569843
85
Zoom out
Zoom in
Previous page
1/97
Next page
85
ENGLISH
»LNB Selection«: If more than one
satellites are used in the current SCR
system, select »1/2« to»2/2« for the
satellite corresponding to the relevant
positions using »
<
« or »
>
«.
»LNB Power«: Set the LNB power to
»Off« or set it to »13/18V« or »14/19V«
depending on the LNB type by using »
<
«
or »
>
«.
Notes:
7
Use installation equipment supported / sug-
gested by your SCR Switch.
7
Other users / receivers connected to the
system may be affected if the specified user
band number and frequency is changed dur-
ing installation.
7
User band and user band frequency is speci-
fied on the SCR switch used; and each user
/ receiver must select a specified user band
and user band frequency.
7
With SCR satellite system, auto search by
several users / receivers at the same time
may cause problems.
»22 KHz«: Depending on the LNB type,
22 kHz audio is selected. For a universal
LNB, this option is set to »Auto« and cannot
be changed.
»DISEqC Mode«: Based on the number of
current satellite system, select the option
»Off« »DiSEqC 1.0« or »DiSEqC 1.with
»
<
« or »
>
«.
»Off«: For satellite systems with single
antenna.
» DiSEqC 1.0« switch allows for receiv-
ing from maximum four satellites at
the same time.
From »LNB selection« use »
<
« or »
>
to make the »1/4«, »2/4«, »3/4« or
»4/4« selection for the satellite that
corresponds to relevant DiSEqC posi-
tions.
» DiSEqC 1.1« switch allows for receiv-
ing from maximum sixteen satellites
at the same time.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------
From »LNB selection« use »
<
« or
»
>
« to make the selections between
»1/16« and »16/1for the satellite
that corresponds to relevant DiSEqC
positions.
8 Press »EXIT« to end the setting.
Motor antenna setup
(DiSEqC 1.2)
Your television supports DiSEqC 1.2 motorized
satellite systems. This feature allows to control
the satellite through your television.
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press »OK« to confirm.
4 Select the line »Manual Channel Search«
with »
V
« or »
Λ
« and press »OK« to con-
firm.
5 Select the option »Satellite« with »
<
« or »
>
«
and press »OK« to confirm.
6 Activate the option »Antenna Settings« with
»

« (blue).
– The »Antenna Settings« menu is dis-
played.
7 Select the line »DiSEqC Mode« with »
V
« or
»
Λ
« and select »DiSEqC1.2« with »
<
« or
»
>
«.
The line »DiSEqC 1.2 SETTINGS« is ac-
tive.
Note:
7
Additional operations are explained in the
following sections.
7
Settings regarding DiSEqC 1.2 are ex-
plained below. Contact an expert or your
dealer for DiSEqC 1.2 antenna systems.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 48 VLE 7461 WL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 48 VLE 7461 WL in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 48 VLE 7461 WL

Grundig 48 VLE 7461 WL User Manual - German - 100 pages

Grundig 48 VLE 7461 WL User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info