed.
6 Select the required character with »
V
«,
»
Λ
«, »
<
« or »
>
« and move to the next
character with »OK«.
Select »ABC« for uppercase and »abc«
for lowercase and press »OK« to confirm.
Select »?@123« or numbers and symbols
and press »OK« to confirm.
Select »
« to delete the character
entered and press »OK« to confirm.
Enter the password and use »
V
«, »
Λ
«,
»
<
« or »
>
« to select » Submit« and press
»OK« to confirm.
Notes:
7
In WEP encryption system, more than one
network password can be assigned to the
network. Your television can connect the
network only with the password in level one.
7
For TV to discover the wireless modem on
the network, the network name should
support ASCII characters.
7 Select the line »Network Configuration«
with »
V
« or »
Λ
« and select the option
»Manual« with »
<
«, »
>
«.
»IP Address«, »DNS«, »Netmask« and
»Gateway« and options are active.
8 Select the line »IP Address« with »
V
« and
press »OK« to confirm.
»Enter the IP address with »1…0« and press
»

« (green) to save the value.
9 Select the line »DNS« with »
V
« and press
»OK« to confirm.
»Enter the DNS address with »1…0« and
press »

« (green) to save the value.
10 Select the line »Netmask« with »
V
« and
press »OK« to confirm.
»Enter the Netmask address with »1…0«
and press »

« (green) to save the value.
11 Select the line »Gateway« with »
V
« and
press »OK« to confirm.
»Enter the Gateway address with 1…0 and
press »

« (green) to save the value.
12 Select »Connect« with »
« (red) to establish
the modem connection.
»Connecting ... Please wait« message will
be displayed.
13 Press »

« (green) to make sure that the
network connection is established with the
current settings.
»Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages and MAC address will be
displayed.
14 Press »MENU« to end the setting.
ENGLISH
34
SMART INTER@ACTIVE TV 2.0 FUNCTION
-------------------------
Smart Inter@active TV 2.0
Applikationen
Smart Inter@ctive TV 2.0 provides your televi-
sion with Internet applications when connected
to Internet.
Through Smart Inter@ctive TV feature you can
run many local and global Internet applications.
GRUNDIG AppLICATION store is a depot
where you can find various applications that you
may use on your Grundig TV. You can down-
load many applications from GRUNDIG AppLI-
CATION store. These applications include audio
and video conferencing, video, picture and
music applications, social networks, news and
sports, weather applications and doctor or phar-
macy search, recipes and viewing traffic conges-
tions depending on your local city. Also you can
make a call via the Internet.
Notes:
7
Availability of Smart Inter@ctive TV
2.0 inter@ctive applications may vary
depending on the country.
7
Smart Inter@ctive TV 2.0 cannot download
and save files, cannot upload files to a web
site and cannot install add-ins except Login
pages of some applications for applications
other than the ones in GRUNDIG
AppLICATION store.
7
Under no circumstances, Grundig is not
responsible for the content and the quality
of content offered by the content providers.
7
Local and global internet applications
provided through your Smart Inter@ctive TV
2.0 comes with your TV within the framework
of special limited duration agreements
entered into with the application owners.
Application owners may update, modify,
restrict or entirely remove those applications
with their own decision. Grundig cannot be
held responsible for such changes.
7
Grundig reserves the right to make all
changes such as modifications, restrictions,
extensions, transfers and removals on
internet applications provided through your
Smart Inter@ctive TV 2.0.
7
In Login process of some applications,
it may be required to connect to the web
page of the related application. Subject
web pages may contain links not related to
Login process. When connecting those links,
TV may access open web and view contents
that are not supported by your TV. As you
are on open web, your TV cannot control
those unsupported contents or cannot be
held responsible for them.
Open the »SMART INTER@CTIVE TV«
menu
1 Open the menu with »MENU«.
2 Select menu item »INTER@CTIVE TV« with
»
V
« or »
Λ
« and press »OK« to confirm.
»INTER@CTIVE TV« menu is displayed.
3 Select the line »Inter@ctive Applications« with
»
V
« or »
Λ
« and press »OK« to confirm.
»Inter@ctive Applications« menu will be
displayed. During initial login, registration
screen for GRUNDIG AppLICATION store
will be displayed.
Notes:
7
If you press »@« when no menu is open, you
can access »Quick Apps« menu.
7
If you attempt to start Inter@ctive applications
without wire or wireless adapter connected,
the related warning is displayed on the
screen.
If your wire or wireless adaptor is connected
but you cannot receive IP or internet is not
connected, the Inter@ctive applications
cannot be started.
In this case, check Network connection
settings. See page 28 or 31.
7
You can find information on how to navigate
in the menus and how to create an account
on GRUNDIG AppLICATION store in the
next chapters.
35
ENGLISH
SMART INTER@ACTIVE TV 2.0 FUNCTION
-------------------------
Navigation and text input during regis-
tration
1 Open the menu »Inter@ctive Applications«
with »@«.
The registration screen for GRUNDIG
AppLICATION store will be displayed.
SKIP LOGIN REGISTER
Welcome to
You need to register in order to use smart
.apps fully functional
2 Start registration with »OK«.
3 Select the required text field with »
V
«, »
Λ
«,
»
<
« or »
>
« and confirm with »OK«.
The virtual keyboard is shown.
Notes on data entry:
7
Select the required key assignment
(language) for the keyboard with »

«
(green).
7
The data is entered with the virtual keyboard.
Select the required letters/numbers with
and confirm with »OK«.
7
To switch from upper case to lower case,
select the »Shift« button and confirm with
»OK«.
7
A »mobile keyboard« can be displayed with
»
« (red).
7
With »

« (green) the language/key
assignment of the keyboard can be
changed.
7
The last character/number can be deleted
with »

« (blue). The complete entry can
be deleted with »

« (yellow).
7
If the input is complete for the line, it must be
»sent«. Use »
V
«, »
Λ
«, »
<
« or »
>
« to select
the button »
<
« and confirm with »OK«.
The keyboard is hidden.
Creating a GRUNDIG SMART APPS
account
If you are using the function »GRUNDIG appLI-
CATION store« for the first time, you should set
up personal access. By registering you receive
varied information on the Grundig applications.
1 Open the menu »Inter@ctive Applications«
with »@«.
The registration screen for GRUNDIG
AppLICATION store will be displayed.
2 Start registration with »OK«.
3 Enter the last and first name:
Select the text field with »
V
«, »
Λ
«, »
<
« and
»
>
« and confirm with »OK«. Enter the data
and then use »
V
«, »
Λ
«, »
<
« and »
>
« to
select button »
<
« and confirm with »OK«.
Switch to the next input line in the same
„tab“ with »
V
« and display the keyboard
with»OK«.
Switch to the next „tab“ with »

« (blue)
and display the keyboard with »OK«.
Note:
7
You can switch to the previous „tab“ with
»
« (red).
4 Enter the e-mail address:
Enter the data, after entry use »
V
«, »
Λ
«,
»
<
« and »
>
« to select the button »
<
« and
confirm with »OK«.
Switch to the next „tab“ with»

« (blue)
and display the keyboard with »OK«.
5 Enter the password and confirm the
password:
Enter the data, after entry use »
V
«, »
Λ
«,
»
<
« and »
>
« to select the button »
<
« and
confirm with »OK«.
Switch to the next input line in the same
„tab“ with »V« and display the keyboard
with»OK«.
Switch to the next „tab“ with»

« (blue)
and display the keyboard with »OK«.
ENGLISH
36
SMART INTER@ACTIVE TV 2.0 FUNCTION
-------------------------
6 Enter the location:
Enter the data, after entry use »
V
«, »
Λ
«,
»
<
« and »
>
« to select the button »
<
« and
confirm with »OK«.
The message »You are ....« is displayed,
registration was successful.
7 Enter the telephone number (optional):
Enter the data, after entry use »
V
«, »
Λ
«,
»
<
« and »
>
« to select the button »
<
« and
confirm with »OK«.
8 Confirm the entry with »

« (blue).
9 Read the Conditions of Use and accept with
»OK«.
The »GRUNDIG appLICATION store«
menu is displayed and the standard
applications are loaded.
Log on to GRUNDIG AppLICATION
store
If you reset the television to factory settings and
have not set the „check mark“ in the field »Save
installed applications« during reset, all installed
applications will be deleted.
When the »GRUNDIG appLICATION stor
menu is selected, the „Log on menu“ is dis-
played. Please enter your e-mail address and
password.
1 Call the »GRUNDIG appLICATION store«
menu with »@«.
The Log on menu is displayed.
2 Start Login with »

« (blue).
3 Enter the e-mail address:
Enter the data and close the keyboard with
»
<
«.
Select the next line with »
V
«.
4 Enter the password:
Enter the data and close the keyboard with
»
<
«.
Note:
7
If you have forgotten the password, press
»

« (yellow). A new password is sent
to your e-mail address within a short time.
Enter this password.
5 Confirm the entry with »

« (blue).
6 Read the Conditions of Use and accept with
»OK«.
An information is displayed. You
can choose, if you want restore your
applications or if you want download the
default applications.
7 Select the desired line with »
V
« or »
Λ
« and
confirm with »OK«.
The »GRUNDIG appLICATION store«
menu is displayed and the standard
applications are loaded.
8 After a short time, an information message is
displayed, confirm it with »OK«.
37
ENGLISH
Selecting applications
1 Select the »Quick Apps« menu with »@«.
2 Press »
« (red) button to enter the
»GRUNDIG appLICATION store« menu.
Online Store
My Apps
All Apps
Social
Video
News
Life
User
dd.mm.yyyy hh:mm
HELP AREA
3 Select application categories with »
V
« or
»
Λ
« and press »
>
« to enter application
field.
4 Select the required application with »
V
«,
»
Λ
«, »
<
« or »
>
« and press »OK« to
confirm.
Main menu of the application will be
displayed after a short while.
Notes:
7
If you attempt to start Inter@ctive applications
without wire or wireless adapter connected,
the related warning is displayed on the
screen.
7
If your wire or wireless adaptor is connected
but you cannot receive IP or internet is not
connected, the Inter@ctive applications
cannot be started. In this case, check
Network connection settings. See page 28
or 31.
GRUNDIG Online Store
GRUNDIG online store is an online depot where
you can download many applications that you
may use on your TV.
In the »GRUNDIG appLICATION store« menu,
some applications are installed at the factory.
The GRUNDIG online store includes a large
selection of other applications which you can
download.
1 Select the »Quick Apps« menu with »@«.
2 Press »

« (green) to enter the »GRUNDIG
Online store«.
Home Search Register
Online Applications
All Apps
Social
Video
News
Life
Health
Fun
Search
User
dd.mm.yyyy hh:mm
HELP AREA
Most Popular
1
Highest Rated
2
Release Date
3
Note:
7
Press »
« (red) to exit the »GRUNDIG
Online Store«.
Downloading and installing
internet applications
1 Select the desired category in GRUNDIG
online store with »
V
« or »
Λ
« and press »
>
«
to enter application field;
or
select the application you want with the
numbered buttons
– »1« – »Most Popular«,
– »2« – »Highest Rated«,
– »3« – »Release Date«;
or
to search for a specific application, press
»

« (green) and use the virtual keyboard to
enter a search term.
SMART INTER@ACTIVE TV 2.0 FUNCTION
-------------------------
ENGLISH
38
2 Select the application you want to
download with »
V
«, »
Λ
«, »
<
« and »
>
«
and press »OK« to confirm.
Information on the application will be
displayed.
3 Press »

« (blue) to download and install
the application.
Application will be downloaded and
installed.
Notes:
7
You can start the application by pressing
»

« (blue) button.
7
Continue to download applications by
pressing »
« (red) button.
Uninstalling internet applications
1 Select the desired category in »GRUNDIG
appLICATION store« with »
V
«, »
Λ
«, »
<
«
and »
>
« to enter application field.
2 Select the application you want to uninstall
with »
V
«, »
Λ
«, »
<
« and »
>
« and press »
«
(red) to confirm.
A safety indication is displayed.
3 Confirm the opertion with »OK«;
or
cancel the operation with »
<
«.
4 Press »OK« to end the operation.
Sorting the internet applications
You can change the order of the applications in-
stalled on your TV as you like.
1 Select the desired category in »GRUNDIG
AppLICATION store« with »
V
« or »
Λ
« and
press »
>
« to enter application field.
Note:
7
Applications can only sorted in »All
Applications« category.
2 Select the application you want to move
with »
V
«, »
Λ
«, »
<
« and »
>
« and press
»

« (blue) to confirm.
3 Press »
V
«, »
Λ
«, »
<
« and »
>
« to move the
applications to its new position and press
»OK« to confirm.
SMART INTER@ACTIVE TV 2.0 FUNCTION
-------------------------
Note:
7
Perform steps 2 and 3 again to move other
applications.
Rating internet applications
You can rate applications installed on your TV
individually.
1 Select the desired category in »GRUNDIG
AppLICATION store« with »
V
« or »
Λ
« and
press »
>
« to enter application field.
2 Select the application you want to rate with
»
V
«, »
Λ
«, »
<
« and »
>
« and press »

«
(yellow) to confirm.
3 Select the application rating with »
V
«, »
Λ
«,
»
<
« and »
>
« and press »OK« to save;
or
press »
<
« to cancel rating.
Application view mode
For various applications you can see the live
broadcast while using the application.
1 Press »@« after starting the application.
»Application View Mode« menu will be
displayed.
2 Select the desired View mode with »
<
«
or »
>
« (options: »Full Screen Mode«,
»Widget Mode«, »Notification Mode«, »My
Applications« or »Close«) and press »OK«
to confirm.
Note:
7
This feature is not supported in all applications.
39
ENGLISH
Navigating in the main menu
1 Select the desired category with »
V
« or
»
Λ
« and press »
>
« to enter application
field.
2 Select the required application with »
V
«,
»
Λ
«, »
<
« and »
>
« and press »OK« to
confirm.
The Main menu of the application will be
displayed after a short while.
3 The use of the application mainly depends
on the structure of the application itself.
Follow the notes on the screen.
Playing and other options in the
applications
Note:
7
Some applications do not support all
playing options, and playing options may
vary among different applications.
1 »
8« starts playing in the applications.
2 »
!« pauses playing in the applications.
3 »
7« stops playing in the applications.
4 During playback, press »
3
« or »
4
« to
search pictures.
5 During playback, press »
5« or »6« to skip
forward/backward.
6 »
V
«, »
Λ
«, »
<
« and »
>
« allows sliding of
the navigation keys in the applications and
virtual keyboard.
7 Press »OK« to confirm the selections in
virtual keyboard and applications.
8 Press »1…0«, »
« (red), »▯▯« (green), »▯▯▯«
(yellow), »
▯▯▯▯« (blue) to select/enable
various functions in the applications.
9 »@« closes the menu »GRUNDIG
appLICATION store«.
SMART INTER@ACTIVE TV 2.0 FUNCTION
-------------------------
Browser main menu
1 Application gallery.
2 Applications.
3 Kategorie der
Applikationen.
4 Switch to the
Application Store.
Online Store
My Apps
All Apps
Social
Video
News
Life
User
dd.mm.yyyy hh:mm
12
3
4
HELP AREA
ENGLISH
40
MULTI MEDIA SERVER MODE
---------------------------------------------------------------------
Playing the video, music and
image files with home network
connection
With DLNA menu of your television, you can
easily access Video, music and photo files on
server; and thanks to DMR feature, you can au-
tomatically start and stop media playing on de-
vices with DMC feature.
Notes:
7
You can share your video, music and image
files through devices such as PC, mobile
phone or NAS (Network Attached Storage)
that function as DMS (Digital Media Server)
compatible with DLNA.
7
If the DMS device and the TV are connected
to the wireless network at the same time,
there may be lags and freezings during
video playback.
7
TV can also operate with DMS software
that can be installed on a computer but,
it is not guaranteed that it will run in full
compatibility with software without a DMS
certificate.
7
Perform the following steps for a sample
DMS set up.
Open Windows Media Player11’i on a
computer with Windows operating system.
In »Librar tab, select »Media Sharing«,
tick on the »Share my media« box on the
window that appears and then select »OK«.
The new window displays the IP numbers
of connected devices. To enable the TV
to detect the computer, you need to select
the television‘s IP number. If IP is not listed
in the window; from »Media Sharing«
menu‘s »Settings« option, you can select the
option »Allow new devices and computers
automatically« in the pop-up menu. After
completing these processes, the television
can only view the supported file formats in
the Library.
In order not to encounter any problems with
media sharing, check the firewall settings of
your modem and computer.
Selecting the Digital Media Server
1 Open the »Select Source« menu with » «.
2 Select »DLNA« with »V«, »Λ«, »<« or »>«
and confirm with »OK«.
»DLNA« menu is displayed.
Device Found 0
Page: 1/1
.Press BLUE key to search DMS device
3 Press »▯▯▯▯« (blue) to discover DMS devices
on home network.
DMS devices that are discovered appears
in the menu.
Note:
7
If no DMS device appears, check the
network connection. See page 28 or 31.
4 You can select the DMS device you want
with »
V
«, »
Λ
«, »
<
« or »
>
« and see its
content with »OK«.
The content appears.
Notes:
7
File and folder structure of the DMS device
in menu may vary depending on the Digital
Media Server software in use.
7
Subtitles are not supported on video files
that are played through the DMS device.
7
Video files played through DMS device
support following formats that have
obtained DLNA certificate: »MPEG_PS_
NTSC«, »MPEG_PS_PAL«, »MPEG_TS_
SD_EU« and »MPEG_TS_EU_ISO«.
7
In videos with high bit rate, lag problem
might be seen.
7
Folders that appear as unknown in DLNA
application cannot be played by the TV.
Installing the codec to your computer can
solve this problem.
41
ENGLISH
MULTI MEDIA SERVER MODE
---------------------------------------------------------------------
7
Audio files played through DMS device
support following formats that have obtained
DLNA certificate: »AAC_ADTS_320«,
»LPCM«, »MP3«, »WMABASE« and
»WMAFULL«.
7
Image files played through DMS device
support following formats that have
obtained DLNA certificate: »JPEG_LRG«,
»JPEG_MED« and »JPEG_SM«.
Start playback
1 Select the content folder on DMS device
with »
V
«, »
Λ
«, »
<
« or »
>
« and confirm with
»OK«.
All titles are displayed.
2 Select the desired title with »
V
«, »
Λ
«, »
<
«
or »
>
«.
3 Press »
8« to start playback.
Other playback options
1 Press »!« to pause playback.
2 Press »
8« to resume playback.
3 Press »
5« or »6« until you reach the
desired file.
4 Press »
7« to stop playback.
5 Pss »
<
« to return to the DMS list page.
6 Press »GUIDE« to exit the DLNA function.
Note:
7
Also, you can select following playing
functions from the menu:
»TXT« opens/closes the playing functions
menu;
»
8« starts playing;
»
!« pauses playing;
»
7« stops playing;
»
3
« or »
4
« searches pictures;
»
« selects replay;
»
« selects playing list;
« displays the information for the title
being played.
ENGLISH
42
USB OPERATION
---------------------------------------------------------------------------------------------------------------
File formats
Your television can work with the following file
formats using the USB sockets:
Video data
Special codecs for video compression and
decompression provide more memory space
without compromising the picture quality exces-
sively.
Your television plays video files in the formats
DIVS, XVID, H.264/MPEG-4 AVC (L4.1, 4 ref-
erence pictures), MPEG-4, MPEG-2, MPEG-1,
MJPEG and MOV.
The following file name extensions are also sup-
ported: AVI, MKV, MP4, TS, MOV, MPG, DAT,
VOB. These files can also contain audio files
compressed using MP3, AAC or Dolby Digital.
Audio data
Your television can play audio data in the for-
mats MP3, AAC.
MP3 is the abbreviation for MPEG-1 Level 3 and
is based on the MPEG-1 standard, which was
developed by the MPEG (Motion Picture Expert
Group).
AAC stands for Advanced Audio Coding and
was also developed by MPEG. AAC provides
better sound quality at an identical data rate.
WMA (Windows Media Audio) is a compres-
sion standard for audio data developed by
Microsoft.
These formats allow audio files to be recorded
and played which sound as good as a CD, while
taking up only a fraction of the memory space.
File name extensions which are supported: MP3,
MP2, WMA, M4A, AAC.
MP3 files can be organised into folders and
subfolders, as on the computer.
Image data
Your television can display pictures in the formats
JPEG, PNG and BMP.
JPEG stands for Joint Picture Experts Group.
It denotes a process for compressing picture files.
PNG and BMP are process used to save image
data with no, or very little, losses.
Picture files can be stored with other types of files
on one medium.
These files can be organised into folders and
subfolders.
43
ENGLISH
USB OPERATION
---------------------------------------------------------------------------------------------------------------
Connecting external data media
Before connecting the external data medium it is
recommended to switch the television to stand-by
mode.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
Notes:
7
The »USB1« socket of the television set
supplies a maximum power of 500 mA in
accordance with USB specifications. Exter-
nal hard disks which require more power
may therefore only be connected to the
»USB2 (HDD)« of the television set.
7
If you use a network cable for external hard
disks which are connected to the »USB2
(HDD)« socket on the television, this net-
work cable must also be disconnected from
the power supply when the television is
switched off.
7
External data media may not be disconnect-
ed from the television set while files on the
data medium are being accessed.
7
A bi-directional data transfer as defined for
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
7
USB transfer is not in itself an operating
mode. It is only an additional function.
1 Press »8«, »1…0« or »P+« or »P-« to switch
on the television from standby mode.
2 Connect the »USB2 (HDD)« socket of the
television and the corresponding socket on
the data device (external hard drive, digital
camera, card reader or MP3 player) using a
USB cable;
or
insert the USB plug of the USB memory stick
into the »USB1« socket of the television set.
Removing the external data
media
Before removing the external data medium, log
off the data medium.
1 Open the menu with »MENU«.
2 Select the menu item »USB RECORDING«
with »
V
« or »
Λ
« and press »OK« to
confirm.
3 Select the line »Safely Remove Disk« with
»
V
« or »
Λ
« and press »OK« to confirm.
Note:
7
The data medium can now be removed from
the socket.
ENGLISH
44
USB OPERATION
---------------------------------------------------------------------------------------------------------------
The file browser
The file browser displays video, audio and
picture files stored on external data media.
If an external data medium contains files in
different formats, you can, when necessary, filter
out the formats not required.
Main menu of the file browser
1 Selected data format.
2 Name of the data medium.
3 Total number of folders on the data medium.
4 Preview of the selected file.
5 Information on the external data medium.
6 Menu navigation.
Settings in the USB setup menu
Selecting the menu
1 Press » «, use »
V
«, »
Λ
«, »
<
« or »
>
« to
select the preset »USB« and press
»OK«
to
confirm.
2 Open the menu with »MENU«.
3 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE
SETUP
« menu appears.
Note:
7
Additional functions are explained in the
following sections.
Switching on automatic preview
If this function is switched on, a preview of the
selected file then appears in the file browser.
1 Select the line »Auto Preview« with »
V
«
or »
Λ
«.
2 Switch on the function with »
<
« or »
>
« (»On«).
3 Press »MENU« to end the setting.
Selecting the display mode
1 Select »View Mode« with »
V
« or »
Λ
«.
2 Select the preferred option with »
<
« or »
>
«.
3 Press »MENU« to end the setting.
Setting the display duration for
pictures in a slideshow
1
Select »Slide Show Interval« with
»
V
«
or
»
Λ
«
.
2 Select the display duration (3, 5, 10 seconds)
with »
<
« or »
>
«.
3 Press »MENU« to end the setting.
USB DRIVE %3
Used (MB) 475
Total (MB) 45
VIDEO FILES
Use Control
Buttons
x1
Speed
All
Repeat
Now
Total
ROOT
Photo
Music
Film
1
3
26 5
4
45
ENGLISH
DivX
®
VOD
You must have your device registered in order to
play the protected video that you will buy from
DivX
®
.
1 Select »DivX
®
VOD« with »
V
« or »
Λ
« and
confirm with
»OK«
.
– Registration Code appears.
2 Visit “http://vod.divx.com” and register the
device with the registration code.
3 Press »MENU« to end the setting.
DivX Certified
®
to play DivX
®
and DivX
Plus™ HD (H.264/MKV) video up to
1080p HD including premium content.
ABOUT DIVX VIDEO: DivX
®
is a digital video format created
by DivX, Inc. This is an official DivX Certified
®
device that plays
DivX video. Visit divx.com for more information and software
tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
®
de-
vice must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code,
locate the DivX VOD section in your device USB setup menu.
Go to vod.divx.com for more information on how to complete
your registration.
USB OPERATION
---------------------------------------------------------------------------------------------------------------
Basic playback functions
1 Select the data medium by pressing » «,
use »
V
«, »
Λ
«, »
<
« or »
>
« to select the option
»USB« and press
»OK«
to confirm.
The file browser appears.
2 Select the file format (video files, audio files,
picture files) with »
V
« or »
Λ
«.
3 Switch to the folder/file list with
»OK«
.
Note:
7
USB data medium with several partitions is
connected to the USB sockets, the letter for
the respective drive (e.g. C) appears behind
the folder symbol. Select the letter of the
drive with »
V
« or »
Λ
« and press
»OK«
to
confirm.
4 Select the folder or file with »
V
« or »
Λ
« and
press
»OK«
to open it.
A list of subdirectories appears.
Note:
7
Switch back to the main folder with »
<
«.
5 Select the track or picture with »
V
« or »
Λ
«
and press »
8« to start playing.
Notes:
7
You can view information on the film data by
pressing »?«.
7
When playing MP3 or WMA data,
information on the album, track and singer
is displayed at the left of the menu.
7
When playing picture files, you can use »?«
to display information about the resolution
and size.
7
When playing picture data, press »
?
« twice
to enter the DivX
®
Settings menu.
7
When playing picture data, the file browser
switches off. Press »
7
« to display the file
browser again.
6 Press »
!« to pause playback.
7 Press »
8« to resume normal playback.
8 Press »
7
« to end playback.
The file browser appears.
ENGLISH
46
USB OPERATION
---------------------------------------------------------------------------------------------------------------
Notes:
7
Use »
Λ
« to select »Up Folder«, when you
would like to return to the last folder. Use
»Root« (and then press
»OK«
) to return to
the main folder.
7
It is possible that files which are actually
supported do not function correctly in USB
mode. This is because certain files are not
recorded with standardised compression
processes, although they feature the “right”
file ending.
7
If a video file features several audio tracks
(audio streams), you can switch these over
during playback in full screen mode with
»
«.
7
When playing music files, you can use other
options in the USB mode at the same time.
This way, you can, for example, enhance a
slideshow with music.
7
For films, only subtitles in the .SRT,
.ASS, .SSA, .SMI format are sup-
ported. The names of the subtitle and
film files must be identical. Otherwise,
no subtitles will be shown.
Additional playback functions
Depending on the file format, the following
additional functions are available:
Selecting chapters on DivX
®
files
(only video files)
1 During playback, select the next chapter
with »
>
«.
2 During playback, select the previous
chapter with »
<
«.
Note:
7
You can also select chapters by entering the
chapter number with »1...0«.
Selecting titles on DivX
®
files
(only video files)
1 During playback, select the next title with
»
Λ
«.
2 During playback, select the previous title
with »
V
«.
Playing selected titles
Only the marked tracks are played.
1 Select the titles with »
V
« or »
Λ
« and press
»OK«
to mark it.
2 Select the next title with »
V
« or »
Λ
« and
press
»OK«
to mark it.
3 Start playback with »
8«.
4 Press »
7
« to end playback.
Note:
7
To remove the marking, select the title with
»
V
« or »
Λ
« and press
»OK«
to remove the
marking.
47
ENGLISH
Selecting a track or picture in steps
(SKIP)
1 During playback, select the next track/
picture with »
6«.
2 During playback, select the previous track/
picture with »
5«.
Playback begins with the track or picture
you selected.
Selecting a certain passage for
playback
(video files only)
1 During playback, press
»OK«
.
2 Enter the passage (time) with »1 ... 0« and
press »

« (green) or
»OK«
to confirm.
Fast forward
(for video and audio files only)
You can select different speeds (2-fold, 4-fold,
8-fold,16-fold and 32-fold forwards and back-
wards).
1 Select the playback speed during playback
with »
3
« or »
4
«.
2 Press »
8« to resume normal playback.
Rotating pictures
(picture files only)
You can rotate pictures by 90°.
1 During playback, press »
<
« or
>
« to rotate
the pictures by 90°.
USB OPERATION
---------------------------------------------------------------------------------------------------------------
Repeat functions
Options:
»One Repeat«: the current track will be
repeated.
»All Repeat«: all tracks will be repeated.
1 Switch off the repeat function before play-
back with »TOOLS«.
2 Start playback with »
8«.
3 Deactivate the repeat function with
»TOOLS«.
The display changes to »None Repeat«.
ENGLISH
48
Note:
7
If you only want to use this “normal” video text,
disable the digital video text, see page 74.
TOP text or FLOF text mode
1 Press »TXT« to switch on teletext.
2 Select teletext pages directly with »1...0«
or step by step with »
V
« and »
Λ
«.
Return to teletext page 100 with »?«.
Note:
7
At the bottom of the screen there is an info
bar with red, green and depending on the
channel yellow and blue panels. Similarly,
the remote control also features buttons with
different colours with which these pages can
be selected.
3 Go back a page with »
« (red).
4 Go to the next page with »

« (green).
5
Select a particular chapter with
»

«
(yellow)
.
6 Select a particular subject with »

« (blue).
7 Quit teletext with »TXT«.
Normal text mode
1 Press »TXT« to switch on teletext.
2
Press »1…0« to select teletext pages directly.
Return to teletext page 100 with »?«.
3 Go back a page with »
V
«.
4 Go to the next page with »
Λ
«.
5 Quit teletext with »TXT«.
Additional functions
Skipping the waiting time
While a page search is progressing, you can
switch to the TV programme.
1 Enter the teletext page number with »1…0«
and then press »
6«.
As soon as the page is found, the page
number is displayed.
2 Press »
6« to switch to the teletext page.
Enlarging the character height
If you have difficulty reading the text on the
screen, you can increase the character height.
1 To enlarge the character height of a teletext
page, keep pressing »
5«.
Page hold
A multiple page may contain several sub-pages,
which are automatically scrolled by the broad-
casting station.
1 Stop the automatic scrolling of the sub-pages
with »
3
«.
2 Quit the function with »
3
«.
Opening a sub-page directly
If the selected teletext page contains additional
pages, the number of the current sub-page and
the total number of pages are displayed.
1 Press »
« to open the sub-page function.
2 Use »
<
« or »
>
« to select the sub-page.
3 Quit the function with »
«.
Revealing answers
Certain teletext pages contain hidden answers
or information.
1 Display information with »
4
«.
2 Press »
4
« to conceal the information.
Split screen
This functions allows you to display the televi-
sion channel on the left side, the teletext on the
right side.
1 Switch the function on with »7«.
The television channel and teletext are dis-
played next to each other.
2 Switch the function off with »
7«.
TELETEXT OPERATION
----------------------------------------------------------------------------------------------
49
ENGLISH
INTERACTIVE PORTAL (HBBTV)
--------------------------------------------------------------
What is HbbTV?
To put it simply, HbbTV provides next-generation
interactive teletext with modern structured con-
tent, high-definition pictures and video sequenc-
es, and interactivity.
To receive HbbTV, the television must be con-
nected to the internet.
ARD is currently offering this new service with its
"third programmes", as is ZDF.
HbbTV Operation
When you switch to a TV programme that sup-
ports HbbTV, an information message is dis-
played if HbbTV is available.
1 Switch on HbbTV with »
« (red).
Information about the service is displayed
on the screen. In addition, the coloured
keys required for navigation are also dis-
played.
Note:
7
The range of subject areas and the selection
of the individual subject areas is dependent
on the each programme provider.
7
The number buttons »1« to »0« are used for
additional functions.
2 Select your required subject area with »

«
(green), »

« (yellow) or »

« (blue).
The ARD offering includes, for example, a de-
tailed programme overview, the full offering of
"Das Erste
1
Mediathek" as well as graphical re-
structured teletext with high-definition pictures.
The ZDF offering includes the "ZDF mediathek"
and other programme information (as of jull
2012).
The HBBTV Service is only available in some
countries.
3 In your selected subject area, choose the re-
quired option using »
V
«, »
Λ
«
,
»
<
« or »
>
«
and confirm with
»OK«
.
4 Switch on HbbTV with »
« (red).
Note:
7
If the navigation in HbbTV operation does
not work, you can finnish this function. Se-
lect in the »TOOLS« menu the option »Exit
HBBTV« and press
»OK«
to confirm
Additional functions for video
sequences
1
Start playback with
»8«
.
2
Pause playback with »!«.
3 Continue playback with »8«.
4
Rewind with »
3
« or forward with »
4
«.
5 Stop playback with »
7
«.
Ausblenden
Hilfe
Programm Mediathek VideotextAusblenden
0
1
Neueste Clips
nachtmagazin
aus:Nachtmagazin
Sendungen A - Z ?Sendung verpasst
Impressum
4
Alle Mediatheken
3
Das Erste Mediathek
l 15:11 Uhr 08.08.2012
5 / 5 A Heute 08.08.2012
ABC
5
Alina Tagesschau 01:43
ARD-Ratgeber: Geld
ARD-Ratgeber: Auto + Verkehr Tagesschau 14:00
ARD-Ratgeber: Heim + Garten
ARD-Ratgeber: Reise
ARD-Mittagsmagazin Tagesschau 04:47
ARD-Ratgeber: Gesundheit
ARD-Ratgeber: Bauen + Wohnen Tagesschau 14:10
ARD-Ratgeber: Recht
ARD-Sondersendung
06.08.12
.min 18
ENGLISH
50
CONVENIENCE FUNCTIONS
------------------------------------------------------------------------
Opening the SETTINGS menu
1 Open the menu with »MENU«.
2 Select the menu item »SETTINGS« menu with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SETTINGS« menu appears.
Menu
English
Subtitle
English
Date & Time
Audio
English
Subtitle Mode
Off
Time Adjustment
Time Zone
Auto
GMT +1
Exit
Back
SETTINGS
Date and time settings
Language settings
20.09.2010
15:46
Note:
7
Additional operations are explained in the
following sections.
Language settings
Changing the menu language
1 Select the line »Menu« with »
V
« or »
Λ
« and
press
»OK«
to confirm.
The »Select Menu Language« menu
appears.
2 Select the menu language with »
<
«, »
>
«,
»
V
« or »
Λ
« and press
»OK«
to confirm.
3 Press »MENU« to finish the setting.
Changing the audio language
(only for digital television channels)
You can define a primary and a secondary
audio language.
1 Select the line »Audio« with »
V
« or »
Λ
« and
press
»OK«
to confirm.
The »Select Audio Language« menu
appears.
2 Select the audio language with »
<
«, »
>
«,
»
V
« or »
Λ
« and then use »
« (red) to set
it as the primary audio language, or use
»

« (green) to set it as the secondary audio
language.
The primary and secondary language is
display at the top right in the menu.
3 Press »MENU« to end the setting.
Changing the subtitle language
and subtitle mode
(only for digital television channels)
You can switch the subtitles on and off, select the
subtitle language and allocate a second subtitle
language.
1 Select the line »Subtitle« with »
V
« or »
Λ
«
and press
»OK«
to confirm.
The »Select Subtitle Language« menu ap-
pears.
2 Select the subtitle language with »
V
«,
»
Λ
«, »
<
« or »
>
«, then use »
« (red) to set
it as the primary subtitle language, or use
»

« (green) to set it as the secondary subti-
tle language.
The primary and secondary language is
displayed at the top right in the menu.
3 To go back one menu level, press »
<
«.
4 Select the line »Subtitle Mode« with »
V
« or
»
Λ
« and then set the preferred option »Off«,
»Hard of Hearing« or »Basic« with »
<
« or
»
>
«.
5 Press »MENU« to end the setting.
51
ENGLISH
CONVENIENCE FUNCTIONS
------------------------------------------------------------------------
Setting the date and time
Automatic setting
Your television set detects the difference in time to
Greenwich Mean Time (GMT) automatically, as
long as the channel selected transmits a time signal.
1 Select the line »Date & Time« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
2 Select the line »Auto« with »
V
« or »
Λ
« and
press
»OK«
to confirm.
Date and Time will be updated automatically;
or
3 Select the input box with »
V
« or »
Λ
«, enter
the data for Date and Time with »1...0«
and press
»OK«
to confirm.
Manual setting
You can also set the difference in time manually
for example, when the correct time is not de-
tected automatically or does not correspond to
local time for other reasons
1 Select the line »Time Adjustment« with »
V
«,
then select the option »Manual« with »
<
«
or »
>
«.
The lines »Time Zone« and »Daylight Sav-
ing« are active.
2 Select the line »Time Zone« with »
V
« and
press
»OK«
to confirm.
The »Select Time Zone« menu appears.
3 Select the appropriate time zone with »
<
«,
»
>
«, »
V
« or »
Λ
« and press
»OK«
to con-
firm.
4 Select the line »Daylight Saving« with »
V
«
and use »
<
« or »
>
« to set the option »Auto«,
»Off« or »On«.
5 Press »MENU« to finish the setting.
Note:
7
If the option »Auto« is selected in the line
»Time Adjustment«, the television set auto-
matically adapts the time to the time signal
from the respective broadcaster. However,
different channels may also use time bases
which are different to those of your country;
e.g. foreign broadcasters. In these cases,
reminders and planned recordings may be
annulled due to the time difference.
Timer functions
Entering the switch-off time
(sleep timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1 Select the line »Sleep Timer« with »
V
« or
»
Λ
«.
2 Enter the switch-off time with »
<
« or »
>
«.
Note:
7
To switch off the function, use »
<
« or »
>
« to
set the switch-off time to »Off«.
3 Press »MENU« to end the set-up.
Switch-on timer
In the »Auto On« menu you can enter a switch-on
time for the television. After the preset time has
elapsed, the television switches on from standby
– at the preselected volume and the preselected
television channel.
1 Select the line »
Auto On
« with
»
V
« or »
Λ
«
and press
»OK«
to confirm
.
2 Select the line »Mode« with
»
V
« or »
Λ
«
and
use
»
<
« or »
>
«
to select when the television
should switch on.
3 Select the line »Input Source« with
»
V
« or »
Λ
«
and use
»
<
« or »
>
«
to select the input source.
4 Select the line »Service Type« with
»
V
« or »
Λ
«
and use
»
<
« or »
>
«
to select the preferred op-
tion (ATV, DTV, Radio or DATA).
5 Select the line »Channel« with
»
V
« or »
Λ
«
and use
»
<
« or »
>
«
to select the preferred
channel.
Note:
7
The line
»Channel« is only active when the in-
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
ENGLISH
52
6 Select the line »Volume« with
»
V
« or »
Λ
«
and
use
»
<
« or »
>
«
to set the volume.
7 Select the line »Set Hour« with
»
V
« or »
Λ
«
and enter the time with »1…0«.
8 Save the data with »

« (green).
Note:
7
You can abort the entry by pressing
»
« (red)
.
9 Press »MENU« to end the setting.
Switch-off timer
In the »Auto Off« menu, you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1 Select the line
»Auto Of
with
»
V
« or »
Λ
«
and press
»OK«
to confirm
.
2 Select the line »Mode« with
»
V
« or »
Λ
«
and
use
»
<
« or »
>
«
to set the preferred mode.
3 Select the line »Set Hour« with
»
V
« or »
Λ
«
and enter the time with »1…0«.
4 Save the data with »

« (green).
Note:
7
You can abort the entry by pressing »
«
(red).
5 Press »MENU« to end the setting.
Automatic switch-off (Auto Sleep)
If this function is activated, the television switches
automatically to standby after 5 minutes if no
video signal is broadcast or in accordance with
the according to European regulations, the tel-
evision switches automatically to standby after 4
hours provided that none of the buttons on the
remote control or on the television is operated
during this period.
1 Select the line »Auto Sleep« with »
V
« or
»
Λ
«.
2 Enter the switch-off time with »
<
« or »
>
«.
Note:
7
To switch off the function, use »
<
« or »
>
« to
select the setting »Off«.
3 Press »MENU« to end the setting.
CONVENIENCE FUNCTIONS
------------------------------------------------------------------------
Parental control settings
Authorising programmes
There are films which may be wholly or partially
unsuitable for children.
These programmes contain information which
marks the content or scenes with access levels of
4 to 18. You can select one of the access levels,
thereby authorising playback.
1 Select the line »Parental Guidance« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
2 Enter the PIN code »1234« with »1 ... 0«.
3 Select the access level with »
<
« or »
>
«.
4 Press »MENU« to end the setting.
Note:
7
When the TV is in review buffer mode, the
parental rating of the program in the live
broadcast is applied on the content being
watched (rather than the actual parental
rating of the content being watched). As
a result, a parental rated content being
watched in the review buffer mode will not
necessarily show as parental rated and
vice versa. This means that if parental rated
program starts in live broadcast the PIN-pop
up message will appear in review buffer, or
the PIN-pop up message will be dismissed in
review buffer as soon as a program without
parental rating starts in live broadcast.
Locking menus
This function allows you to lock the »Automatic
Channel Search«, »Digital Manual Tuning«, »An-
alogue Manual Tuning« and »Program Table«
menus so that they can be only accessed by
entering a PIN code.
1 Select »Menu Lock« with »
V
« or »
Λ
«.
2 Enter the PIN code »1234« with »1 ... 0«.
3 Activate the lock with »
<
« or »
>
« (»On«).
Note:
7
To switch off the menu lock, use »
<
« or »
>
«
to select the setting (»Off«).
4 Press »MENU« to end the setting.
53
ENGLISH
CONVENIENCE FUNCTIONS
------------------------------------------------------------------------
Locking keys (Parental lock)
When the key lock is activated, the buttons on
the television set do not function.
1 Select the line »Keypad Locwith »
V
« or
»
Λ
«.
2 Enter the PIN code »1234« with »1 ... 0«.
3 Activate (On) or deactivate (Off) the key lock
with »
<
« or »
>
«.
4 Press »MENU« to end the setting.
Changing the PIN code
You can also enter a personal PIN code instead
of the default code »1234«. Please take note of
your own PIN code.
1 Select »Set PIN« with »
V
« or »
Λ
« and press
»OK«
to confirm.
2
Enter the current PIN code 1 2 3 4 with
»1 ... 0«.
3
Enter your new four digit PIN code with
»1 ... 0«.
4
Enter your new four digit PIN code with
»1 ... 0« again.
5 Press »MENU« to end the setting.
Locking television channels
You can lock individual television channels, for
example channels unsuitable for children, using
a personal PIN code.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
3 Select the line »Program Table« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
The »PROGRAM TABLE« menu is dis-
played.
4 In the »PROGRAM TABLE« menu, switch
over to the list view with »

« (yellow).
5 Select the channel to be locked with »
V
«
or »
Λ
«.
6 Select the column »Lock« with »
<
« or »
>
«
and press
»OK«
to lock the channel.
7 Enter the PIN code »1234« with »1 ... 0«.
– The channel is marked using »«.
Note:
7
To remove the lock, select the channel again
with »
V
« or »
Λ
«, press
»OK«
to confirm
and then enter the PIN code 1 2 3 4 using
»1 ... 0«.
8 Press »MENU« to end the setting.
Watching a blocked television
channel
You can watch a TV channel blocked with PIN
code by selecting the TV channel and entering
the PIN code.
1 Select the blocked channel with »1…0« or
»P+«, »P–«.
2 Open the menu with »MENU«.
3 Select the menu item »SETTINGS« with »
V
«
or »
Λ
« and press »OK« to confirm.
4 Select the line »Open Channel Lock« with
»
V
« or »
Λ
« and press »OK« to confirm.
5 Enter PIN code »1234« with »1 ... 0«
buttons on the displayed password screen.
Blocked channel can be viewed.
Note:
7
Channel will be blocked again when you
change the channel.
ENGLISH
54
Power LED Brightness
You can adjust the stand-by LED. In stand by
mode, the LED is always flashing with reduced
brightness.
1 In the »SETTINGS« menu, select the line
»Power LED Brightness« with »
V
« or »
Λ
«.
2 Use »
<
« or »
>
« to select options »High« or
»Low«.
3 Press »MENU« to end the setting.
Updating software (OAD)
(from satellite, for digital channels only)
1 In the »SETTINGS« menu, select the line
»Check For Updates« with »
V
« or »
Λ
« and
press
»OK«
to confirm.
2 Select the column »OAD« with »
<
« or »
>
«
and press »OK« to confirm.
A search for new software will be made
and – if available – it will be installed.
Note:
7
If a search for software updates should be
made automatically, select the line »Auto-
matic OAD Update« with »
V
« or »
Λ
« and
use »
<
« or »
>
« to select the option »On«.
The software will be updated automati-
cally as far as possible.
2 Press »MENU« to end the setting.
CONVENIENCE FUNCTIONS
------------------------------------------------------------------------
Updating software (Online)
(from the internet, for digital channels only)
1 In the »SETTINGS« menu, select the line
»Check For Updates« with »
V
« or »
Λ
« and
press
»OK«
to confirm.
2 Select the column »Internet« with »
<
« or »
>
«
and press »OK« to confirm.
A search for new software will be made
and – if available – it will be installed.
Note:
7
If a search for software updates should be
made automatically, select the line »Auto-
matic Online Update« with »
V
« or »
Λ
« and
use »
<
« or »
>
« to select the option »On«.
The software will be updated automati-
cally as far as possible.
2 Press »MENU« to end the setting.
Restoring the television to the
default settings
This function allows you to delete the channel
lists and all custom settings.
1 In the »SETTINGS« menu, select the line
»Restore Factory Defaults« with »
V
« or »
Λ
«
and press
»OK«
to confirm.
2 Press »

« (green) to confirm the warning
message.
The »Source Setup« menu appears.
3 Continue the settings with the chapter “Initial
set-up and tuning television channels” on
page 14.
55
ENGLISH
DIGI LINK
Your television is equipped with
the DIGI LINK function.
This function uses the CEC
(Consumer Electronics Control)
protocol.
CEC allows external devices which are connect-
ed to the »HDMI« sockets by an HDMI cable
(e.g. DVD player) to be operated with a remote
control.
Prerequisite is that the devices connected support
CEC. Read the operating manual for the external
device to find out how to activate the correspond-
ing function.
The DIGI LINK functions on your
television
Switching on the television
automatically from standby
If the external device (e.g. Blu-ray player) is
switched on, the television also switches on and
the appropriate HDMI preset is selected auto-
matically.
Depending on the features of the external de-
vice, the external device (e.g. AV receiver) can
be switched on alone, the television stays in
standby.
Automatic selection of the HDMI
preset on the television
If your television is switched on and you then
switch on the external device (e.g. DVD player),
the appropriate HDMI preset on the television
will be selected.
Selecting the menu language
The television menu language is automatically
selected on the external device (e.g. DVD player).
The external device must support this function.
Switching off the external device
automatically
If you switch your television to standby, the ex-
ternal device (if it is switched on) will also be
switched to standby.
DIGI LINK is always active on your television set.
OPERATION USING EXTERNAL DEVICES
-----------------------------
Searching for and activating
external devices
You can connect up to 11 devices with DIGI LINK
functions to your television.
1 Open the Tools menu with »TOOLS«.
2 Select the menu item »CEC« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
The »HDMI CEC Device List« appears.
2 Start the device search with »
« (red).
The devices found are displayed in the
menu.
3 Select the device for operation with »
V
«,
»
Λ
«, »
<
« or »
>
« and press
»OK«
to mark it.
If the selected device is connected to a
different input to the current one, a switch
to the respective input will occur auto-
matically.
4 Press »MENU« to end the setting.
ENGLISH
56
OPERATION USING EXTERNAL DEVICES
-----------------------------
Device operation
You can decide whether external devices should
react to your television's remote control.
1 Press »
«, use »
V
«, »
Λ
«, »
<
« or »
>
« to
select the preset »HDMI1« to »HDMI4« and
press
»OK«
to confirm.
2 Open the menu with »MENU«.
3 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
4 Select the line »Remote Control« with »
V
«
or »
Λ
«.
5 Select the type of operation (»RC
Passthrough«, »Deck« or »Tuner« with »
<
« or
»
>
«.
Notes:
7
»RC Passthrough« can be used for all devices.
»Deck« and »Tuner« can be selected in ac-
cordance with the external device which
has been connected.
7
Try out which type of remote control opera-
tion the external device reacts to the best.
7
Read about the scope of functions of the
DIGILINK-compatible device in the respec-
tive operating manual.
6 Press »MENU« to end the setting.
Switching the device to standby
This option switches the external device to
standby.
1 Press »
«, use »
V
«, »
Λ
«, »
<
« or »
>
« to
select the preset »HDMI1« to »HDMI4« and
press
»OK«
to confirm.
2 Open the menu with »MENU«.
3 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
4 Select »Device Standb with »
V
« or »
Λ
«
and press
»OK«
to confirm.
– The external device switches itself off.
Source
HDMI1
Device Selection
GRUNDIG DVD
Remote Control
RC Passthrough
Device Standby
Exit
Back
SOURCE SETUP
DIGILINK
20.09.2010
15:46
57
ENGLISH
OPERATION USING EXTERNAL DEVICES
-----------------------------
High definition HD ready
Connect the corre-
sponding input sources
(e.g. HDTV receiver or
HD-DVD player) to the
»HDMI« sockets (for
digital HDTV sources).
This ensures that you can view digital HDTV
programmes, even if they are copy-protected
(HDCP High Bandwidth Digital Content Protec-
tion), without encountering problems.
Connection options
7
Which television socket(s) you connect your
external devices to depends on the sockets
the external device is equipped with and the
signals which are available.
7
Please note: With many external devices,
the resolution of the video signal must be
adjusted to the input sockets of the television
(see the operating manual of the external
device). You can find out which values you
need to set by referring to the guidelines in
the sections about the various connection
options.
7
Do not connect any other equipment while
the device is switched on. Also switch off the
other equipment before connecting it.
7
Do not plug in the power cord of the device
until you have connected the external equip-
ment and the antenna.
ENGLISH
58
Connecting external devices
... with digital audio/video signals
7
Suitable devices: Digital satellite receivers,
Playstation, BluRay player, DVD player/
recorder, set-top box, notebook, PCs.
7
Video signal: Digital video; resolution: stand-
ard 576p; HDTV 720p, 1080i, 1080p.
7
Audio signal: digital audio (stereo, multi-chan-
nel compression, uncompressed).
7
Presets »HDMI 1«, »HDMI 2«, »HDMI 3« or
»HDMI4«.
1
Connect the »HDMI1«, »
HDMI2 (ARC)
«,
» HDMI3« or »HDMI4« socket on the televi
-
sion and the corresponding HDMI socket on
the external device using a standard HDMI
cable (digital video and audio signal).
... with analogue video signal
(progressive)
7
Suitable devices: DVD recorders/players,
games consoles.
7
Video signal: YUV; resolution: standard 576p;
HDTV 720p, 1080i, 1080p.
7
Audio signal: stereo, analogue.
7
»Component« preset.
1 Connect the »COMPONENT Y Pb Pr«
sockets on the television to the correspond-
ing sockets of the external device with RCA
cables (video signal).
2 Connect the »COMPONENT L R« sockets
on the television to the corresponding sock-
ets of the external device with RCA cables
(audio signal).
OPERATION USING EXTERNAL DEVICES
-----------------------------
... using the SCART socket
(CVBS/RGB signal)
7
Suitable devices: Digital satellite receiver,
DVD player/recorder, set-top box, games con-
sole, video recorder, decoder.
7
Video signal: CVBS/RGB.
7
Audio signal: stereo, analogue.
7
»AV1« preset.
1 Connect the »AV1/S-VHS« socket on the
television and the corresponding socket on
the external device using a SCART cable
(video and audio signal).
Activating a decoder
If a decoder is connected to the »AV1/S-VHS«
socket, this must be activated to provide an
unencrypted video/audio signal.
1 Open the menu with »MENU«.
2 Select the menu item »SETTINGS« with »
V
«
or »
Λ
« and press
»OK«
to confirm.
The »SETTINGS« menu appears.
3 Select the line »Decoder« with »
V
« or »
Λ
«.
4 Activate the function with »
<
« or »
>
« (»On«).
5 Press »MENU« to end the setting.
... with S-Video signal
7
Suitable devices: DVD player/recorder, video
recorder, camera recorder, notebook, PC.
7
Video signal: Y/C.
7
Audio signal: stereo, analogue.
7
»S-VHS« preset.
1 Connect the » AV1/S-VHS« socket on the
television and the corresponding socket on
the external device using an EURO/AV ca-
ble (video and audio signal).
59
ENGLISH
OPERATION USING EXTERNAL DEVICES
-----------------------------
... with an analogue TV signal
7
Suitable devices: Digital satellite receiver,
DVD player/recorder, set-top box, camera
recorder.
7
Video signal: CVBS.
7
Audio signal: stereo, analogue.
7
»AV2« preset.
1 Connect the »Video« socket on the
television to the corresponding socket of the
external device with an RCA cable (video
signal).
2 Connect the »L R« sockets on the television
to the corresponding sockets of the external
device with RCA cables (audio signal).
Note:
7
There must not be a video signal at the »AV2«
and »AV1/S-VHS« socket at the same time.
This could lead to picture disturbances.
Using a DVD player,
DVD recorder, video recorder or
set-top box
1 Switch on the external device and select the
function you wish to use.
2
Press
» «
, use
»
V
«
,
»
Λ
«
,
»
<
«
or
»
>
« to
select the preset for the input signal (»AV1«,
»AV2«, »S-VHS«, »HDMI1«, »HDMI2«,
»HDMI3«, »HDMI4« or »Component«)
and press
»OK«
to confirm.
Headphones
Connecting the headphones
1 Plug the headphone jack (3.5 mm ø jack
plug) into the headphone socket on the tel-
evision.
Changing the headphone volume
1 Open the menu with »MENU«.
2 Select the menu item »SOUND SETTINGS«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOUND SETTINGS« menu appears.
4 Select the line »Headphone« with »
V
« or
»
Λ
«.
5 Set the preferred volume with »
<
« and »
>
«.
6 Press »MENU« to end the setting.
Note:
7
Prolonged listening with headphones at loud
volumes can damage your hearing.
ENGLISH
60
Hi-fi System
Connecting digital multi-channel
amplifier/AV receiver
With this connection, you can playback the
audio signal of the television channel via the
HDMI cable sur the multi-channel amplifier or
the AV receiver.
1 Connect the »HDMI2 (ARC)« (HDMI
Audio Return Channel) socket to the relevant
socket on the HDMI ARC compliant Digital
multichannel amplifier / AV receiver with a
standard HDMI cable (digital audio signal);
or
2 Connect the »Optic Out« socket on the
television to the corresponding socket on the
AV receiver using a standard optic digital
cable (digital audio signal).
Important:
7
Do not use a HDMI cable longer than 5 m
for HDMI ARC connection.
Apply the device with HDMI ARC
function and activate HDMI ARC
1 Switch on the the multi-channel amplifier
or the AV receiver. If a Blu-ray Player is
connected on the AV receiver, the player
must be switched on, too.
2 Open the Tools menu with »TOOLS«
button.
3 Select the menu item »CEC« with »
V
« or
»
Λ
« and confirm with »OK«.
The »HDMI CEC Device List« appears.
4 Start device search with »
« (red) button.
Audio device connected to the »HDMI2
(ARC)« source shall be displayed in the
list.
OPERATION USING EXTERNAL DEVICES
-----------------------------
Notes:
7
If the audio system also has a playing
function (e.g. Home theater system
including DVD player function), two devices
will be listed on the HDMI CEC list. The first
one is the player, and the second one is the
audio playback.
7
If a Blu-ray Player is connected to the AV
receiver, please remove the Disc from the
Player during the registration.
5 Press »MENU« button to exit the HDMI
CEC device list.
6 Open the menu with »MENU« button.
7 Select the menu item »SOUND SETTINGS«
with »
V
« or »
Λ
« and confirm with »OK«.
The menu appears.
8 Select the line »Audio Output Setup« with
»
V
« or »
Λ
« and confirm with »OK«.
The menu appears.
9 Select the line »ARC« with
V
« or »
Λ
«.
10 Select the setting »On« with »
<
« or »
>
«.
Notes:
7
The internal speakers of the television are
switching off automaticaly.
7
The volume of the AV receiver you can
adjust with the remote control of the
television.
7
For switching off the HDMI ARC function
select »Off« with »
<
« or »
>
«.
7
The ARC function will be deactivated while
switching off the television and the internal
speakers are active again.
11 Press »MENU« to end the setting.
“Dolby” and the double-D logo are trademarks of
Dolby Laboratories.
Manufactured under licence from Dolby Laboratories.
61
ENGLISH
Playing the audio signal via the
HiFi system
1 Connect the »AUDIO OUT L R« sockets on
the television to the corresponding socket of
the AV receiver with an RCA cable (digital
audio signal).
Note:
7
If this function is not activated, the audio sig-
nal is transmitted to the HiFi system/AV re-
ceiver (connected to »AUDIO OUT L R«).
1 Open the menu with »MENU«.
2 Select the menu item »SOUND SETTINGS«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOUND SETTINGS« menu appears.
3 Select the line »Audio Output Setup« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The menu appears.
4 Select the line »Audio Out« with »
V
« or »
Λ
«
and press »
<
« or »
>
« to activate the audio
output (»Line Out«).
5 Select the line » Audio Out Status« with »
V
«
or »
Λ
« and select the option »Fixed« or »Ad-
justable« with »
<
« or »
>
«.
Notes:
7
If you select »Adjustable«, the volume can
be changed in the menu option » Audio Out
Volume«.
7
If the audio should only be output via the
HiFi system/AV receiver, select the option
»Ofin the line »TV Speaker with »
<
« or
»
>
«.
6 Press »MENU« to end the setting.
OPERATION USING EXTERNAL DEVICES
-----------------------------
ENGLISH
62
Connecting a PC
1 Connect the »PC-IN« socket on the television
to the corresponding socket on the PC using
a VGA cable (video signal).
2 Connect the »Audio« socket on the televi-
sion to the corresponding socket on the PC
using a suitable cable (audio signal).
Note:
7
Adjust your PC to the monitor (for example,
picture resolution 1280 x 768, picture fre-
quency 60 Hz).
Selecting presets for the PC
1 Press » « and use »
V
«, »
Λ
«, »
<
« or »
>
«
to select the preset »PC« and press
»OK«
to
confirm.
Settings for PC mode
1 Open the menu with »MENU«.
2 Select the line »SOURCE SETUP« item with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the function or setting with »
V
« or
»
Λ
«, and then use »
V
«, »
Λ
« or »
<
«, »
>
« to
implement it.
OPERATION AS A PC MONITOR
----------------------------------------------------------
Options:
»Auto Ajusfor automatic PC configura-
tion.
»Auto
Ajust
Mode«, select the option
»On« if the configuration should be imple-
mented automatically in PC mode.
»Position« to configure the horizontal and
vertical picture position.
»Size« to set the cycle frequency.
»Phase« to eliminate flicker, unfocused
pictures or horizontal interference.
4 Press »MENU« to end the setting.
Source
PC
Position
Auto Ajust
Auto
Ajust
Mode
On
Size
Phase
0
30
Exit
Back
SOURCE SETUP
Extended settings
50H - 50V
20.09.2010
15:46
63
ENGLISH
OPERATION WITH A COMMON INTERFACE
------------------
What is a Common Interface?
7
Common Interface (CI) is an interface for
DVB receivers.
7
Encrypted channels can only be viewed
with a CA module suitable for the encryp-
tion system and in conjunction with the
corresponding smart card.
7
The television set is equipped with a Com-
mon Interface slot into which CI modules
from various providers can be inserted.
7
You can insert the provider’s smart card into
the CA module in order to enable the en-
crypted channels you wish to view.
Inserting the CA module
Note:
7
Switch the device off before you insert a CA
module into the »CI« slot.
1 Insert the corresponding smart card into the
CI module.
2 Insert the CI module with the smart card into
the »CI« slot on the television.
Note:
7
In the »CA Module« sub-menu you can see
which CA module has been inserted in the
CI slot.
7
If you are inserting a CA module into the
CI slot of the television for the first time,
you will need to wait a moment until the
CA module is detected.
Access control for CI module and
smart card
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »CA-Module« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
Notes:
7
This menu provides operating instructions
and after you enter your PIN code ac-
cess to the PAY-TV provider's channels.
7
The remaining settings are described in the
operating manuals for your CI module and
smart card.
7
The CA modul is not supported in certain
countries and regions; please consult your
authorised dealer.
4 Press »MENU« to end the setting.
ENGLISH
64
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Searching for digital television
channels from a satellite
automatically
Satellite data changes frequently, new channels
are constantly being added. You should
therefore perform an automatic search from time
to time.
This searches all transponders for new channels.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
Source
Satellite
Automatic Channel Search
Antenna Settings
Signal Information
Digital Manual Tuning
Program Table
Automatic Service Update
Exit
Back
SOURCE SETUP
CA -Module
Not Inserted
Off
08.08.2012
15:46
OK
HBB TV Settings
3 Select the line »Source« with »
V
« or »
Λ
«
and press
»OK«
to confirm.
Select the input source »Satellitwith »
<
«,
»
>
«, »
V
« or »
Λ
« and press
»OK«
to con-
firm.
4 Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The menu appears.
5 Select the line »Select Satellites« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
The »SELECT SATELLITE« menu appears.
6 Select a satellite with »
V
« or »
Λ
« and press
»OK«
to confirm.
7 Select the line »Scan Mode« with »
V
« or
»
Λ
«.
Select the scan mode with »
<
« or »
>
«
(for unencrypted channels, for encrypted
channels only, or both).
8 Select the line »Service Type« with »
V
« or
»
Λ
«.
Use »
<
« or »
>
« to select whether you
want to search for television channels (TV)
only, radio stations only (Radio) or both
(Radio + TV).
9 Select the line »Network Search« with »
V
«
or »
Λ
«.
Select the option »On« with »
<
« or »
>
«
If the »Network Search« is set to »On«,
the data will be accessed via the new tran-
sponder of the network which has been
set.
10 Start the scan with »
« (red).
Note:
7
If the previously stored channels should be
retained in the channel list and the new
channels found be added to it, then press
»

« (green).
If »
« (red) is pressed, the saved channels
will be deleted from the current channel list.
The »Results« menu appears, and the scan
for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
The search is complete as soon as the
»PROGRAM TABLE« appears.
Note:
7
You can abort the search by pressing
»MENU«.
11 Press »MENU« to end the setting.
65
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Searching for digital television
channels from a satellite manu-
ally
If you know the parameters of a new television
channel, you can also search for it manually.
Current transponder data can be found in the
teletext, in satellite TV magazines or on the
Internet.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Digital Manual Tuning « with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The menu appears.
4 Select the line required for the parameters
with »
V
« or »
Λ
«.
»Frequency (MHz)«: Enter the five-digit
frequency with »1 ... 0« .
»Symbol Rate (kS/s)«: Enter the five-digit
symbol rate with »1 ... 0« .
»Polarization«: Use »
<
« or »
>
« to set the
polarisation to »Horizontal« or »Vertical«.
»Network Search«: use »
<
« or »
>
« to se-
lect the option »On« or »Off«.
»Scan Mode«: Use »
<
« or »
>
« to select
whether you want to search for unencrypt-
ed (Unencrypted) channels only, encrypt-
ed (Encrypted) channels only, or for both
(Unencrypted + Encrypted).
»Service Type«: Use »
<
« or »
>
« to select
whether you want to search for television
channels only (TV), radio stations only
(Radio), or both (Radio + TV).
5 Start the scan with »
« (red).
The »Results« menu appears, and the scan
for TV channels begins.
Note:
7
You can abort the search by pressing
»MENU«.
6 Press »MENU« to end the setting.
LNB settings
Notes:
7
The following description about the LNB
settings premise a substantial expertise
about the satellite systems. Ask your
specialist dealer.
7
Your TV supports SCR system (Satellite
Channel Router). If you are using SCR
satellite system, follow the steps described
in »LNB Type« section.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Antenna Settings« with »
V
«
or »
Λ
« and press
»OK«
to confirm.
The »ANTENNA SETTINGS« menu ap-
pears.
4 Select the line required for the parameters
with »
V
« or »
Λ
«.
»Satellite«: »Press
OK
«, select a satellite
with »
<
«, »
>
«, »
V
« or »
Λ
« and press
»OK«
to confirm.
»Transponder«: »Press
OK
«, select a tran-
sponder with »
<
«, »
>
«, »
V
« or »
Λ
« and
press
»OK«
to confirm. Use »
« (red) to
add a transponder, use »

« (green) to
delete it, or use »

« (yellow) to change
transponder data.
»LNB Power«: Set the LNB power supply
(depending on the type of LNB) to »Of
»13/18 V« or »14/19 V« with »
<
« or »
>
«.
»LNB Type«: Select the LNB type used
in the satellite system with »
<
« or »
>
«. If
you are using a satellite antenna with an
Single Cable Distribution multiswitch, select
the setting »Grundig SCR«. After it, please
perform the »User Band«, »KB Frequency«
and »LNB Selection« settings in the
submenus. The necessary parameters you
will get from the operator of the satellite
antenna. Use only this specification!
»User Band«: Select the user band
number assigned to the user with »
<
«
or »
>
«.
ENGLISH
66
»KB Frequency (MHz)«: Enter the user
band frequency assigned to the user
band with »1...0« buttons.
»LNB Selection«: If more than one
satellites are used in the current SCR
system, select »1/2« to»2/2« for the
satellite corresponding to the relevant
positions using »
<
« or »
>
« buttons.
Notes:
7
Use installation equipment supported /
suggested by your Multiswitch.
7
Other users / receivers connected to the
system may be affected if the specified user
band number and frequency is changed
during installation.
7
User band and User band frequency is
specified on the Multiswitch used; and
each user / receiver uses a specified user
band and user band frequency.
7
With SCR satellite system, auto search by
several users / receivers at the same time
may cause problems.
»22 KHz«: Depending on the LNB type,
22 kHz audio is selected. For a univer-
sal LNB, this option is set to »Auto« and
cannot be changed.
»DISEqC mode« and »LNB selection«:
depending on the type of antenna used,
use »
<
« or »
>
« select the option »Off«,
»DiSEqC 1.0« or »DiSEqC 1.1«.
»Off«: for a satellite system with only
one antenna.
» DiSEqC 1.0«: allows up to four satel-
lites to be received simultaneously.
Under »LNB selection«, use »
<
« or
»
>
« to select the option »1/4«, »2/4«,
»3/4« or »4/4«.
» DiSEqC 1.1«: allows up to 16 satel-
lites to be received simultaneously.
Under »LNB selection«, use »
<
« or
»
>
« to select the option »1/16« to
»16/16«.
5 Press »MENU« to end the setting.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Settings for motorised antennas
(DiSEqC 1.2)
Your television set supports motorised satellite
systems in compliance with DiSEqC 1.2. This
function allows the satellite antenna to be oper-
ated via the television set.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Antenna Settings« with »
V
«
or »
Λ
« and press
»OK«
to confirm.
4 Select the line »DiSEqC Mode« with »
V
« or
»
Λ
«. Select the option »DiSEqC1.2« with
»
<
« or »
>
«
The line »DiSEqC 1.2 SETTINGS« is active.
Notes:
7
Additional operations are explained in the
following sections.
7
The following description about the DiSEqC
1.2 settings premise a substantial expertise
about the satellite systems. Ask your
specialist dealer.
67
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
DiSEqC 1.2 Settings
You can adjust the alignment of the satellite an-
tenna to each individual satellite. These settings
will be saved so that the antenna can later be
easily guided to each saved alignment.
1 Select the line »DiSEqC 1.2 SETTINGS« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »DiSEqC 1.2 SETTINGS« menu ap-
pears.
2 Select the preferred option with »
V
«
or »
Λ
«.
»Transponder«: »Press
OK
«, select the
transponder from which the signal is being
received with »
<
«, »
>
«, »
V
« or »
Λ
« and
press
»OK«
to confirm.
»Moving Mode«: Use »
<
« or »
>
« to select
the option »Discrete« or »Continuous«.
»Discrete«: Moves the antenna in
defined steps to the west and the east.
»Continuous«: Moves the antenna to the
west or east continuously.
»Step Size«: Use »
<
« or »
>
« to select the
number of steps with which the antenna
should turn. »Step Size« is only active
when the »Transport Mode« was set to
»Discrete«.
»Move Motor«: Aligns the antenna with
the selected satellite. Use »
<
« to align it to
»West«, use »
>
« to align it to »East«.
»Go To Stored Position«: Aligns the antenna
to a saved satellite position. Up to 50 posi-
tions can be saved. »Press
OK
« and then
select the saved position with »
<
« or »
>
«.
Press »

« (green) to confirm the anten-
na will be aligned with the saved position.
»Store Stored Position«: The current anten-
na alignment is saved.
»Limit Position«: Defines the range in
which the antenna may move. Use »
<
«
to set the western limit, use »
>
« to set the
eastern limit.
»Reset DiSEqC 1.2 Limit«: Resets the limit
position of the antenna.
3 Press »MENU« to end the setting.
Searching for television chan-
nels from the cable provider
automatically
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
V
«
or »
Λ
« and press
»OK«
to confirm.
Select the option »Cable« with »
<
«, »
>
«,
»
V
« or »
Λ
« and press
»OK«
to confirm.
4 Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The menu appears.
Scan Type
Exit
Back
SOURCE SETUP
AUTOMATIC CHANNEL
SEARCH
Country
Connection Type
Frequency (MHz)
Cable Scan Type
Network ID
U.K.
Cabel
Auto
Quick
Auto
08.08.2012
15:46
Start Search
DTV & ATV
5 Select the line »Scan Typ« with »
V
« or »
Λ
«
and set the option »DTV« with »
<
« or »
>
«.
6 Select the line »Cable Scan Type« with »
V
«
or »
Λ
« and set the option »Quick« or »Full«
with »
<
« or »
>
«.
The search function »Quick« sets the channels
according to the information provided by your
cable provide in the transmission signal.
If the option »Full« is selected, the entire fre-
quency range will be scanned. The search
can take a long time with this option. This
option is recommended if your cable pro-
vider does not support the search type
»Quick«
.
ENGLISH
68
Note:
7
You can accelerate the search. To do this,
you need information about the frequency
and
network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet. For example, the
frequency 402MHz and network ID 61441
can be entered for Germany.
7 Start the scan with »
« (red).
All channel and favourites lists will be
deleted and compiled anew.
Note:
7
After starting the scan, a security query will
appear. Press »

« (green) to confirm the
option »Yes«.
The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
7
You can abort the search by pressing
»MENU«.
8 Press »MENU« to end the setting.
Searching for television channels
from the cable provider manu-
ally
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
V
« or »
Λ
«
and press
»OK«
to confirm.
Select the option »Cable« with »
<
«, »
>
«,
»
V
« or »
Λ
« and press
»OK«
to confirm.
4 Select » Digital Manual Tuning« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
The menu appears.
5 Enter the four-digit frequency with »1 ... 0«.
The search starts after confirming, the
channels found are displayed in the »Re
-
sults« menu.
6 Press »MENU« to finish the setting.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
69
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Searching for digital terrestrial
TV channels automatically
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
V
«
or »
Λ
« and press
»OK«
to confirm.
Select the option »Air« with »
<
«, »
>
«, »
V
« or
»
Λ
« and press
»OK«
to confirm.
Caution:
7
The antenna power supply (line »Active
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4 Select the »Active Antenna Power« with »
V
«
or »
Λ
«. Switch on the antenna power supply
for the antenna with »
<
« or »
>
« (»On«).
5 Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The menu appears.
Exit
Back
SOURCE SETUP
AUTOMATIC CHANNEL
SEARCH
20.09.2010
15:46
Start Search
Scan Type
Country
Connection Type
U.K.
Air
DTV & ATV
6 Select the line »Scan Typ« with »
V
« or »
Λ
«
and set the option »DTV« with »
<
« or »
>
«.
7 Start the scan with »
« (red).
All channel and favourites lists will be
deleted and compiled anew.
Note:
7
After starting the scan, a security query will
appear. Press »

« (green) to confirm the
option »Yes«.
The »Reults« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
The scan is complete as soon as the
»PROGRAM TABLE« appears.
Note:
7
You can abort the search by pressing
»MENU«.
8 Press »MENU« to end the setting.
Automatic service update
If this function is activated, possible changes of
network operators are updated automatically.
The unit must be located in stand-by mode.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP
«
with »
V
« or »
Λ
« and press
»OK«
to
confirm.
3 Select the line »Automatic Service Update«
with »
V
« or »
Λ
«.
4 Select the automatic update with »
<
« or »
>
«
(»On«).
5 Press »MENU« to end setting.
ENGLISH
70
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Searching for digital terrestrial
TV channels manually
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
V
« or »
Λ
«
and press
»OK«
to confirm.
Select the option »Air« with »
<
«, »
>
«, »
V
« or
»
Λ
« and press
»OK«
to confirm.
Caution:
7
The antenna power supply (line »Active
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4 Select the »Active Antenna Power«« with
»
V
« or »
Λ
«. Switch on the antenna pow-
er supply for the antenna with »
<
« or »
>
«
(»On«).
5 Select » Digital Manual Tuning« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
The menu appears.
6
Enter the channel number directly with
»
1 ... 0«.
After the search is complete, the channels
found are displayed in the »Results« menu.
7 Press »MENU« to finish the setting.
Tuning analogue television
channels
This setting is only necessary if you cannot re-
ceive any digital channels and you have not car-
ried out an analogue search during initial setup.
The television channels can be set directly or
using the scan.
Switching the television to
analogue reception
Note:
7
Analogue channels can be selected if the
option »Air« or »Cable« has been selected.
1 Open the »Select input source« menu with
»
«.
2 Depending on the antenna system, select the
option »Air« or »Cable« with »
V
«, »
Λ
«, »
<
«
or »
>
« as the input source and press
»OK«
to confirm.
Note:
7
Additional operations are explained in the
following sections.
Setting all analogue television
channels
Analogue channels are displayed in the channel
list after the digital channels.
Note:
7
Plug the rooftop antenna cable (for analogue
television channels) into the »ANT IN«
socket on the television.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
V
« or »
Λ
«
and press
»OK«
to confirm.
Select the option »Air« or »Cable« with »
<
«,
»
>
«, »
V
« or »
Λ
« and press
»OK«
to con-
firm.
71
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Tuning the television channels by
entering the channel numbers
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line » Analogue Manual Tuning«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The menu appears.
Program No
TSystem
Band
Channel
Fine Tuning
1
INSTALLATION
ANALOGUE MANUAL TUNING
BG
C
2
0
Auto Previous
Auto Next Store
48.25 MHz
4 Select the line »Program No« by pressing »
V
«
or »
Λ
« and use »
<
« or »
>
« to save the preset.
5 Select »Band« by pressing »
V
« or »
Λ
« and
use »»
<
« or »
>
« to choose between »S«
(special channel) or »C« (normal channel).
6 Select the line »Channel« with »
V
« or »
Λ
«
and enter the channel number with »
<
« or »
>
«
step by step, or use »1…0« to enter the chan-
nel number directly, or
start a automatic scan with
»

«
(green) oder
»

«
(yellow)
.
Notes:
7
The current system is displayed in the
»System« line. If the colour or sound is
not functioning properly, select the line
»System« with »
V
« or »
Λ
«. Use »
<
« or »
>
«
to select the preferred setting.
7
If fine tuning is necessary, select the line
»Fine Tuning« with »
V
« or »
Λ
« and use »
<
«
or »
>
« to make the setting.
7 Press »

« (blue) to save the setting.
4 Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
Automativ Channel Search
Source
Automatic Service Update
CA - Modul
Active Antenna Power
Analogue Manual Tuning
Signal Information
Digital Manual Tuning
Program Table
Exit
Back
SOURECE SETUP
20.09.2010
15:46
Air
On
Not inserted
Off
OK
5 Select the line »Scan Typ« with »
V
« or »
Λ
«
and set the option »ATV« with »
<
« or »
>
«.
6 Start the scan with »
« (red).
Note:
7
After starting the scan, a security query will
appear. Press »

« (green) to confirm the
option »Yes«.
All channel and favourites lists for the ana-
logue channels will be deleted and com-
piled anew.
The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
The search is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
7
You can abort the search by pressing
»MENU«.
7 Press »MENU« to end the setting.
ENGLISH
72
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Entering channel names (8 digit
maximum)
1 In the »PROGRAME TABLE« menu, select the
television channel with »
V
«, »
Λ
«, »
<
« or
»
>
« and press »
« (red) to confirm.
2 Open the input keyboard with »

« (green).
Note:
7
If necessary, delete the current channel
name. To do this, select the »
« button
with »
<
« or »
>
« and delete repeatedly using
»OK«
.
3 Select the required letters or numbers with
»
V
«, »
Λ
«, »
<
« or »
>
« and confirm with
»OK«
.
Repeat the entry for further letters/numbers.
Note:
7
Use the »ABC« button to switch to upper
case letters and use the »?@123« button to
switch to symbols and numbers.
4 Save the channel name by using »
V
«, »
Λ
«,
»
<
« or »
>
« to select »Submit« and confirm
with
»OK«
.
Note:
7
If you wish to enter other channel names,
repeat steps 1 to 4.
Skipping television channels
You can highlight television channels to be
skipped when you select with »
Λ
« or »
V
«.
Selection is still possible using the number
buttons.
1 In the »PROGRAME TABLE« menu, switch over
to the list view with »

« (yellow).
2 Select the preferred channel with »
V
«
or »
Λ
«.
3 Select the column »Skip« with »
<
« or »
>
«
and use
»OK«
to mark the channel.
– The channel is marked using »«.
Note:
7
Channels can also be reactivated. Select the
channel with »
V
« or »
Λ
«, then select the
column »Skip« and reactivate the channel
with
»OK«
.
Note:
7
If you wish to remedy other television
channels, repeat steps 4 to 7.
8 Press »MENU« to end the setting.
Changing stored analogue
channels
If channels were stored with the automatic chan-
nel search while tuning the television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
Selecting a channel list
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Program Table« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
The »PROGRAME TABLE« menu appears.
Note:
7
Additional operations are explained in the
following sections.
Deleting channels
1
In the »
PROGRAME TABLE
« menu, select the
television channel to be deleted with
»
V
«,
»
Λ
«, »
<
« or »
>
« and press »
« (red) to con-
firm.
2 Delete the selected channel by pressing
»

« (yellow).
Note:
7
»

« (blue) allows all television channels
to be deleted.
3 Press »

« (green) to confirm the deletion
process.
73
ENGLISH
Displaying signal information
(for digital channels only)
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
3 Select the line »Signal Information« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
Information on the channel, network,
modulation, symbol rate, quality and
signal strength is displayed.
Notes:
7
The signal information changes in ac cord-
ance with the current input source.
7
The signal properties are displayed in the
lower section of the menu. The further the
bars for »Quality« and »Signal Strenght«
extend to the right, the better the reception
signal.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna based upon
the signal level display.
4 Press »MENU« to close the menu.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
Creating lists of favourites
You can select your favourite channels and save
them in up to four favourites lists (Fav 1 to Fav 4).
1 In the »PROGRAME TABLE« menu, switch
over to the list view with »

« (yellow).
2
Select the preferred channel with
»
V
«
or
»
Λ
«
.
3 Use »
<
« or »
>
« to ”push“ the channel into
one of the favourites lists 1 to 4 and press
»OK«
to confirm.
The position in the favourites list is marked
with »«.
You can enter the same channel in more
than one favourite list.
Each favourite list can store up to
250 channels.
Note:
7
Channels can also be deleted from favour-
ites lists. Select
the
channel to be deleted
with »
V
«, »
Λ
«, »
<
« or »
>
«
and delete it with
»OK«
.
Exiting the settings
1 Press »MENU« to end the setting.
ENGLISH
74
Deactivate and activate HbbTV
This option allows switching off HbbTV feature,
the hint for HbbTV function shall not be dis-
played during selecting the channels.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press »OK« to confirm.
3 Select the line »HBB TV« with »
V
« or »
Λ
«.
4 Select the option (»Off«) with »
<
« or »
>
«.
5 Press »MENU« to end the setting.
Note:
7
To activate HbbTV again, select in step. 4
the option »On«.
Deactivate and activate digital
teletext
If you deactivate digital video text, only normal
video text can be selected, however the other
functions of the interactive service HbbTV are still
available.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press »OK« to confirm.
3 Select the line »Digital Teletext« with »
V
« or
»
Λ
«.
4 Select the option »Off« with»
<
« or »
>
«.
5 Press »MENU« to end the setting.
Note:
7
To activate Digital Teletext again, select in
step. 4 the option »On«.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
75
ENGLISH
INFORMATION
---------------------------------------------------------------------------------------------------------------------
GRUNDIG 50 VLE 941 BL
Product Fiche
Energy Efficiency class:
A+
Screen size:
127 cm/50 inch
Screen (dm²):
67 dm²
Operating voltage:
220–240 V,
~
, 50–60 Hz
Power consumption:
On mode 72 W
Standby <0.50 W
Off-Mode 0 W
Maximum power consumption
On mode 145 W
Annual power consumption
105 kWh
Maximum resolution:
WUXGA, 1920 x 1080
Rohs Limits: Pb (Lead)/Hg (Mercury)
Pb meets ROHS directive / 0 mg
Peak luminance ratio:
65 %
Other information
Audio output:
2 x 20 W music power output
2 x 10 W Sine wave power + 10 W sine
wave power (Subwoofer)
Subwoofer is optional, it is not available in all
products.
Default satellite:
20
LNB power supply:
13/18 V, 14/19 V optional, maximum 500 mA
LNB switching signal:
0/22 kHz 650mV +/- 250mVpp
DiSEqC:
1.0-operation, 1.1-operation, 1.2-operation
Digital reception ranges
Satellite:
Ku band: 10,700 MHz – 12,750 MHz
Modulation: DVBS QPSK, DVBS2 QPSK,
8 PSK
IF band: 950 MHz – 2,150 MHz
Signal level: -25dBm to -65 dBm
Cable:
Overall band: 110 MHz – 862 MHz
Modulation: 16QAM, 32QAM, 64QAM,
128QAM and 256QAM
Symbol rate: 4.0 Msym/s to 7.4 Msym/s
Terrestrial (DVB-T):
VHF/UHF band, Bandwidth 7 MHz
and 8 MHz
FFT Size: 2k, 8k
Modulation: 16QAM, 64QAM, QPSK
Guard Interval: 1/4, 1/8, 1/16, 1/32
Terrestrial (DVB-T2):
VHF/UHF band, Bandwidth 7 MHz
and 8 MHz
FFT Size: 1k, 2k, 4k, 8k, 16k, 32k
Modulation: 16QAM, 64QAM,
256QAM, QPSK
Guard Interval: 1/4, 19/256, 1/8, 19/128,
1/16, 1/32, 1/128
As this feature is optional, it is not available in
all products.
Analogue reception ranges:
C02 ... C80, special channels S01 ... S41
Preset channels:
All Channels 6000 (Satellite – DVB-S),
1000 (Cable – DVB-C) or
99 (Analogue)
1000 (Terrestrial – DVB-T) or
99 (Analogue)
9 AV, 2 USB
Weight:
approx. 22 kg
Dimensions:
W H D 113,6 cm 66,9 cm 5,2 cm
Technical changes and errors reserved.
ENGLISH
76
INFORMATION
---------------------------------------------------------------------------------------------------------------------
Service information for dealers
The product complies with the
following EU directives and
regulations:
2006/95/EC: Directive on the
harmonisation of the laws of Member States re-
lating to designed for use within certain voltage
limits.
2004/108/EC: Directive relating to electro-
magnetic compatibility.
2009/125/EC: Ecodesign requirements
for energy-using products;
Implementing Reg (EC) No 642/2009: Ecodes-
ingn requirements for Televisions;
Implementing Reg (EC) No 278/2009: Ecodes-
ingn requirements for no-load condition electric
power consuption and average active efficiency
of external power supplies. (for models with AC/
DC external adaptor)
2010/30/EU: Directive on the indication by la-
belling and standard product information of the
consumption of energy and other resources by
energy-related products;
Supplementing Reg (EC) No 1062/2010 En-
ergy Labelling of televisions.
2011/65/EU: Restriction of the use of certain
hazardous substances in electrical and elec-
tronic equipment.
Network interfaces
This product is intended for connection to the
ADSL network.
Note for the Product Package
Packaging materials of your product are recy-
clable. Please ensure that packaging materials
of your product are disposed of separately in
accordance with the regulations set by the local
authorities in order to have the packaging mate-
rials included in the environmental friendly recy-
cling process.
Environmental note
This product has been made
from high-quality parts and ma-
terials which can be re-used
and recycled.
Therefore, do not dispose of the
product along with normal household waste at
the end of its service life. Take it to a collection
point for the recycling of electrical and electronic
equipment. Dispose of the used device at a collec-
tion point for electrical and electronic equipment.
The symbol on the product, in the operating man-
ual or on the packaging indicates that recycling
is possible.
Information on collection points is available from
your local authorities.
Help protect the environment by recycling used
products.
77
ENGLISH
INFORMATION
---------------------------------------------------------------------------------------------------------------------
Troubleshooting
If the information provided below does not help, please consult an authorised GRUNDIG dealer.
Please bear in mind that malfunctions can also be caused by external devices such as video recorders
or satellite receivers.
Problem Possible cause Remedy
Screen lit (snow), but no station
visible
Antenna cable Is the antenna cable connected?
No TV channel tuned Start a channel scan
Insufficient contrast in picture The picture settings are not correct Adjust the brightness, contrast or colour
setting
Problem at station Try another channel
Picture and/or sound distorted Interference from other devices Place the device in a different position
Ghosting, reflection Channel setting
Automatic or manual tuning/fine tuning
Antenna
Have antenna cable or system checked
No colour Colour intensity too low Turn up the colour
Adjust TV standard (if setting option is
available)
Select the correct colour standard
Problem at station Try a different channel
Picture but no sound Volume is set to a minimum Turn up or switch on the volume
Teletext impaired or absent Problem at station Try a different channel
Television channel (no teletext)
or antenna system
Try with a different TV channel,
carry out fine tuning
Station signal too weak Check antenna
The remote control does
not work
Obstacle between remote control and
device.
Point remote control at television
Battery problem
Check batteries and replace if
necessary
Operating mode undefined Switch off the television at the mains
switch for two minutes
Picture too dark in PC mode Incorrect setting for picture resolution
and picture frequency on the PC
Change settings on the PC
(e.g. 1280 x 768 resolution,
refresh rate 60 Hz)
DMS device cannot be found DMS device is not switched on or
not started
Make sure that the DMS device is on
and operating.
Network connection settings are not
made.
Check the network settings.
ENGLISH
78
Problem Possible cause Remedy
Low image quality (pixel) in
WLAN mode
Signal is lost based on structural
conditions.
Place the modem so that the signal to
the television is not interrupted.
Internet connection speed low. Low Internet speed is a problem that
is related with the speed of your sub-
scription or a failure in the Internet in-
frastructure. Contact with your service
provided (ISP).
DMS (for example PC) is connected
to the wireless network and away
from the modem
Bring your DMS closer to the modem
Warnings about the connec-
tion problems on the display
Network Cable or wireless USB net-
work device may be disconnected
Check network cable or wireless USB
network device
Modem does not have Internet con-
nection or has problems
Make sure that your modem has In-
ternet connection
Videos in video aplications
are lagging during playback
in wired connection
Internet connection speed low Low Internet speed is a problem that
is related with the speed of your sub-
scription or a failure in the Internet in-
frastructure. Contact with your service
provided (ISP).
There are connection prob-
lems in inter@ctive applica-
tions
This may occur due to temporary
problems in servers of these applica-
tions
Try connecting to the applications
again
Note:
7
This is a Class A product. During operation the device can cause radio interference. In this case
the user may have to remedy this. Please contact your specialist dealer.
INFORMATION
---------------------------------------------------------------------------------------------------------------------
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 50 VLE 941 BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 50 VLE 941 BL in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 50 VLE 941 BL

Grundig 50 VLE 941 BL User Manual - German - 79 pages

Grundig 50 VLE 941 BL User Manual - French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info